Photoshop :: CS4 Refusing To Print 2 Specific Files?
Nov 15, 2013
I'm using Photoshop CS4 and I have 2 files that refuse to print. Every time I try to print them I get the error "Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer." Photoshop WILL print other files or new files no problem but will always produce this error when I try to print these 2 files.
It is not a problem with printer drivers, or a problem with which printer is set as default as evident but the fact that every other program on the computer can print just fine and photoshop itself has no problem printing other pictures.
View 1 Replies
ADVERTISEMENT
Aug 22, 2013
My Photoshop CS3 is suddenly refusing to launch; it gives me an error message of "Windows has detected a problem" and closes the program before it fully engages. I've attempted to uninstall and reinstall, and I've gotten the serial code sorted out, but Photoshop won't launch far enough for me to enter the code.
I don't know what to do, and I've been informed that there is no "Phone or chat" support for an older product like mine.
View 3 Replies
View Related
Jan 26, 2011
I've been working with this drawing that has 10 PS tabs. The wipeout command & textmask command works in most of the PS ports, but some of the PS ports the background shows through the mask/wipeout.
The drawing is in MS and all the Title/Borders/Dims/Text is in PS.
get my wipeouts & textmasking to work in all PS ports?
View 9 Replies
View Related
Jun 27, 2012
Using Photoshop CS5 and Windows 7. How do I get a photo file (jpg) to print at specific dimensions? For instance, I have a file open in Photoshop and it's dimensions are: width-3872 pixels and height-2592 pixels. I want to print and have the print size be 10 inches by 8 inches without distorting the image.
View 13 Replies
View Related
Dec 7, 2011
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
View 9 Replies
View Related
Feb 4, 2012
I am trying to print an image to an exact size but can't seem to get it right. I am using the resize tool but the image always appears cropped at the edges. The image is a circle. Is there a way to determine the exact size before printing?
View 3 Replies
View Related
Feb 23, 2013
I am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around.
View 2 Replies
View Related
Aug 19, 2011
How to set the printer setting in Autocad that only show ISO paper size only? Currently i am using HP DESIGNJET 800 42 and when i need to do plotting, it show me a bunch of unnessary of paper size list as shown in attachment.
View 9 Replies
View Related
Apr 5, 2013
I'm looking for a way to find out what all plot styles are set in drawings in a sheet set.
We are transitioning from color based pen settings to style based and would like to be able to export a log that shows the variable PSTYLEMODE for each drawing in a sheet set. I plan on using ScriptPro to run it on the full sheet set.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
View 2 Replies
View Related
May 25, 2012
Is there a way, when saving jpg files to save as a specific file size, rather than quality level (currently using CS5)? I have a few clients (realtors) who require files to be 100kb (or smaller... but 100kb is the ideal to shoot for) for their listings.
Given I'm working with a number of images, I would like to be able to do this as a batch, rather than one at a time, getting as close to 100 as I can without going over, as I have to at this point.
View 13 Replies
View Related
Sep 27, 2012
Elements 11. I have a folder that I want to just see images that are in aspecific album.
When I click on the folder I see every image whether or not they are in a album. That is I see all images from all albums.
How do I find the ones in the folder that are in a specific album?
View 2 Replies
View Related
Jul 5, 2013
When opening a step file and trying to save it, it keeps trying to save it in the 'My Documents/inventor' folder. Even if i select save as and pick a specific folder elsewhere it only saves the top assembly in that location and all sub assemblies and parts are then saved in the My Documents/Inventor folder.
Additional info:
I am operating Autodesk inventor pro 2013.
My project is set to a folder C:inventor workspace
And the folder i am trying to save into is in that folder
View 5 Replies
View Related
Dec 13, 2013
I started a Premiere Pro CS5 project on my PC at work. Video files played both audio and video, life was good. Unfortunately my PC at work is slow, so I want to continue working on the project on my home PC. Uploaded the needed files with Sugarsync, went home, but when I open the project here all the video files only play audio.
So I know the files CAN display video, so it must be something to do with my home computer and CS5 install? I tried reinstalling PP CS5, no change. Is there a setting I may have accidentally disabled at home to force audio only?
View 11 Replies
View Related
Sep 26, 2012
What I want to know is if there is a way to make a hotkey or at all save specific options for specific tools. Let's say I'm using the 'Paintbrush, Opacity 70%, Hardness 075, Size 4.00' as my "standard outline tool". Can I some how save that preference (and any other tool such as "Specific Eraser Op. 100%, Hard. 100, Size 10.00) so that I can easily switch between "Ouline Brush" and "Specific Eraser" . Maybe to the 'f-buttons'
I'd like to be able to make maybe 5 specific tools:-Outline Brush
-Small Eraser
-Big Eraser
-Detailed Color brush
-Big Color Brush.
View 4 Replies
View Related
Nov 27, 2013
Im using Autocad Structural Detailing 2013. Its is possible to make specific command to start at specific layers?
EX: Breakline ,by default start at "LAYER 88".
Polyline ,by default start at "LAYER 150".
View 2 Replies
View Related
Dec 29, 2011
I have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
View 4 Replies
View Related
Feb 3, 2014
Any way to batch rename a folder full of image files to reflect a specific column in an excel sheet? I have a client who I am shooting product photography for, but I need to rename these images to reflect the part number of each item. These are not in any sequential order.
Either using LR5, CS6 or Bridge.
View 1 Replies
View Related
Jul 6, 2012
I recently installed Lion OSX 10.7.4 and can no longer print image files from Photoshop
View 2 Replies
View Related
Dec 22, 2012
I have PSE 10. I'm trying to change a layout to customize my output. I'm the admin but I get the following error when trying to save a change. "You don't have permission to save in this location. Contact your admin for permission". I checked the file properties and the only box not checked is the special permissions which is grayed out. I see info saying this is how you modify the layouts but not sure why mine isn't accepting.
View 10 Replies
View Related
Oct 27, 2005
Is there a way to batch print all of them, multiple files per page in thumbnail or so size?
View 1 Replies
View Related
Oct 29, 2012
I am trying to import thousands of pictures into Lightroom as I have a mess of pictures do to a long story...But basically I have probably 30,000 pictures in a bunch of folders that I want to import.
One issue I have found is that I don't want to import TIFF, BMP, GIF, or things like PNG. I really only want jpg files or jpeg files unless I stumble across others in another format I haven't found yet.
Can I set something during the import? I have searched the forums and internet, but haven't found anything that mentions this.
How to clean up a mess like this where I have 30,000 pictures but probably only need 10,000 as there are duplicates upon duplicates due to having to move the pictures around in a hurry as I had a mess in my basement during a storm a couple years ago.
View 1 Replies
View Related
Oct 28, 2012
I am running Mac 10.6.8 and recently upgraded to PS6. I can no longer print to my Epson 3880 nor can I open NEF files. I have applied all udates from Apple, Epson and Adobe.
View 2 Replies
View Related
Sep 30, 2011
i was reading a post in which it says Gimp is not recommended for Print..
View 3 Replies
View Related
Mar 29, 2011
I have version 2002. How can I print to a pdf file so I can e-mail those files to customers?
View 5 Replies
View Related
Oct 24, 2012
Working on Macintoch with Lightroom 4.2
Before we were able to print a pdf file on Mac, even if we weren't connected to the Raw files. It was enought to click on "brouillon" in french, what is draft I think in english I think. But now with lightroom 4, I can't do it anymore. Is it another way to do it ?
It was really usefull while you were traveling, you didn't have to plug you hard drive, and it was plenty enough to show to my client.And also it was way faster, and I didn't have to travel with all my HD files.
View 6 Replies
View Related
Sep 26, 2011
I am using Autocad 2012. When I plot I go to change my plot styles, all I see is STB files. Where did the CTB files go? They are on my computer but not showing up in my style list.
View 2 Replies
View Related
Mar 5, 2013
DWG to PDF is not printing certain files correctly. It appears to only happen with the dots hatch pattern and the Dots linetype with a 0.0003" lineweight in the CTB file. The lines with the issue have color and pline width (zero). Print preview show, plotting to a printer, and using adobe show the lineweight correctly but using DWG to PDF does not.
C3D 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 8 Replies
View Related
Jan 23, 2014
I have 20-30 or more dwg files in my computer(I keep files path in a database). My question is "How can I print this files sequentially?"
I have just DWG TrueView 2014, not autoCaD. I wouldn't like open those with TrueView and plotting with mouse one by one.
I would like give a command in C# or VBA or just in cmd(command prompt), and get that the computer print my files sequentially, without any question.
View 2 Replies
View Related
Jun 24, 2013
How can I print mulitple different .ai files onto one page in Illustrator CS6? I have all of the files organized by Arrange Documents>Tile All in Grid and I would like to print the files in this format so that they can all be seen at once when printed out onto one page.
Some background is that I have 16 different cad drawings that I have converted and edited in illustrator. I'd like to basically make a contact sheet with all 16 drawings so that they can be reviewed on one sheet of paper after printing. But each drawing is in it's own unique file, and I have not figured out how to put them all onto one page for printing.
View 3 Replies
View Related
Feb 13, 2014
I have an important question about how to set up my files for print. In school I was taught to work in CMYK or at least convert whatever RGB file I'm working on to CMYK. I'm at work now and the files I am printing are coming out dull (in CMYK). I converted a file to RGB and assigned the RGB 1998 colour space and re printed it. The first CMYK print looked grey and was not vibrant. The new RGB print printed very vibrant and matched the screen colours better than the CMYK. My boss wants me to do the rest of the prints in RGB seeing as it prints with better vibrancy. Also, I am working in Illustrator.
So my question is: Can I convert all my CMYK files to RGB, send them to the printing company and expect the prints to be vibrant? Or will converting my CMYK files to RGB mess up the printing companies standards?
RGB prints better, but I was taught to always print in CMYK mode.
Actually I'm going to leave the files in CMYK since turning them into RGB may cause colour loss during the final large prints. I will print the presentation files in RGB though.
View 3 Replies
View Related
Nov 28, 2011
After successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 Replies
View Related
