I just installed it on a new computer, deactivated it on my other, and re-activated on this one.
Alot of the layer functions (overlay, soft light, etc.) don't seem to be working at all, they have the faded gray font that wont allow me to click them. Also I can't save images as png's or jpegs. Alot of the filters are experiencing the same thing.
I was making some pieces in Inventor 2013, and a lot of them had similar bases, so I would just use the derive button when I started a new piece, and just make changes to the old piece. I later saved the files as .stl 's to print them in the 3D printer. when the computer hooked up to the 3D printer brought up the pieces, the parts I had derived from the original were missing.
View 2 Replies View Relatedi am using AC2013LT and have come accross a problem with the printing. I have completed my drawings, converted them to PDF(image 1) and when i print the PDF out, there are parts of the drawing missing as image 2 shows. If i plot direct from autocad, there is no problem with the print.
View 3 Replies View RelatedI am trying to send some parts to get printed in 3D.
When I use the 'Send to 3D Print Service' button I select all the solids to get printed. I get no error message but the 3D render of the part has bits missing. See attachment.
A couple parts that I moved from one subasy to another in an IAM are not showing in the associated IPN browser at all. Yet they are visible in the edit window & look as if they have tweaks applied. I can click on & highlight them but there is no sign of them in the browser at all.
The parts are definitely in the browser of the IAM file though.
Inventor Suite 2013 Ultimate
in dwg's made from an assembly i someties see that the view does not include all parts. To add to the mystery, a projected view made from the base view that lacked the component(s) view can still include the part. The missing parts are not reference parts, and can sometimes be parts of a subassembly.
The attached pdf shows an example:
- view B and C show a horizontal ground plate not visible in the base view
- the projected view shows components visible in the area of detail D, which are not shown in the base view
- near section A-A there is a component missing of which a second item is shown on the left side of the base view.
Switching the hidden lines on shows the missing components, but these should not be hidden at all. No settings are altered for the views to include/exclude components. No parts are set to reference. And no design representations are used.
Whe i bin the views and start over again, the same thing happens to the same components. However, if i bin the whole DWG file and start over, the parts are present...
IV2009 / Vault2009 (including service packs etc)
Was working on a small project for college yesterday and now when i try to reopen the document a good chunk of the frame i constructed yesterday is missing.
The sketches are still there though the extrusions are missing.
I have an assembly file I made in Inventor 2011 that I published to DWF. When I view it in Design Review 2013 not all the parts are visible. If I zoom in on the area that they are suppose to be, they magically appear, but can't get a good view of the whole assembly that way. This trick doesn't work for all missing parts. I have tried to hide/unhide the missing parts, but that does nothing.
View 5 Replies View RelatedI have encountered this issue in a pdf file that I generated using my R (statisitcal language) scripts. The file contains 3 smoothed but wiggly lines where parts of a few lines vanish when I open the pdf file in illustrator. Opening the same pdf in any pdf viewers turns out perfectly however. I need to further edit the pdf file for publication purposes, so having parts of the plot missing makes this a headache. I've done other plots before with R, which can be edited in illustrator perfectly.
My file looks like this in pdf viewers:
In illustrator it looks like this: This is the case for both CS2 and CS6
There was a similar query previously, but the problem didn't seem to be solved. [URL] ....
I’m trying to import a .sws file from micro drainage into Civil3D and I’m getting the error on the attached image. When I select the drop down box for the part list I don’t have any options?
View 1 Replies View RelatedI have yet another query to ask. I have created an assembly with standards parts and objects mainly;
1. Valve with Actuator
2. Stud Bolts with Nut
3. Angle bar
4. Objects (Clamps)
I wanted to show an ISOMETRIC cross sectional view of the said assembly. I noticed after doing it so, that there were missing standard parts/objects.
How do I make them visible on the cross section ISOMETRIC view?
I am trying to generate a parts list that will contain a stock number from the BOM.
When I go to customize my parts list I cannot add a stock number as it's not on the list of properties available.
Is there any chance to add other properties? (i am aware that I can add a custom property but it won't be linked to my BOM.
As you can see, there is an entire face of the pipe missing. When I highlight over it (2nd picture) it thinks it is there. This has happened on lots of content center parts. There has been a few issues where this has happened with some of our downloaded user content (in our custom content center) even to the point of disappearing entirely.
This has happened across multiple (identical) machines. However, it doesn't seem to be reproducible on demand.
Pertinent info:
Inventor 2014 Pro, 64-Bit, Build 170, Update 1
Graphics - NVIDIA Quadro 2000 with latest current driver (Problem presented before driver update)
12GB RAM and Xeon Quad Core
We have a pipe part list that we have based of our own catolgue and it work fined in our template in 2012 and how we have upgraded to 2014 part of the list does not appear in the drop down selector see the screen capture attached? and figured out what caused it.
View 1 Replies View Relatedfonts withs parts of letter missing in a few fonts when sent to cut/plot
View 10 Replies View RelatedI am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View Relatedi'm experiencing some problems with the vieport in max 2012.sometimes when i restart max all my geometries in viewport are missing, while all are still there.
View 1 Replies View RelatedLR states that my photos are missing, but none of my photographs seem to be missing, ie, there are no question marks and all photos can be found, edited, and exported in the normal fashion.
View 2 Replies View RelatedI am trying to convert all missing PlotStyles that are missing to one that is not missing.
I am working with the Style Manager and Display Manger. We use a custom .stb and in this custome .stb we have eliminated some of the standard PlotStyle Names such as Full Saturation, well as you may imagine some of the default materials, walls etc... under Style manager reference Full Saturation, right now I am going in by hand, one by one, changing this to AsDrawn.
Is there a way I can automate this for two purposes?
1.) so I don't have to do this all by hand
2.) as we "copy" elements from older jobs we can macro the change of plotstyle and so when we get drawings from outside we again can macro the plotstyle to AsDrawn.
I recently scanned a poster but it was too big so I scanned twice to get the full of it. With PS7 I wonder if possible to re-join them as the original ?
I tried the "basic" way of copy and paste which is copying 2 parts into a new file but the outcome not look right.
We receive PDFs from our customers and sometimes when we open certain PDF files parts of the image disappear. why would this happen? we use PS CS2.
View 3 Replies View Relatedhow can I cut out just a single part of a whole image and not the entire image itself? For example, I have a picture of a girl and the only thing I want to use from the entire picture is her lips. How can I cut those out?
View 7 Replies View Related
