I am trying to generate a parts list that will contain a stock number from the BOM.
When I go to customize my parts list I cannot add a stock number as it's not on the list of properties available.
Is there any chance to add other properties? (i am aware that I can add a custom property but it won't be linked to my BOM.
I need to create a column in a partslist that reads IDENTIFYING NO. instead of the factory PART NUMBER title. When i create the new property in the column chooser dialog box how do i get inventor to pull the PART NUMBER from iprops over to the IDENTIFYING NO. column.
View 4 Replies View RelatedIs there anyway to add a driven dimension or reference dimension as a column chooser? What I am really trying to accomplish is to show the metric and english dimension in my general table for my ipart. I model itself is dimensioned in metric. I now would like to add the english dimension next to the metric one.
View 6 Replies View RelatedI have a parts list, with a column, that the description in the column heading is longer than the width of the column. I would prefer not making the column wider, so is there a way to increase the row height of the heading, and wrap the text?
View 9 Replies View RelatedI am trying to make a macro that adds the vendor column to the end of a parts list, sort by it first, then by part number, renumber the parts list, then save the overrides to the BOM. Everything works great except for saving the overrides to the BOM. The item number sort order gets jumbled back up. I am using Inventor 2008 Pro SP2. Below is the
Public Sub SortPartsList()
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oPartsList As PartsList
Set oPartsList = oDoc.ActiveSheet.PartsLists.Item(1)
Dim oPropsets As PropertySets
[Code]...
I'm trying to create an iLogic rule that will print a text string to a cell or column of a parts list in inventor.My code so far...
Sub Main()
On Error Resume Next
Dim oDrawDoc As DrawingDocument
oDrawDoc = ThisApplication.ActiveDocument
[code]...
I want to print what is in the MessageBox into a cell in the parts list, and i am stumped.The cell i am trying to print to is a custom property in the Parts List.
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
Is it possible to change a Parts Only parts list on a drawing into a Structured parts list? When a new parts list is created and you select the view it automatically chooses parts and greys out, preventing you from actually changing it manually. Is it possible to get around this without having to start a new drawing?
Inventor 2011
I have copied a standard "L" to my custom library. Now I would like to map the properties for the CC parts to be like my other parts that are not created in CC. One of the things I need is the "Title" and "Description" iproperty fields need to be the sectional size, i.e. L3x2x3/16, L4x4x3/8....etc.
To do this, I went into the editor and created a column. I mapped this column to Project.Description (see image)
why this does not work? When I create a new part and look at the BOM, I only see "Angled Steel" in the description iproperty field (see image below)
I did the same thing with the "Title" field and the "Project" field. Those work great.... just can't make teh Description field happen.
This is with Inventor 2011.
I’m trying to import a .sws file from micro drainage into Civil3D and I’m getting the error on the attached image. When I select the drop down box for the part list I don’t have any options?
View 1 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
When editing the properties for the title block on each sheet of my drawing, I've become rather annoyed with the default column width of the Value column. It always opens to the same width no matter how many times I change it. Every time I edit something in the title block, I have to resize this column to see everything I'm editing.
Any way to change the default width it opens at?
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
We have a pipe part list that we have based of our own catolgue and it work fined in our template in 2012 and how we have upgraded to 2014 part of the list does not appear in the drop down selector see the screen capture attached? and figured out what caused it.
View 1 Replies View RelatedIs there a command in Inventor to add values in a column in the Part list ( BOM) and to display a total value bottom like the Grand Total in Revit?
View 2 Replies View RelatedI am trying setup a default part list for my company in Inventor, where I am stuck at is I wish to lock the width of the columns so on all our drawings the part list is the same width, I have assigned each column its own width and when I bring it in to the drawing it's the correct size but I am able to drag the edges, and change its size, I want to lock it so if you try you cant
am I missing something obvious in the menus? Or is this a limitation with inventor.
I am using the latest version of Inventor 2013
I found the following code on Curtis Waguespack site. [URL] ........
View 3 Replies View RelatedI am trying to give an Expression like sqrt({Jx}/{Section}) in column properties in family table editor. but its not working.
Find the attached image .....
Inventor Professional Suite 2010
Windows 7
It seems like most people output the whole BOM. I only want to data in the Part Number column, preferably as a list of strings.
Here's what I have so far:
foreach (Sheet oSheet2 in aDoc.Sheets){ for (int i = 1; i < (oSheet2.PartsLists.Count+1); i++) { var oPartsList = oSheet2.PartsLists[i]; for(int k = 1; k < oPartsList.PartsListColumns.Count+1; k++) { if (oPartsList.PartsListColumns[k].Title.Equals("PART NUMBER")) { //what goes here??? } } }}
I've been using the "Phantom" BOM Structure to roll up duplicate .ipt's when I have more than one sub-assembly within a higher .iam and it has worked well.
Question - is it possible to adjust settings so that the .iam that I "Phantom" itself remains as a visable line item in the Parts List while still rolling up like .ipt's?
I have a drawing and I need to get a list of parts. I see *most* solutions use the parts list on the sheet itself. I will not have access to that. Is there a way to get a list of parts WITHOUT accessing oSheet.PartsList[1] ?
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I initially entered a few overrides for mass on some parts that I have included in a large assembly. However I now want the calculated values of mass to be used and not the overridden values. I go to the part file, erase my value, and click update and it now shows the calculated mass for that part. However in the assembly it still shows the initial overridden value even though I have tried updating it. How do I use the calculated mass values in my assembly?
View 1 Replies View RelatedWhen I make a drawing, often times page 1 will be the entire assembly and in subsequent pages (sheets), I will dimension each individual component, etc. In the "Name" field in my title block, I have it grabbing the "Title" and "Subject" iProperties. Just so happens, those fields are ALWAYS the same for each part as it is for the assembly.
What is the best way I can either
A) AUTOMATICALLY copy the "Title" and "Subject" iProperty fields from the assembly to EACH part that makes it up
or even BETTER
B) AUTOMATICALLY copy the "Title" and "Subject" information from sheet 1 to the same place on all subsequent sheets
Or BEST
C) Have the title block template pull that data from the assembly, EVEN IF only a singloe part is on the sheet.
I have a problem here. I've created a tube & pipe assembly. Now, I want to know whether I can automatically generate "Location to" and "Location From" of my tube assembly. For example, tube A origin from part A goes to part B. So I want to automatically generate those. Is there is a way or do I need to type in manually.
View 1 Replies View RelatedAs an academic interest I was trying to convert Brian’s code for exporting Parts list with thumbnail to VB.net 2012. I just modified the below code to remove the vb6 support. I am using VS 2012 and Inventor 2014. The end result on the word report thumb nail for some parts are not visible. It goes to the error code and putting the text instead of thumb nail. At the same time Brian’s code as it is (used the exe file to install it) works fine on the same parts list with all thumb nail.
#Region "PictureToImageConverter"
Public NotInheritable Class PictureToImageConverter
Inherits System.Windows.Forms.AxHost
Private Sub New() MyBase.New(Nothing)
[Code] ......
We would like to put barcodes in a parts list. To create a barcode we use a special barcode font.
It's impossible to have two types of fonts within one parts list, but is there an other way? Is there code (VBA) to generate a table with an extract of the bill of materials and a barcode generated
with a special font on the fly. We would basically need a parts list with an extra column for the barcode.
Autodesk Inventor Product Design Suite 2013 SP1.1
