in dwg's made from an assembly i someties see that the view does not include all parts. To add to the mystery, a projected view made from the base view that lacked the component(s) view can still include the part. The missing parts are not reference parts, and can sometimes be parts of a subassembly.
The attached pdf shows an example:
- view B and C show a horizontal ground plate not visible in the base view
- the projected view shows components visible in the area of detail D, which are not shown in the base view
- near section A-A there is a component missing of which a second item is shown on the left side of the base view.
Switching the hidden lines on shows the missing components, but these should not be hidden at all. No settings are altered for the views to include/exclude components. No parts are set to reference. And no design representations are used.
Whe i bin the views and start over again, the same thing happens to the same components. However, if i bin the whole DWG file and start over, the parts are present...
I was making some pieces in Inventor 2013, and a lot of them had similar bases, so I would just use the derive button when I started a new piece, and just make changes to the old piece. I later saved the files as .stl 's to print them in the 3D printer. when the computer hooked up to the 3D printer brought up the pieces, the parts I had derived from the original were missing.
A couple parts that I moved from one subasy to another in an IAM are not showing in the associated IPN browser at all. Yet they are visible in the edit window & look as if they have tweaks applied. I can click on & highlight them but there is no sign of them in the browser at all.
The parts are definitely in the browser of the IAM file though.
Was working on a small project for college yesterday and now when i try to reopen the document a good chunk of the frame i constructed yesterday is missing.
The sketches are still there though the extrusions are missing.
I have an assembly file I made in Inventor 2011 that I published to DWF. When I view it in Design Review 2013 not all the parts are visible. If I zoom in on the area that they are suppose to be, they magically appear, but can't get a good view of the whole assembly that way. This trick doesn't work for all missing parts. I have tried to hide/unhide the missing parts, but that does nothing.
How to manage the visibity of parts on a particular view? For example, in a view there 10 parts appeared. I would like to make only selected parts visible on the said view.
I have the manual steps on how to hide them but when I try to code it using the said step, the parts on the model file were hidden not in the view.
I use oView.ReferenceDocumentDescriptor.ReferenceDocument in traversing the parts but this refers to the model file.
Here is my
Set ViewDocument = oView.ReferencedDocumentDescriptor.ReferencedDocument For Each ViewOccurence In ViewDocument.ComponentDefinition.Occurrences If Not nozzleName = ViewOccurence.ReferencedDocumentDescriptor.DisplayName Then ViewOccurence.Visible = False End If Next
I know this wasn't possible in the past (and probably still isn't now) but does any trick or something to only get the qty/parts used in a certain design view rep.
We are starting to do work orders (routings) with parts lists for ONLY whats used in that step in the process. Having to manually count screws,etc.. seems silly now.
Design view reps works excellent for showing the assembly process of a product but the parts list (even filtered to that design view rep) shows the total quantity of each component..not just the count in that design view rep.
Any possibility of doing this with ilogic or something?
2014 Product Design Suite Ultimate Windows 7 64 bit 90G OCZ SATA 3 SSD (My SSD is faster than your HDD) Core I7 920 processor, ATI HD6970 graphics card, 12G Corsair RAM
As you can see, there is an entire face of the pipe missing. When I highlight over it (2nd picture) it thinks it is there. This has happened on lots of content center parts. There has been a few issues where this has happened with some of our downloaded user content (in our custom content center) even to the point of disappearing entirely.
This has happened across multiple (identical) machines. However, it doesn't seem to be reproducible on demand.
Pertinent info:
Inventor 2014 Pro, 64-Bit, Build 170, Update 1
Graphics - NVIDIA Quadro 2000 with latest current driver (Problem presented before driver update)
I have a model of an enclosure created using Frame Generator. I create a View Representation of each wall and the roof in order to create the fab drawings. Is there a way to create a Parts List ONLY what is visible in a particular View Representation?
I have an assembly that uses reference parts. I do not want them in the BOM, but they are used in other drawings in the BOM. When I make them reference, the iso drawing view boundaries are not correct. Can I change the size? Crop will only decrease the size not increase?
I often do section views in my 3D model (not drawing) to visually check interference, etc. I noticed today that some parts are excluded from this and do not get sectioned. I'm sure it's an easy fix but a search turned up nothing. How do I include/exclude specific parts from this view?
I need Recursively go to all bomrows and child rows if present in the Bomview Model Data ("Unnamed")
I have the below code but i only goes one level deep.
I tried the code from the inventor that does the trick on a structured bomview but i will fail if you have a virtual componenent that has the same partnumber as a part inserted in the assembly. then it finds the first insertet and errors on the next?
i have to recursively go to the "Unnamed" bomview here the below code does not fail and works, but as written only one level deep, i need all levels?
Public Sub UpdateThisFileBOMRowProperties14062013() 'ByVal oBOMRows As BOMRowsEnumerator) ', ByVal ItemTab As Long) oApp = GetObject(, "Inventor.Application") oAsmdoc = oApp.ActiveDocument ' Set a reference to the BOM Dim oBOM As BOM oBOM = oAsmdoc.ComponentDefinition.BOM
I am not sure why, but i can't hide few parts in my drawing. I have hidden few parts and saved the view rep. I have called that particular view rep and still I am seeing it the drawing. I am unable to hide it. This is a multi body solid part file. I use INV2012. Win 7
I have a section view of an assembly. The parts of the assembly that are completely remove via the section no longer show up in the browser. Is there a way to make them show back up in the browser and/or section view? They are internal to the assembly and I would like them not sectioned/removed from the view.
In some drawings, parts and trail lines will randomly disappear or get rearranged. Once the parts disappear, the only way we're able to get them back is by copy and paste the explosion into the presentation file and regenerate the view.what happened to the .idw file and how it should look.
We've tried replacing the video card and repairing the Inventor installation, but still experience the same issue on some drawings.Running Inventor 2008 on Windows XP.
I have a parametric assembly and some of the parts in this assembly require a "Break". When the part dramatically reduces in size the part view disappears as the part is now located in the "Break". Delete the "Break", re apply the "Break".
I would like to be able to constrain a Break to the part, either a sketch on the view or maybe from Workplanes in the part.
I'm creating a small product configurator using ilogic. It all works fine, but i've i challenge:controlling the visibility of the components in a drawing view
In simple words, every occurrence of my assembly has an custom Ipropertie calles "Positie". there where 4 values (Bodem, Zij, Kop, Deksel and Overig)In a drawing view i only want to see the parts that has a specific value of the ipropertie "Positie".I found a sample code for VBA, but I cann't get it worked in ilogic.:
Sub HideSecond() 'Assumes you have an open drawing 'Assumes that view 1 of the active sheet is an assembly 'Turns off visibility of assembly's second component in open drawing's first view [code]....
hind to turn this into ilogic and add the option to check the ipropertie to turn on the visibility
Is it possible to define a View Representation in an assembly such that a half section view is active, but only for a certain set of parts within the assembly?
issues with parts lists generated from View representations?
This is weird but my parts list generated from View representation seem to be not accurate, when I take two assemblies that I need to create BOM for, and drop them into a new assembly, then create parts lists, its different from BOM generated from representation view that has too high numbers.
When I make a half section view in an assembly the frame generator members do not section, they remain full length. Is this normal or something with my setup?
Is there a way to have the parts list filter to show only the visible parts from the view representation, especially the quantities? I thought that was what the filter is for. And if not then what is the filter used for?
I'm trying to make a drawing of a assembly, and some of the parts were made in frame generator. When I try to make a section view the parts made in frame generator still show as whole instead of halved. Is there something that I need to toggle or vice versa so that this will not happen anymore?
I want to place a "Parts Only" BOM view of my Parts List. In the Parts List dialoge box, when view or document is selected, BOM View grays out and defaults to "Structured". This issue is new to my work station and is not an issue to the other stations. Why? How can I fix?
Background: Our company has decided to switch from drafting in AutoCAD to Inventor (which we already use to model) and we have started looking at making our templates intuitive using iProperties, parameters, and functions to reduce manual entry of part information in turn to reduce human error. None of us have any experience coding besides a bit of LISP.
Problem: Perhaps it is a pipe dream, but one thing I would really like resolved is we have no connection between the Parts list information (specifically item number and quantity) on the assembly sheet and the part detail on another sheet. Our custom part detail title block pulls the material information and "Inventory Part Number" from custom iProperties we have set up at the part level, but we still need to reference the parts list in the other sheet and then manually enter the item number and quantity. Is there a way to use the "Inventory Part Number" property (which shows up in the parts list on a different sheet) to populate our custom block?
Is there a way of using Ilogic to make hidden lines of specific parts in an assembly drawing view visible? If a part with hidden lines showing is suppressed and then unsuppressed the hidden line option becomes unchecked, therefore I need a way of rechecking this option through code?
Is there an option in drawing mode to exclude certain parts from a section view.
According to ASME Y14.3 parts such as shafts, keys bolts and nuts should be excluded in sectional view. Its not just removing the Hatching, the part has to show completely.
The closest I found in Inventor is that you can exclude Standard parts from being sectioned. Some of my parts are not in the standard library.
I would like to have the option to choose which parts I want to section and which ones I don't.
