Photoshop CC cannot produce 2 equal batch results ! its skips images at random and even worse skips parts of the batch commands! This makes PSD CC absolute useless in a professional environment, and that Adobe have not fixed this huge bug in the last 5 updates they have done in less than a month is an outrage.
View 19 RepliesWin7 Enterprise 64 bit
Illustrator CC 17.0.1 64 bit
After placing an image into a new document within Illustrator. I trace the image and expand it. from there I attempt to Alt-click on the unite shape mode to create a compound shape.
No results...the compound shape is not created.
I am relatively new to dynamic block. I have generated a dynamic block that has four hole. I have HDistance and YDistance linear parameters set with mid point as their base location and action assigned so that they spread apart equally in horizontal and vertical direction and it works fine.
I am now adding another linear parameter (to change hole diameter) by trying to assign scale action, to increase or decrease hole diameter of all four holes simultaneously.
I have run the DWG Compare Plug-in on two DWG files. The results show the plan in grey while the differences in plans are showin in color. If I plot an individual layout to PDF the plot looks perfect meaning the plan is grey and the differences are color.
When I batch plot, all of the layouts lose their ability to plot the results of the DWG Compare and just print like the original DWG file whether it be mono or color. is there an entirely different way to go about batch printing to a combined PDF the results of a DWG Compare?
I need to create a 100 wedges 'spinning wheel' graphic (like a pie chart but does not require pie chart functionality) with each wedge of equal size and spacing but can't seem to find a process that works.
View 4 Replies View RelatedSo I have an action that I've been using for the past couple years (?) now that involves opening an image, applying an auto color and auto levels, saving and closing. This has been working for me since probably a couple years ago when I made the action. Yesterday, I was working on a scanning project where I have groups of images in separate folders. I ran the action on the first 2 folders which went fine.
When I got to the 3rd folder all the way up to the last one, PS just loads all the images, does the levels and color then fails to save/close them when done. On one of my folders, it gets through a few of them when it drops the ball and just opens all of them. I'm not sure what's going on as there's no real explanation as to why this is happening.. especially when I've been using this action (and I even made a new action with still no luck). Last week I had about 300 images I had to work with and PS decided to pull this move on me after doing the first 30 of them fine...which is when I first noticed this happening.
To further add, I set my action to show everything step by step and it seems to happen with select images (in some cases, these select images are entirely what is in the folder). With the select images, it is not doing the actions entirely in order. Typically it does it in this manner:
1-Levels
2-Levels
3-Save
4-Close
What I'm now experiencing is this:
2-Levels
1-Levels
(Skips 3 and 4 since it is starting at 2 and working upward).
What is the best way to mix five different colors in equal portions and see what the resulting color is, as if I was putting 5 drips of each color into a container and stirring well.
I have tried the smudge tool and placed the five colors abutting each other, but there has to be a better way.
I want to produce three positive transparency (C M Y) "films" that I can lay on top of each other over a white light for demonstration purposes (to simulate the behaviour of a slide film). Obviously each film has to be printed in its own colour (Y, M, C).
View 4 Replies View RelatedI realize that you can align objects in Photoshop, and that there are options to distribute horizontal and vertical centers, but how would I put an equal amount of space between objects like with the "Distribute Spacing" option in the illustrator align panel?
View 5 Replies View RelatedWe are currently working on an architecutre project for which we have to make printed curtains/screens. The maximum of one Curtain is about 180 meters (600ft). Over the 180 meters we have a pattern, which makes it not so easy to split files into pieces (color gradients, a.m.m.)
Our printing company suggested us to produce everything in a 1:10 scale (1 meter is 10 centimeters) and in 600dpi and they will scale it up with their rip unit and print it than in 1:1. Final print resolution is therefore 60dpi.
As a start we are doing a 25 meters x 2,5 meters file - which is already super hard on the computer. (all new macs with 16gb ram and adobe creative cloud)
Is there any way of working like with videos - online and offline files? So that we work on a smaller scale and then repeat all the steps on the larger images.
We want to get our workflow optimized as we have to produce 3000 meters of image.
I want to upload on my web site students and college colour portrait photos (in contacts sheets) but they have different skin colour ( most has yellow cast but some don't).
Is it possible to make some action (to take initial colour of some proper skin colour of the portrait) and apply to all pictures. Maybe some plugin is available.
I have a panorama jpg image
width: 2400 pixels
height: 1600 pixels
Is there a way I can automatically create 4 cropped images,
each with size 600x400 or I have to do it manually?
how can i divide circle in to 48 or 24 equal parts in photoshop cs without getting jagged edges, i m desperately need this divided circle,
View 1 Replies View RelatedI want to produce three positive transparency (C M Y) "films" that I can lay on top of each other over a white light for demonstration purposes (to simulate the behaviour of a slide film). Obviously each film has to be printed in its own colour (Y, M, C).
View 1 Replies View RelatedI am trying to start a line of nutritional supplements and need some advice on producing the labels. I have already used photoshop to produce a 1486 px wide by 600 pixels height that will be a 1.5"x3.5" label. I need to do this as inexpensively as possible and it is going on a plastic bottle. It should look like the glossy labels vitamin bottles have not regular white address labels. I will also be doing this for a 2X4 label.
My thoughts were to order a glossy type label that I can laser the logos onto at office depot or something. Anyone have any specific details with product info for me?
Can I produce clipping paths using Photoshop Elements 12
View 1 Replies View RelatedI am running PS CS5.5 on a a MAC running OSX 10.7.3 and printing to an Epson Stylus Photo 2200.
Background:
Basically, the dimensions of a printed graphic are different than the size that is specified in the PS version of the graphic. The amount of error is about 1/16 of an inch over a 6 inch distance. This matters as the printed output must fit a template exactly.
Details:
I create a 300 dpi resolution document. I am using inches as the ruler setting and the method for specifying the size of an object in the Free Transform Dialog. I create, with the rectangle tool, a rectangle and then use command-T to specify the dimensions to be 6 inches X 1 inch. I check using the ruler tool and verify that the shape is 6 X 1. When I print, the object is smaller. In fact, it will be 5 29/32 inches instead of 6 inches.
If I create the same object using Illustrator, the object prints (same printer) exactly the specified dimension. If I place the illustrator object into Photoshop it will "say" that it is 6 inches but prints at the reduced size.
After pulling my hair out, I have just adopted the work-a-round of scaling the output, in the printer dialog, by an appropriate % to compensate. There must be a better way to address this problem.
I am using cs6 on a macbook pro with retina (dunno if that matters).
i noticed a while ago that the sizes of my documents in photoshop are smaller than normal. Im not sure if this is a resolution issue, but in illustrator, indesign, after effects everything looks normal sized. I am trying to create a thumbnail in ps that is 310x225px. When I place the psd in illustrator it becomes 74.4x54px. Creating a new document in ps with both resolitions 72 and 300 result in the same size artboard. I'm not sure if this is something simple I am overlooking, but I don't want to have pixelated thumbnails in my mockup. There must be something I can change to make photoshop create normally sized images.
When I try to add a layer mask either by clicking the icon in layers panel or going layer>add mask I am not getting a usable mask. The layer mask icon in the layers panel is added to the image, but it is still the rectangle with a white circle in it, not an icon with an all white or all black background. Clicking on this icon does not produce a mask to paint, whether white or black. why I am not getting the typical pixel layer mask that can be used to paint and reveal the image beneath?
View 2 Replies View Relatedsimple way to do this with Photoshop (I have CS)? I need the nine separate jpeg images for the flash version, I understand this example is just one jpeg and is used in the standard html version of a template I have....
Curious is there is way that is automated to do this. I can rotate each section (image) as needed for the spot, but want to take a picture and cut it into equal squares.
I have been using Photoshop Elements 4 on Windows XP. One of the regular uses was Photomerge where I would put 2 photos on photomerge, ona above the other for comparison purposes on Facebook and other forums.
Now I have Windows 7 and have had to buy Photoshop Elements 9. With this program there are several choices for photomerge but none do what I want.
How can I produce a single file of 2 photos, one above the other for comparison purposes?
how I can clone an image to produce multiple images within the same document?
View 14 Replies View RelatedCan anyone advise how I can draw (from scratch) a 6 sided shape.
I cant post an image on here (as I'm a newbie to this forum its going to be hard to explain without an image)
Superman Logo
and then rather than a point at the bottom imagine a flat extra line (so it then has 6 sides rather than 5)
I can make a 6 sided shape no problem, but it always has equal length sides when I first produce it,
So I goto
Transform>skew
(as I would image I could change its shape with) it just never looks right.
I take it I either want to drag the corners in and out or to perhaps input the details of size/length/angles etc (but I imagine this will take too long).
It is even possible to make this image in 1 go?
How to produce a soft edge frame around all 4 sides of the photograph where the image gradually fades to white at the outer edge? Example attached.
View 1 Replies View RelatedWhy does my printer produce mirror image photos. I am using Mac10.8.4 plus canon pro 9500mk11
View 1 Replies View RelatedI am creating colage images in Photoshop CS4. I sometimes use scanned vintage daguerreotypes or other small snapshots. They are often small sized at 3.5" x 4.5" or 4.25" x 5.5". My Epson 835 scanner can scan in at 300, 400, up to 800 dpi. If I intend to print these scans at 8x10, 11x14 or a larger size within the overall collage, should I scan in at the highest dpi allowed by my scanner? Does this make a real difference after 300 in resolution/clarity?
Also, Does Photoshop CS4, in the enlarging process, as I bring the smaller image into my composite and stretch size it up with (T) tool, end up just making "junk pixels" using "Bicubic" or "Bicubic smoother" in the printing from flattened PS file, even tho I scanned in at a high dpi? scan in at best dpi so that the image won't be pixelated, lose resolution as it is used larger inside the final composite collage.
Can I produce an editable PDF in Corel Draw 15, like i can in Adobe Acrobat?
View 7 Replies View RelatedI’ve just produced a short video, intended for Youtube, but in the ‘Share – create video file’ step can find no options to produce an mp4 file in 16:9. My preferences were set to 16:9 right from the start and all the material is either originally 16:9 or cropped to 16:9, so it would be nice to produce the video as 16:9. I tried a few other file type options that I thought might be suitable for uploading but can’t find anything on offer that would produce a small file size in 16:9.
View 9 Replies View RelatedI'm geting really ugly "Merge to HDR" results in Photoshop CS6 that were not present in CS5.5. It only happens when using the "Remove Ghosts" checkbox
I use a Panasonic Lumix G2
Photoshop CS6
Lightrom 4
Camera Raw 7
I'm trying to merge RAW images to HDR. I use Adobe Lightroom 4.
1) I right click on multiple RAW exposure images
2) Edit In > Merge to HDR Pro in Photoshop
3) After aligning and merging, I use the "remove ghosts"option, but it creates really ugly blown-out areas on my preview image. The result is just as bad after clicking "OK" and the "creating file" box is done. I can see another thread discussing this in the Photoshop CS6 Beta (read only) area. The guy was using a Panasonic Lumix GH2,(mine's a G2) so maybe it's an isue with RAW support for Panasonic's Raw format.
[URL]....
Im having this exact issue also.
How to equalize the nodes distance between the curve to apply the brush after making them break apart since here as per the curve size and direction nodes are distributed unequally. how to make them equally aligned.
View 1 Replies View RelatedI have a project with lots of holes to cut on CNC cutter, but I have to change the spacing between the holes (from 23mm to 18mm)
In the *.cdr file, the holes are seperate objects/circles with a precise angle between each of the holes and I do not want to change that angle.
Is there a function, that I for example select two holes, write the distance between them and it makes it?