Although i bought CS^ Middle East Edition it doesnt write arabic correctly letters are not connected, even if i change fonts i had a friend sent me an arabic words and when i opened his file it open correctly in my photoshop and i can edit it, also when i copy his text on my file its correct while mine at same file doesnt show correctly where letters are separated how can i correct this ?
View 7 RepliesI am working on this, and I typed this arabic word in photoshop, normally with other fonts i have no problem typing, I don't normally have this problem with any other fonts, but with this one, everytime I try and type,
The one on top is normal, the one on bottom I tried messing with the horizontal spacing but it just shows a white space where they are supposed to connect. Any help would he really appreciated. Also, This is the first time this happened with me, so I don't think I need the ME version because I do this all the time, just with different fonts,
I have Photoshop Middle Eastern Version CS5. When I type Arabic the letters are typed backward.
As you know arabic is typed from right to left, but in photoshop they are typed from left to right.
Everything is fine when typing on another program like notepad or MS word, but in photoshop letters are reversed,
Windows -> Character: I chose Adobe Arabic
Windows -> Paragraph is set to right align text and justification is set to arabic, eventhough arabic letter are typed backward and are not connected.
I have windows 7
im using corel x6 on win7 x64 i have some critcal issue on some arabic fonts spacially word ALLAH (الله) when im writing Word ALLAH in Arabic its disapears.
View 1 Replies View RelatedIn creative cloud i selected English (Arabic enabled) as a preference. I reinstalled Photoshop because I had already installed Photoshop with English as a preference. I still can't type joining Arabic letters. How to type joint Arabic letters in adobe Photoshop / illustrator?
View 1 Replies View RelatedHow to make arabic letters connected to each otherin illustrator by using mac?
View 9 Replies View RelatedI can not use Arabic fonts letters appear irregularly
View 1 Replies View RelatedI have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies View RelatedHave an animated fire/smoke effect. But I need to have each frame as individual images. I'm inputting it into a game that compiles the images together into an animation in-game.
I have found lots of smoke and flame tutorials, but have not found any on how to make all the frames I would need for a smooth looping effect. If possible, I believe there are small little programs which can create animated fire/smoke for you, and then break it down by frame. But I have no clue what programs can do this. My main concern is to make sure the flames/smoke are as clean as possible in order to be able to make an alpha channel to provide me with transparencies around the effect.
So if anyone knows of a tutorial showing me how to create smoke divided by different frames (20+ or more so it is nice and smooth), please let me know. Of course, if you are willing to provide a quickie tutorial, then even better.
Or if someone has a name of a small program I can use that will create fire/smoke for me, then separate it by frame and save them,
This is a cropped corner of an illustration I removed from its opaque background and placed on a transparent background. The north and west borders show the whilte line that forms whenever I place objects on a transparent background. The south and east borders are the cropped edges -- they are clean and make the trasition from object to background color without that white line. With some objects, it's possible to use the Plygonal Lasso Tool, for instance, and trim that object away from the background. With portraits or irregularly shaped objects, though, it's necessary to use the Magic Wand or other means to trim the background away from the object, which results in that unwanted white line. Defringing, Removing White Matte, Anti-aliasing, trying to predict what color you'll lay the silhouette on and working in that color, and on and on. It seems as though Photoshop would be relied upon heavily by professionals who need to place objects on top of one another without intrusion.
View 3 Replies View RelatedIn PSE11 I saved a DNG and embeded a full size JPEG. Is there anyway to separate the JPEG? I really don't want to have to create another JPEG.
View 4 Replies View Relatedi flimed with separated audio and now on my premiere i have the sound of the camera and another four separated audio channels, my question is that there is any way that i can put together the audio with the picture forever, not only on the timeline? also i wanted to know if i can reduce my four audio to two?
View 1 Replies View RelatedThe oject below has an unwanted small yellow shape on its edge.
Not sure why it is there as an identicle object within the same project doesn't have it!
How can I connect them again so they are one?
Whilst I am doing this is it also possible to connect the other yellow areas in this image so I can recolor them all together whilst testing colors?
I tried using the: Shift+Select all object>Ctrl Click>Group (& tried "Join" also) but doesnt seem to connect them!
How do I make a separated PDf from an Ai file?
View 4 Replies View RelatedI have a synced three camera project that I have almost finished editing. I want to select the last video clip in my sequence and roll it back, while keeping the audio in place. The idea is to fade the picture to black while the synced audio continues as credits roll over black. However, I cannot find a way to select video only on the clips at the beginning and end of the sequence. I can select and separate any video clip in the middle of the sequence, but not the clips at the ends. I must be missing some keystroke. How do I do it?
I am noe to Premiere Pro and am using version CC.
This week I have been rebuilding some of my custom menus in CDX6, but I could not find the Separator to add to my menu/toolbar. It was not listed under the Commands>User Menus where it should be...well at least I thought it was not there. If I mouse over the list I can see the text pop up intermittently.
I also checked via the All (Show All Items) command list. The space is there but the text for it is wonky. I caught a couple of screen shots to show you what I mean...
When inserting doors and windows there was a feature called Offset/Center that allowed you to input a standard offset or the item would be inserted at the center point. Also, there were highlightable dimensions when inserting that you could modify on the fly.
I am currently using ACA 2012 and also have 2013 installed and neither of these versions have that feature. I have Offset as a separate selection and Center as a separate selection as well as Unconstrained, but not the combo feature. Is there a variable that controls this availability or something else that I can check to make this go back to the combo feature?
I've attached a jpg showing my properties box demonstrating the separate items but no combo.
I would like to have two fields in the iproperties and then concatenate them together. Lets say one is the the w.o. or project number and the other is the drawing number. I would like to have a third iproperty that concatenates them together seperated with a dash (EX. 200970-301).
View 2 Replies View RelatedIf a want one assembly with, lets say, 2 steelframe cases made with frame generator, and I want to have a piece of wood between them and I want to edit the position of the cases and the thickness of the wood. Then I need to do the frame generating in 2 separate assemblies and bring them together in a mother assembly?
View 2 Replies View RelatedAgain a new version and again the same issue like in all previous versions. One could think that issues solved in one version would not be present in the next one.
Again Corel made barcodes apear in all colours in separations, instead of the logical Black only.
I know I can export to pdf and then import again, change colour to black to solve it, but if you want to keep editability or have to do 100+ Barcodes, this is just annoying.
I separated to a part with the split tool now I want to reconnect the part together, how do I do that?
I tried offesseting the surfaces of each side of the part then combine them using the "stich tool", bu the spliting edge still remains between the solid.
I need to create a color separated layered tiff file from my Illustrator document. I saved it as a color separated .ps file in hopes that I could then convert that to a tiff. My problem is that when I save the .ps file it saves the color separations, but in grayscale. Is there a way to convert an Illustrator file to a color separated tiff?
View 3 Replies View Relatedwould be able to identify arabic fonts also.
theres this one font, i want to post it, but i wouldnt even know if u guys would know what it is. is there a website for foreign font identifying?
how to change text orientation from left to right to right to left in photoshop CS2 so i can type in arabic
someone said i need to buy photoshop middle eastern eddition. is that true?
I have inventor 2012 and I´m having trouble doing a cut boolean operation to two solids. One is a revolved elipse, so it´s a kind of egg, and the other one is an extruded rectangle.
I want to cut the egg in the rectangular solid, so I can obtain a rectangular solid with an empty egg space inside. I tried to use the "derived" command, so I derived the egg from the rectangular solid, and used the combine command, but with no success. Right now I have two separated solids on the same file (the egg and the extruded rectangle).
For example from 1 to 100 or more like this 1 2 3 4 5 ..... 101 102 103 and so on.
I need this to end up in Illustrator but I also have the office programs Word, Excel, Access but I'm not advanced user there.
During the Beta versions of Photoshop, I have moticed there was an extra support for typing, which was arabic or midlle eastern typing from the language options
but I see in the finall releas.. this option has been unebabled..
so now I cannot type in arabic ?!
for some reason my Photoshop CS is not allowing me to select 'english' in the resolution field when I create a new document in Photoshop. Any ideas why? Another installation here at my office shows English as an option - on my machine and another machine it's not there at all. This of course is concerning because if we select other language options the numbers get concerning and we are not confident that using 'Arabic' will provide us the correct resolution settings.
View 2 Replies View RelatedI need to know how I can make adobe photo shop CS3 support Arabic
View 13 Replies View RelatedI had install the new software of Adobe Photoshop CS6 and it is not supporting the Arabic Language.
for example ; it is writing أ ح م د not أحمد like that !
How to apply photoshop styles to an arabic text?
View 4 Replies View Related