I need to make an transparent GIF of a sold banner that will go over object. Thing is when i save it as a GIF the edges are discolored to a whiteish light green. I've tried all different kinds of GIF settings but i get the same thing. It needs to be transparent..
View 9 RepliesI'm trying to take a photo and make the border of the picture appear to be torn all the way around. Like if you were to tear something out of the newspaper. Is there a filter or action that anyone knows of that will achieve this effect?
View 2 Replies View RelatedHey guys. I've just recently started working with Lightroom and I thought everything was going okay, until I loaded my finished photos into a website.
The photos are coming out completely faded... I can't figure out what is causing this but its beyond frustrating! Here is an example: ....
I recently reinstalled windows 7, and since then I've been having two problems with photoshop cs6.The first one is that whenever I make an action in the program like zooming, using the hand tool, making strokes with the brush, I get these black dots appearing and disappearing on the screen.They are like black pixels and appear at random locations.I actually had the same problem a couple of months ago and got the advice to install the 12.8 catalyst drivers for my ATI SAPPHIRE 7870, as they are the most stable.That fixed it and I haven't had the problem until now when I reinstalled my windows and it started happening again.The only difference is that installing the 12.8 drivers doesn't fix it anymore.I tried many driver versions 13.4, 13.5 beta, 12.10 and the problem stays.I know it's a GPU problem, because when I desable the GPU in Performance, it fixes it.The only solution that I have found for this problem is to put the drawing mode on Basic in Performance and that fixes it.So this is not the main issue at the moment, since as far as I know, I can just stay in Basic mode and it won't affect my digital drawing.
The second problem that I have is that, there is a ton of screen tearing when I move my image around, like using the hand tool and the rotate view tool especially.It's like not having Vsync turned on or something, but as there is no option like that in PS CS6, I can't control that.I tried turning off and on the different option in Performance and nothing fixes it.It's interesting that even when I turn off GPU ussage, the problem still stays, so maybe it's not a video card/driver problem.So bottom line: black dots- fixed it with switching to Basic drawing mode, would like to know if there are other ways to fix it; screen tearing when moving the canvas/ image.
My PC specs are Core i3-3220 CPU 3.30 GHz, 8GB RAM Kingston HyperX, Sapphire Radeon 7870 HD 2GB GHz Edition, Motherboard - ASUS P8H77-V and I'm running on Windows 7 64-bit.
I've recently been doing a lot of terrain texturing work in Photoshop7 for aerial sim modding, producing tessellated 512 x 768 bitmaps from 512 x 512 psd files. I have noticed that most of the down-sized (128 x 128, 64 x 64 and 32 x 32 pixel) bitmap sections appear with a light-colored strip (one or two pixels wide) along one or more edges.
I've tried everything I know to eliminate this problem without success. The images can be retouched manually, but with a grid of 58 x 37 terrain tiles to process, this isn't a practical solution.....!
When I save a file as a .jpg to use for a website, I notice that it doesn't match the same color as my background. I've tried a few settings with photoshop, but they didn't seem to fix it. (I know I didn't pick a wrong color, I used the same hex code as my page background, but it is a non websafe color.)
View 1 Replies View RelatedDoes anyone know how to clean dirt from a photo without losing the texture or the original integrity of the pic? The photo attached has a layer of brownish dirt discolration evident around the collar and clothing. I imagine this would take hours to correct using the stamp tool. I'm sure there's a way to combine layers or something to clean this up without over-softening the photo.
View 1 Replies View RelatedHow do I remove all the red discoloration from my photo and there is quite a lot? I am using adobe Photoshop elements 11.
View 1 Replies View RelatedI have a problem with "new scroll feature" in Photoshop CS6 - I didn't find any discussion about that in whole internet (maybe I used bad keywords for the finding) How can I turn off this annoying horizontal scroll feature?
I over and over again do the same - by mistake scrolling horizontally instead vertically..
I have so far made a vector shape with the shapes available and am trying to use the pen too to manipulated it. BUT for some reason when I try and drag a point I just get the curve handles but the point won't move, does anyone know what I could have accidently pressed to stop it behaving?
View 2 Replies View RelatedI'm just guns blazing in Photoshop CS6 and enjoying every feature of it, but I have this on issue that I think Adobe has overlooked.
In previous Photoshop when you create a shape and open the "Blending Options" window your shape would look like this (if you have the "shape" deselected in the layers palette.
Example 1.
But now in Photoshop CS6 I don't have the option to do so, I'm stuck with this shape bounding border, and it's a real pain when doing website mockups or other things for that matter.
Example 2.:
Example 3.:
As you can see above if I wanted to add a 1 pixel inner shadow to work as a highlight, I can't see a proper preview of it. Unless I hit ok and deselect the shape.
Is there a way to disable the ever so annoying hand toss feature (that makes the canvas glide as you pan it)? Actually refering to it as a feature kind of makes me cringe as there's no practical benefit of it what so ever.
I also find the movement of the new GPU-accelerated marquee zoom kind of jerky. Instead of moving straight in, it seems to use some kind of compound movement that feels rather unsmooth. Am I the only one annoyed by this behaviour?
how to get this problem resolved. everytime i use my type, when i click on my work area, a black dot appears on page before i begin to type. then no matter what font i use, there is a black line under all my type. how can i get just the black dot from appearing at first when i click, and that annoying line under all my type to dissappear! i'm veryy new to photoshop, and i have cs.
View 2 Replies View RelatedGot some visual issues on the model space window in perspective view of the Objects/Models somehow gets tearing effects/ parts get invisible or gone missing, when playing around with it, whilst zooming, rotating, paning, moving while inside the perspective view window, this is not evident before in older 3ds max version we have used which is 2009, the model/object is correctly done, no open poly or anything with it or whatsoever....its just the viewing when you try to play around with the model that you see the tearing ups, this is quite frustrating coz you might think that the model is empty or missing its face or sides, or another part have gone thru the object....etc etc.
> 3.06ghz Intel Quad-Core i7-950
> Asus P6X58D
> 12GB DDR3 (2gbx6)
> Leadtek Quadro FX4000 2GB
> Seagate 1TB sata
> Windows 7 x64
> 3ds Max Design 2013
I have bad screen tearing in gimp 2.8 in windows 7 x64, making it almost unusable! (see youtube link: [URL] look around 15 seconds into the video )
i just reinstalled windows after using linux for a few months , gimp worked fine in linux (ubuntu x64) with the same hardware. i had the problem before in windows and i have it again with a fresh install
i have tried gimp 2.8.0, 2.8.2 and the same problem with the new one (2.8.4), same problem aswell with gimp 2.9 development builds. gimp 2.6 works fine with no screen tearing at all.
hardware specs:CPU: Intel® Core™ i5-2500K CPU @ 3.30GHz (3292.53 MHz)Memory: 16368 MB
OS Version: Microsoft Windows 7 64-bit Service Pack 1 (Build 7601)Graphics Card Vendor: NVIDIA CorporationGraphics Card: GeForce GTX 460/PCIe/SSE2Graphics Driver version: 310.90
Did you get the driver from nvidia's Web site? Check for firmware anddriver updates first.Yes a bad move :P but i need to use some software that's not compatible with linux.
An obvious 'solution' is to install Linux as a VM under Virtualbox.
I have bad screen tearing in gimp 2.8 in windows 7 x64, making it almost unusable! (see youtube link: [URL] look around 15 seconds into the video )
i just reinstalled windows after using linux for a few months , gimp worked fine in linux (ubuntu x64) with the same hardware. i had the problem before in windows and i have it again with a fresh install
i have tried gimp 2.8.0, 2.8.2 and the same problem with the new one (2.8.4), same problem aswell with gimp 2.9 development builds. gimp 2.6 works fine with no screen tearing at all.
hardware specs:
CPU: Intel® Core™ i5-2500K CPU @ 3.30GHz (3292.53 MHz)
Memory: 16368 MB
OS Version: Microsoft Windows 7 64-bit Service Pack 1 (Build 7601)
Graphics Card Vendor: NVIDIA Corporation
Graphics Card: GeForce GTX 460/PCIe/SSE2
Graphics Driver version: 310.90
I'm in the very early stages of a logo design and I've applied a drop shadow to a triangle shape. When I export to an eps file I get the problem below. Is there any reason for this? I'm very new to illustrator and I'm sure it's something simple.
View 5 Replies View RelatedIt's mostly on black clothing and bluejeans.
View 1 Replies View RelatedI'm tired of repeatedly seeing messages like this with no option to "Click Here if you don't want to receive this notification in the future." How do turn this one off?
View 6 Replies View RelatedWhat's with all the annoying popups on this forum page. Every time my cursor hovers over a link, some unrelated annoying pop-up blocks the view.
View 1 Replies View RelatedI designed a text document in illustrator and it looks great...in illustrator. As soon as I export it to a PNG, an annoying outline around text appears.
View 7 Replies View RelatedWhenever a annotative dimension is selected, its text are displayed with virtually all possible scales simultaneously on the screen, blocking the view of other objects and make the screen all a mess. Have a look at the attached picture.
Is there a way to get rid of it?
txt.png
how to anchor the image down to the baseboard. I'm using a macbook pro and the image is constantly scrolling all over. This could have something to do with the two finger sensitivity of the touch pad. But this also comes into play when using the point to point (polygonal) lasso tool.
While going from point to point with the tool if I drift to the outer borders of my screen the image takes off in the opposite direction. This is the most annoying feature ever introduced to Photoshop.
Hit the spacebar cursor turns to hand and move the image. Is how I used to do it (and still can). Why add this auto scrolling? I'm tired of chasing after the image and constantly recentering it.
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Relatedwhen I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies View Related of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies View Related