Is it possible to map something OTHER than F keys to Actions? I can't figure it out if there is a way!Is there a way to program a conditional into actions (e.g. if multiple layers are selected...)?
View 1 RepliesI have binded an alignment drawing into another drawing. I am still able to use the alignments for calculations however they do not show up in toolspace. What is the reason for this? Can i export the alignments and import them without having issues now?
View 5 Replies View Relatedi want to make a peper effect binded with the ring.
View 9 Replies View RelatedI downloaded a couple of actions from the web to my actions palette and they worked fine, but then I got greedy and downloaded a few more and thats when things went south. Now none of the actions work - by not working I mean when I mouse over the Play Selection icon at the bottom of the action palette I get that little circle with a line through it. This happens with the PS default actions as well (I also get the circle on the Stop Playing/Recording and Begin Recording icons).
Somewhere in the following is probably what messed things up.
I downloaded actions to my computer in zip files. Copied them over to the actions folder (or somewhere) and unzipped them. I went back to the actions palette and hit load actions and loaded them. On the second set of actions that I downloaded I remember thinking why am I copying and pasting these files - I bet I should cut and paste them, so I did and that may have been the start of the great crumble of 2004. PhotoShop help says: (under Saving and loading actions) Actions are automatically saved the the Actions Palette folder in PS7.0 Settings folder. If this file is lost or removed, the actions you created are lost.
I have searched for the settings folder and couldnt find it, but the actions still show up on the actions palette - they just dont run.
Im a little fuzzy on the details on the above steps. In fact, I probably did something different on each download.
one more thing, I reloaded PhotoShop, but still nothing.
My computer crashed and I removed all apps and reinstalled so now none of my actions appear. However I do have a backup file of all of them and want to reinstall but before when I was using cs6 ( Im assuming same thing as CC as it was all on the subscription plan ) I would click actions then the right arrows and it would bring me a big screen of all the actions ( even the ones that were just preloaded in ps ) and it was a big box with all the actions and some options to record etc...Now that box isn't there and it's just a single column drop down menu.
View 1 Replies View RelatedI have a set of 40 drawings and the title block is a shared jpg image that is referenced, is it possible to bind this image to each drawing, I have tred etransmit with no success.
View 8 Replies View RelatedI am attempting to bind a logo in my title block and I don't see where I have the option to bind an image.
View 5 Replies View RelatedI have already done a smooth bind on my mesh and painted weight maps. But then I realized I need to add a bone into the joint chain. It is on an extremity. Is there a way to add a bone in after binding without having to unbind and redo weightmaps?
View 1 Replies View RelatedI have a situation where it would be expedient for me to be able to bind only one instance of an xref and leaving the others intact. I have to do this for several different x-refs. Is this possible in Autocad 2008? If I use the xref manager I can only see an option to bind the entire reference.
View 7 Replies View Relatedi need to send a drawing out to a clent of our's. it has a XREF with it . so here what i do. open drawing, purge it, go to xref manger highlite the referrence, right click, hit bind, Bind Xref/DGN underlay window comes up check bind hit ok it go thur it stuff. the xref disapear from the drawing but it still shows in the xref manger with a coment on the command line that say : Error : at least one of the specified xref failed to bind for an unknown reason.
brl2008
I like to put my actions somewhere special on my hardrive, not in apps folder.
Now, in past, when I saved actions CS2 would "remember" where this folder was, making real easy to save.
Lately, it keep defaulting to save as in the app folder-- even though I did navigate to my special area on last save as.
How to bind/join an image file to an Inventor Drawing?
View 2 Replies View RelatedWhen exporting to CAD formats image files such as company logos do not stay within the CAD drawing created. The image files will appear as separate files image files such as JPG. Is there any method to export to CAD where the image files will be bind to created Autocad dwg file. Is this possible.
View 3 Replies View RelatedIm using autocad 2008 and i'm having difficulty in binding xref. i've been usign autocad for 3years now but sad to say, it's my first time to try binding xref.
So here's the scene, got xref file, then bind it, and then the whole xref drawing disappear but the xref filename is still in the list at the xref pallette? What should i do?
i modeled a geometry now i wanna to bind it to a skeleton, But i got a little bit doubt about smoothing its mesh before or after binding?
View 1 Replies View RelatedI'm having tons of trouble with the hair system for a character I've made. One that I'm very stumped on is for the rigging. I have a skull cap with hair on it and then the character separate. I have created a skeleton with which I want to smooth bind to the skin. While the smooth bind seems to be working, I'm having issues with the hair not following the global skeleton when I move it. The character herself moves, but her hair stays put and I don't know where to go from here to make her hair follow. I have tried combining the skull cap and character. I have tried grouping the skull cap and character. I have tried just about everything, but the hair will not follow. The most I could do was make the follicles and skull cap move, but not the hair. Any way to get the hair constraints to move along with the hair system after it has been binded, that would be great too as I have used hair constraints to form her hairstyle.
View 2 Replies View RelatedI realized many people need code in a txt file so I have attached two from my previous posts.
Both are having the same problem where the code runs to completion but does not update the xrefs. I am still guessing there is some xref edit that I am missing other than database.xrefeditenabled
Is there any way the images that we externally get permanently bound in the document. I know “collect for output”method but the asked option seems to be more compact.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
Is it possible to bind a drawing and have only the objects visible in the viewport to remain in model space after binding. I'm working with some pretty big models and am trying to reduce file sizes after binding.
View 3 Replies View RelatedUsing ACA 2012 and Windows 7 Pro x64. I have a drawing with two viewports. In one I'm showing the electrical layers and the base floor plan. In the other I'm showing casework and the base floor plan. All of the layers are contained in one xref so some are frozen in each viewport. When I bind that xref using the insert method (bindtype=1) some of the electrical layers show in the casework plan. I've tried everything I know of but I can't figure out how to surpress this behavior. If I use bindtype=0 the problem goes away but I end up with ugly layer names.
View 1 Replies View RelatedI'm pretty new to the whole rigging and skinning process, so in order to skin my model I've used the Interactive Skin Bind Tool (Skin>Bind Skin>Interactive Skin Bind Tool) which so far hasn't caused any problems. But when I started to modify the weighting on the geometry it appeared that the weights are reversed meaning that when using the Interactive Skin Bind Tool (Skin>Edit Smooth Skin>Interactive Skin Bind) on the left leg, I actually modify the weights on the right leg and vice versa (see image below).
(Btw, I'm using Maya2013 Students Version).
This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
View 2 Replies View RelatedI've been teaching myself inventor over the past couple of months so I can design the rear suspension setup for my car.
I've got the IRS modelled with enough detail to show my engineer the concept, but I want the suspension to "work", ie each link will move as the suspension flexes.
I'm attaching the arms (blue, dark green, red and yellow) to the cradle (orange) using the joint command, and selecting "rotational". This works fine and the arms can swivel about a single axis as they should. But as soon as I attach the knuckle (lime green) to the other end of all the arms using the same type of joint (except the joint with the blue lower control arm, which is a ball joint), nothing will move.
I understand that in real life, each joint has a bit of "slop" in it, allowed by rubber bushings, which prevents the whole setup from binding.
To my uneducated mind, the solution would lie in one of 3 methods: Convert all the joints to ball joints (I'd like to avoid this if possible) Add some kind of flexible rubber bushing to all of the joints (probably not possible) Get rid of the rotational joint constraints altogether and somehow mate all the parts to each other using work points, rather than a cylindrical bolt and eyelet, so that each arm has full range of movement in both the X and Y axes.
I am currently trying to find a faster way to create the images I use for our website at work. We sell phone cases with lots of different printed designs on but all of the actual surrounds of the cases are the same, either in Black or White.
I have created a Black and a White template and kept the front, back and side shots of the phone case on separate layers so they can later be manipulated as needed. I have all of the 'design inserts' saved as separate files which then need to be pasted into the templates (in between certain layers) and saved (one for each case colour).
I am wondering if there is an action or a way in Photoshop that I can set it to import the design into the template, then save the design, then import the next design and save, and so on and so forth? As we have well over a hundred designs and creating the images manually can take a very long time.
I have attached images of a template, a design and how I need it to look after.
Can I copy my CS3 personal actions to CS4? If so where can I find them.
View 3 Replies View RelatedI have created an action to prepare images for web posting. The action resizes images, sharpens them, adds a frame writes into the frame my contact details and lastly adds the name of the subject (location, or person's name) and then outputs the image to the correct folder. Typically I run the batch on a folder of say 30-40 images at a time.... sometimes upto 100. All run from either bridge or as a droplet via Lightroom.The action works great... except that each batch I run it on the "subject name" I need to insert is different. Is there any way at all to get the action to prompt me for just that bit of information. I've tried checking/ticking the dialog on/off option for the text field in the actions pallet and that works, but... when I'm applying the action to a batch of images it asks for the text EVERY time and doesn't remember what I typed in last time.At the moment, the solution I have is to open one image that I want to run the batch on. Make a copy of the action and enable a stop before the text prompt... run the script to that point. Then run/edit the text line, remove/disable the stop. If necessary create a new droplet. I can then go over to bridge or Lightroom and process the images using the new action.Ideally the what I would like to hapen when I'm running an action like this is when processing the FIRST image in the batch for PS to ask me what text I want and then use that same text on all the other 30 or 40 images.
View 4 Replies View Relatedi have about 100 photo cds with 80 to 100 images on each...i have copied each one to a dedicated external drive for storage and access...i would like to convert each cd (folder) to 16 base at 300dpi
to access an image now for photoshop, i have to process each image through graphic converter...
what is the "action" required to to batch convert these folders (retaining the cd number as well as image number: i.e., PCD245_001, PCD245_002, etc)...? presently, the images are tagged: IMG0001.PCD, IMG0002.PCD, etc.
trying to create an action which moves a particular item to a certain place every time, and then resizes. This place must be absolute, as I need it to be the same on a variety of images. The problem is whenever I try to use the move command, it uses a relative position. Is there anyway I can tell an object to move to the same place every time?
View 4 Replies View RelatedI use Photoshop 7 on a laptop with 900 mghz and 128 ram. Using actions along with batch processing my goal is to open a folder, and, in no particular order, apply the crop tool, levels, curves, and save for web.
Problem is I can't individually apply curves, crop, levels or save for web without batch processing coming to a stop. All files don't require generic applications. When contructing action I've inserted a stop with and without the "allow continue" option and still the batch processing stopped.
Is this manipulation of the action command not combatible with the batch processing command? Do I need to break action into several actions?
I have just discovered 'actions' in CS and started to use them to place a frame around some pics BUT one of the actions 'Recessed Frame' has me beaten & confused.
When I play the action I recieve the following messages:-
The command duplicate is not currently available. (and the others saying that others are not currently available) 'set, delete, set (again)' then the message 'warning no pixels were selected' and again currently not available, 'delete, channel frame edge' and at the end of all this I have a totally black picture area.
I want to do a simple thing - create a frame around my picture. The Help directions in the product are so ridiculous in that you cannot follow them. They tell you to look for Photo Frame which does NOT exist, then etc., etc. I've tried exploring Actions, reading all the help - the whole thing makes no sense.
View 5 Replies View Related