I recently bought Photoshop 12, having previously had Photoshop 9. With Photoshop 9 I could resize a photograph to 60mm by 40mm (say) and insert it into a text in Windows 7 at exactly that size and textwrap it. When I try to do this using Photoshop 12, the image fills the A4 page, even though it confirms that the resized photograph is 60mm by 40mm. What am I doing wrong?
View 1 RepliesHow do I resize a photograph form 1908 x 1016 to this filetype 1700 x 1300?
View 2 Replies View RelatedI am looking to extract natural noise from a photographs material and create a black and white layer out of it, but I am new to photoshop and unsure how to proceed with this.
For example, here is a photograph of a hard plastic gun.
I have seen on forums where users will find a good reference image and use it to create a new black and white noise picture utilizing the reference.
For instance the hard plastic noise from the gun, might look like this once extracted and done correctly.
how to produce something such as this?
I have installed LR 4.2 RC but when I check Lens Profiles these lenses are not listed although ACR 7.2 is supposed to be supporting them. Where I can get the profiles for these lenses and what is the proper procedure to install them?
View 4 Replies View Related1. On the vertical upright pipes i want to make the the ends at the top flat (60mm lenght) .Can this be done from within the frame generator.
Inventor 2012
It has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
This is something that I've been able to do without a problem in the past and now something has happened where it no longer works. When I insert a picture either into a new blank file or onto another picture and then click on the new picture to resize, it appears that the tool sees only the original document and not the photograph that I've just dragged onto it. It does not show the dotted line selection or the resize handles. Also when I try to use the resize menu option in either canvas or image option it changes the whole document and not the new photograph.
View 1 Replies View Relatedis there a way that I can turn a bunch of photographs into some 2d drawings?
View 2 Replies View RelatedWhat is the best way to acheive this affect?
View 2 Replies View RelatedI am trying to add some effects to a photograph of mine like the photo below. Can anybody tell me what tools and options i might use to create a background layer like this one into my own photograph, and maybe how to transform a face in a regular photograph to one like below?
View 1 Replies View RelatedThis is a photograph that was taken about a year ago with a standard point-and-shoot Kodak CX4230. The problem, as you can see, is bright sunlight behind the subjects, and therefore they are very dark. I've tried, but can not seem to improve it much, maybe it's impossible, I don't know. But I was wondering if some of you guys would take a stab at improving the photo.
View 4 Replies View Relatedhow to turn and photograph of a female model into what looks like an airbrush / pin up painting.
View 1 Replies View RelatedHow do I attach a simple grid to a photograph for the purpose of sketching. I prefer to draw from an image via photoshop as opposed to a print out being that the quality is better. There is also the added advantage of being able to zoom in.
View 1 Replies View Relatedi m making a 3d model of landscape design, i need some trees from photographs for visualization purposes in elevations. however it's not possible to extract them from a photograph neatly using extract tool from filter. how can i do a nice extraction?
View 2 Replies View RelatedBack in the early 80's I had an exhibition of my paintings and took photos from an Olympus OM-10. Each painting had a spotlight mounted above it and as you can see from the attached picture, the light glare is strong at the top of the painting (washing out the color and details) and the glare extends about halfway down the photo. I have Photoshop CS3 Extended. how to eliminate the glare from the top half of the painting?
View 3 Replies View RelatedI've heard that when making a photograph smaller in Photoshop the results are better if it's done in steps instead of all at once.
If this is true how much should it be reduced each time and should the change in pixels per inch be done before reducing the image
My camera saves at 300 ppi at 3872 pixels wide (sometimes they are cropped which makes them smaller) and for the web I need about 500 pixels wide at 72 ppi.
how i could make it look inflatable like a tube or those boats.
is there a stylize effect for this?
i havent found a tutorial to do this i need a body of a real person morphed into a 3d character.
can any one help me out with this?
Saw this effect in a magazine and wondered how I could go about recreating it in Photoshop. Is it some kind of warped shadow effect?
View 1 Replies View RelatedI am using Photoshop CS3 (windows) and I would like to emboss a logo to into a photograph so that the logo becomes part of the photo.
View 1 Replies View RelatedI have a few brochure files - and I want to make them look like this:What do I mean by "this"... I want to give them this folded look as not to have them on my portoflio so flat and plain...
Is there a way I can make like a template in Photoshop - including the "warping" so that the paper looks slightly curved? Would an Action be the way to go?
I am new to the entire graphics arts area. (I do network design for a living). I have been reading the "Adobe Photoshop CS5 Classroom in a Book" and I don't understand their logic for the order they say to use to retouch a photograph.
Their order is:
Duplicating the original image or scanEnsuring that the resolution is appropriate for the way you'll use the imageCropping the image to final size and orientationetc.
For their example they use a picture of a child walking around a ring with a brick wall as the background.
Now, lets say that I wanted the final image to be of the child only and 3 inches wide by 5 inches high, and 72 ppi (pixels per inch) for a print.
I disagree with the order of steps 2 and 3.
In step 2, I decrease the pixel information to 72 ppi.
In step 3, I crop only to get the child
then I import the resulting picture into say Microsoft Word and stretch the picture to be 3 x 5 it would seem to be that I would be way below the 72 ppi desired result.
What am I missing?
On opening a photograph in CS6, the image is incomplete.
I have just installed Photoshop CS6 (hope I'm not going to live to regret this), apart from the problems with installing plugins, when I open a file the image is incomplete with anything up to 25% of the image missing. If I create a duplicate background copy the problem is resolved. This is not satisfactory on software of this nature.
I am trying to take the following image and turn it into an embossing die.This is what I have done using the notebook filter but I wanted to ask you all if there is a better way to get a good clean single channel outline of an image like the one above.
Examples of embossing dies.
I have just learned how to apply a watermark or copyright to a group of photographs using an action command. But as the action is running, before each image closes, I get the window asking me to specify image quality (1 to 12). I have to hit 'OK' for each image before it closes, and the action completes the rest.
Does anyone know how to add this to the action or have 'ok' automatically hit so I don't have to push it for each image. A friend of mine has a piece of software that does it automatically, but I cannot remember the name of it and want to know if it is something within Photoshop that can do it. I am currently running PHOTOSHOP CS.
If I have two photos, one set at opacity 50% over the other, and saved as a JPG (see double.jpg), and I have one of them alone (see single.jpg) is it possible to get what the other image was?
View 9 Replies View Relatedhow i could make it look inflatable like a tube or those boats. do you guys get the idea?
is there a stylize effect for this?
how do u make the backround like that? how it looks like it's kind of a dark glow floating.
View 2 Replies View Relatedhow to desaturate a specific object within a color photo.
View 3 Replies View Related