If I have two photos, one set at opacity 50% over the other, and saved as a JPG (see double.jpg), and I have one of them alone (see single.jpg) is it possible to get what the other image was?
View 9 RepliesI am looking to extract natural noise from a photographs material and create a black and white layer out of it, but I am new to photoshop and unsure how to proceed with this.
For example, here is a photograph of a hard plastic gun.
I have seen on forums where users will find a good reference image and use it to create a new black and white noise picture utilizing the reference.
For instance the hard plastic noise from the gun, might look like this once extracted and done correctly.
how to produce something such as this?
I took some vacation shots with my digital camera. Unbeknownst to me some lip balm had rubbed off my hand unto the camera lens. The photo's were all perfectly exposed - no shake, no out of focus, but because of the balm on the lens they are now all blurry.
Question: Can they be saved, and if so how do I go about doing this?
I think Divide Scanned Photos feature is amazing! [URL] ....
For those scans I put black construction paper in the rear, it works like a charm.
However, my mom scanned multiple photos prior to us finding Elements and did not use a dark background.
Is there any way to salvage this or is it too late?
When we attempt to Divide Scanned Photos on a set of B&W photos with a white background, no luck.
PSE11 just spits out a copy of the same photo.
It does it every 4-6 times which is really really often since you brush about 10 times every 3 seconds or so when digital painting especially when shading, lighting, blending, etc with brushing.
Why does it do this? I cant recall when it started doing this but I think it was either when I updated from CS4 to CS6 or maybe it just randomly kicked in. I already updated my drivers and re-installed my tablet.
In the animation I am working on, I need an object to instantly go from 100% opacity to 0% opacity. The problem is, even if you use the opacity of the layer as a keyframe, the object will not instanlty vanish, even if it is only on for the timeruler for a quick amount of time.
I need a tool that will drop from 100% opacity to 0% instantly.
This is something that I've been able to do without a problem in the past and now something has happened where it no longer works. When I insert a picture either into a new blank file or onto another picture and then click on the new picture to resize, it appears that the tool sees only the original document and not the photograph that I've just dragged onto it. It does not show the dotted line selection or the resize handles. Also when I try to use the resize menu option in either canvas or image option it changes the whole document and not the new photograph.
View 1 Replies View Relatedis there a way that I can turn a bunch of photographs into some 2d drawings?
View 2 Replies View RelatedWhat is the best way to acheive this affect?
View 2 Replies View RelatedI am trying to add some effects to a photograph of mine like the photo below. Can anybody tell me what tools and options i might use to create a background layer like this one into my own photograph, and maybe how to transform a face in a regular photograph to one like below?
View 1 Replies View RelatedThis is a photograph that was taken about a year ago with a standard point-and-shoot Kodak CX4230. The problem, as you can see, is bright sunlight behind the subjects, and therefore they are very dark. I've tried, but can not seem to improve it much, maybe it's impossible, I don't know. But I was wondering if some of you guys would take a stab at improving the photo.
View 4 Replies View Relatedhow to turn and photograph of a female model into what looks like an airbrush / pin up painting.
View 1 Replies View RelatedHow do I attach a simple grid to a photograph for the purpose of sketching. I prefer to draw from an image via photoshop as opposed to a print out being that the quality is better. There is also the added advantage of being able to zoom in.
View 1 Replies View Relatedi m making a 3d model of landscape design, i need some trees from photographs for visualization purposes in elevations. however it's not possible to extract them from a photograph neatly using extract tool from filter. how can i do a nice extraction?
View 2 Replies View RelatedBack in the early 80's I had an exhibition of my paintings and took photos from an Olympus OM-10. Each painting had a spotlight mounted above it and as you can see from the attached picture, the light glare is strong at the top of the painting (washing out the color and details) and the glare extends about halfway down the photo. I have Photoshop CS3 Extended. how to eliminate the glare from the top half of the painting?
View 3 Replies View RelatedI've heard that when making a photograph smaller in Photoshop the results are better if it's done in steps instead of all at once.
If this is true how much should it be reduced each time and should the change in pixels per inch be done before reducing the image
My camera saves at 300 ppi at 3872 pixels wide (sometimes they are cropped which makes them smaller) and for the web I need about 500 pixels wide at 72 ppi.
how i could make it look inflatable like a tube or those boats.
is there a stylize effect for this?
i havent found a tutorial to do this i need a body of a real person morphed into a 3d character.
can any one help me out with this?
Saw this effect in a magazine and wondered how I could go about recreating it in Photoshop. Is it some kind of warped shadow effect?
View 1 Replies View RelatedI am using Photoshop CS3 (windows) and I would like to emboss a logo to into a photograph so that the logo becomes part of the photo.
View 1 Replies View RelatedI have a few brochure files - and I want to make them look like this:What do I mean by "this"... I want to give them this folded look as not to have them on my portoflio so flat and plain...
Is there a way I can make like a template in Photoshop - including the "warping" so that the paper looks slightly curved? Would an Action be the way to go?
I am new to the entire graphics arts area. (I do network design for a living). I have been reading the "Adobe Photoshop CS5 Classroom in a Book" and I don't understand their logic for the order they say to use to retouch a photograph.
Their order is:
Duplicating the original image or scanEnsuring that the resolution is appropriate for the way you'll use the imageCropping the image to final size and orientationetc.
For their example they use a picture of a child walking around a ring with a brick wall as the background.
Now, lets say that I wanted the final image to be of the child only and 3 inches wide by 5 inches high, and 72 ppi (pixels per inch) for a print.
I disagree with the order of steps 2 and 3.
In step 2, I decrease the pixel information to 72 ppi.
In step 3, I crop only to get the child
then I import the resulting picture into say Microsoft Word and stretch the picture to be 3 x 5 it would seem to be that I would be way below the 72 ppi desired result.
What am I missing?
On opening a photograph in CS6, the image is incomplete.
I have just installed Photoshop CS6 (hope I'm not going to live to regret this), apart from the problems with installing plugins, when I open a file the image is incomplete with anything up to 25% of the image missing. If I create a duplicate background copy the problem is resolved. This is not satisfactory on software of this nature.
I recently bought Photoshop 12, having previously had Photoshop 9. With Photoshop 9 I could resize a photograph to 60mm by 40mm (say) and insert it into a text in Windows 7 at exactly that size and textwrap it. When I try to do this using Photoshop 12, the image fills the A4 page, even though it confirms that the resized photograph is 60mm by 40mm. What am I doing wrong?
View 1 Replies View RelatedI am trying to take the following image and turn it into an embossing die.This is what I have done using the notebook filter but I wanted to ask you all if there is a better way to get a good clean single channel outline of an image like the one above.
Examples of embossing dies.
I have just learned how to apply a watermark or copyright to a group of photographs using an action command. But as the action is running, before each image closes, I get the window asking me to specify image quality (1 to 12). I have to hit 'OK' for each image before it closes, and the action completes the rest.
Does anyone know how to add this to the action or have 'ok' automatically hit so I don't have to push it for each image. A friend of mine has a piece of software that does it automatically, but I cannot remember the name of it and want to know if it is something within Photoshop that can do it. I am currently running PHOTOSHOP CS.
how i could make it look inflatable like a tube or those boats. do you guys get the idea?
is there a stylize effect for this?
how do u make the backround like that? how it looks like it's kind of a dark glow floating.
View 2 Replies View Relatedhow to desaturate a specific object within a color photo.
View 3 Replies View Relatedany links to websites that shows you how to turn a normal 2D picture into a photograph?
Like you know, I've some picture I got from the web, and I want to use Photoshop to modify this picture so that it becomes a cool-looking photograph with the edges being flipped a little and there's all those white borders around the picture, like a real photo!
I know of some websites which I saved to my browser's favorites list, but my PC crashed and the links got lost!
way to make an image such as this one look any better using Photoshop.
I only have Photoshop 7.0 by the way.
As you can see either side of the bridge is very bleached out and over exposed.