Paint Shop Pro :: X4 RAW Inferior To Nikon ViewNX?
Jan 11, 2012
I just purchased paintshop pro X4 and it seems that the RAW processing quality is always inferior to the free Nikon ViewNX. Frequently, I can see that by viewing at 100 percent, corel raw processor loses fine details and frequently exhibits moire in some finer areas such as eyelids.
Are there any settings that I need to change in Paintshop Pro to gain better quality RAW processing?
My camera is Nikon D300s. Right now I process the raw in viewNX then export to tiff and process in corel, which I'd like to avoid of course.
View 7 Replies
ADVERTISEMENT
Nov 10, 2011
Why Paint Shop Pro x4 will NOT read jpg files directly from the Camera?? The directory tree will show the camera/the SD card/the directories for the pictures ... but No jpg pictures.
I can read and copy them directly from windows and Paint Shop will recognize and read the copied files. Not a big issue, just a nuisance. It would be nice to pick the pictures I want, directly from the camera.
View 5 Replies
View Related
Feb 20, 2011
I just finished making sure all 4 published patches were applied to my copy of Corel PaintShop Photo Pro X3. The Nikon D40X is in the supported camera list. When I try to open a NEF file I took today I get the following error: "An error has occurred while trying to read from the file." What am I missing?
View 14 Replies
View Related
Oct 2, 2013
I have been on the phone for a few hours to Adobe but they are stil investigating. When I produce a slide show using Elements 11 the pictures are no way near as clear as they appear in the folders. I just want to show my pictures without them looking like crap. They were taken using the highest quality photo on the camera, which is a new Nikon and look great when viewing through Elements Organiser. They also look amazing in the original source, eg My Pictures files. When making slide show it asks the quality and I select high.
View 25 Replies
View Related
Dec 24, 2011
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies
View Related
Oct 28, 2011
I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies
View Related
Aug 9, 2011
Is there a plugin available to import Nikon NEF files from my D7000 DSLR?
View 1 Replies
View Related
Oct 11, 2010
Looking for a way to open Nikon Image Files .NEF
This link is broken [URL]....
EDIT
I don't think this is PDN [URL]....and several folders down it looks like PDN but is not it leads to an "am i hot or not au site"
...usually it is [URL]...
View 4 Replies
View Related
Sep 25, 2012
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies
View Related
Apr 9, 2011
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies
View Related
Aug 20, 2011
if is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies
View Related
May 15, 2012
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
View 3 Replies
View Related
Oct 14, 2013
Ok, either I am totally loosing it, or it just ain't happening.
I cannot get the Nik HDR module to work with my PSP X5
It's installed, it shows up in my Effects menu, but it only imports one of the photos I have opened in my edit tab.
What am I missing??
View 1 Replies
View Related
Jan 30, 2012
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
View 2 Replies
View Related
Nov 2, 2012
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
View 3 Replies
View Related
Jun 26, 2011
I installed PaintShop Pro Ultimate X3 several months ago. It worked fine initially, but then stopped running and gave me an error message pertaining to a language error. In an effort to fix the problem, I have completely uninstalled the application and removed all of its registry entries. I then reinstalled the program, which appeared to be successful, however, now it simply will not run and gives no error message whatsoever. When you click the desktop icon, it tries to load momentarily, then does nothing more.
I have removed my virus protection and my User Account Control.
View 2 Replies
View Related
Jun 12, 2013
What is the best method to upgrade from X3 to X5...should I remove X3 first for example?
View 2 Replies
View Related
Oct 13, 2013
During preparing a collage, when I try to save the project, I receive the the message that I don't have enough memory.I am using windows 7 and as far as I know, I don't have memory problems. I am working a lot with VideoStudio x4 without any problems.
View 5 Replies
View Related
Jun 11, 2011
I would like to add some Plugins to PSPPX3, I read/understand i should add the Plug-ins path at Preferences>File Location>Plug-ins - But there is no such option or Preferences>Workspace>Plug-ins - Same story
There was also no Plug-ins map or Workspace map in: C:Program FilesCorelCorel PaintShop Photo ProX3PSPClassicLanguagesNL
I installed PSPPX3 today, and i updated it and downloaded patch 1-4. How / where to install plugins?
View 7 Replies
View Related
Sep 21, 2011
When I open a jpeg in X4 it always says it is at 72 dpi. Even when I resize it so it is at 220, when I open it again and look under image information it always says 72 dpi. If I open the same image in any other editor, including X3 it reports the correct dpi. This coupled with the extreme compression is making X4 useless to me unfortunately.
I'm not prepared to sit and do the math to try and figure out what it is really at.
I have reset the number under preferences/general program preferences/units and it doesn't respond to that either.
For me, this version is problematic and not worth taking the time to learn. I need to be able to depend on and trust the information I'm getting from my software.
View 14 Replies
View Related
Sep 19, 2011
I normally upgrade every other version. I currently use X2 on a Windows XP computer. My primary uses are photo editing. My key interests are:
- processing 16 bit per color files
- use of layers and blends
- stereo photography (combining and aligning stereo pairs)
- use of various tools such as cloning and healing.
- Color management and Printing
Reviewing the product page, I haven't really found anything that shows a list of upgraded or added features. Most of the things mentioned appear to be in X2 already. Looking at the thread calling for future features, it appears that the things missing are still missing. X2 is serving me well, but there has to be some reason to upgrade?
View 11 Replies
View Related
Oct 7, 2013
I have a trial version of PSP X6. I'd like to move and use my workspaces from X5. I've tried everything I can think to do: point to the X5 workspaces folders, copying the X5 workspaces to the X6 folder, adding the X5 folders in the File Locations Preferences, etc.
View 1 Replies
View Related
Oct 25, 2013
I was wondering if I was able to get the Nik Effects that came with X5 into the new X6 download?
View 1 Replies
View Related
Jul 5, 2011
I understand you cant tag Raw Files . But tags have been put on some raw files on one particular date, the tags are incorrect tags but when i try and remve tags it says the software doesnt support it.
View 1 Replies
View Related
Dec 19, 2013
Using RAM Disk to speed up performance in Paintshop Pro? I like what I've seen so far except the program seems very slow. I have 32GB of RAM and have created a RAM Disk. I can manually copy images to the RAM disk, then work on them, then save them to the hard disk when done. Is there a way to make this automatic. I've set my temporary files to the RAM - trust this does not mess things up for Paintshop as those files disappear when I shut off the computer - but ain't that the intent of "temp" files. I'm going to try to set the Cache to this RAM as well.
Tried going to preferences and enabling the Scratch to my RAM disk (R:) but would not let me do that.
View 2 Replies
View Related
Dec 6, 2013
I am a beginner with PSP and would like to get some hints on the following two tasks:
- When I have two .JPG files, how can I form a PSPX3 picture with the contents of the two files arranged side-by-side which I can then store as a single .JPG file (this is the kind of picture I want to show at a presentation)
- When I have one .JPG file, how can I construct a PSPX3 picture that consists of the contents of this file (say, in the left half) plus a free space of the same size right adjacent to the loaded picture where I can add some text items?
Maybe even a suitable hint to where I find the steps to perform these tasks in the user manual (and how they are called in PSP terminology) would be a first step to find a solution (you need not copy the user manual!).
View 1 Replies
View Related
Oct 24, 2011
I need to put a title into a book which is not "face on". With the freehand selection tool I´ve found out that after using "pick" and pressing Ctrl I can play around with the text. However, I want to be able to use a parallelogram shape but haven´t got a clue how to arrive at it.
View 2 Replies
View Related
Jul 7, 2011
Just loaded PSP-X3 and when I load a photo onto my workspace i cannot get the marquee (I guess that is what it's called) to move the photo around or minumize it. that bar at the top of the picture I am used to in PSP9 that has the min, max, close icons.
View 3 Replies
View Related
Jan 20, 2013
I'm not good at PSP at all, and I know I am not using the most current version, but it seems to fit my need. I have been working on an invitation to party, and have saved it multiple times. I got it to look the way I wanted, exited the program, but this morning when I try to re-open it, the entire program locks up. It it saved in the PSP format. The thumbnail looks good, but for some reason I can't get the thing to open.
View 3 Replies
View Related
Nov 12, 2012
I have a jpg an need it as vectorgraphic. Is it possible to change it with PSP X?
View 3 Replies
View Related
Mar 15, 2013
There's a great divide between illustrators and engineers which is showing up in the difficulty of programming 3D printers using an illustration source. I would like to produce bas relief images from digital engravings and photographs but I've encountered several problems.
Problem one is finding a program which looks at an illustration and allows the user to determine where to bend and contour the surface and produces a file which a 3D printer can interpret.
Problem two is that all the present 3D devices are designed to make prototype devices. For bas relief, the Z dimension need only be an inch or two but height and width need to be greater than most 3D machines allow at present.
I raise this subject here because I wonder if Corel are alerted to the idea of producing interpretive 3D software. If the software existed, I feel sure that the hardware would quickly follow.
View 4 Replies
View Related
