Paint Shop Pro :: Selection Of KPT Filters In X3
Mar 19, 2010Selection of KPT filters that comes with Paint Shop Pro X3?
Do the KPT filters in X3 have any changes compared to ones that were included in the Corel KPT Collection from 2003?
ADVERTISEMENT
Paint Shop Pro :: X3U - Filters And Dropping Pixels
Jun 30, 2011I have PSPX3U. Just installed it on my new computer last week. I can't be sure, but I do believe I let it update. I then had the bug where Filters Unlimited filters don't work properly on a raster layer. I had this problem on my regular X3 (not ulltimate) after doing updates. My only option was to un-install PSP and re-install it and not update.
Now on this new computer, I did uninstallinstall and re-installed. I honestly don't remember, but I do think I still had a problem without doing any updates. I think I did one of the updates and my Filters Unlimited was back to working the way it should.
Now today I was working on something and found out that I have the dropping pixels bug. I thought I saw something off the other day. I do know this is a problem and I do see there's a fix. But it says that you have to install update 4 first.My PSPX3U version is 13.2.0.35.
I'm afraid of installing the updates because I can't afford to hae that filter bug again...but I also can't afford to have the dropping pixel bug.I tried to look at the updates to see which one(s) I would need to install, but only the first one tells you if you have a certain version then you don't need it. I couldn't find this for the others...unless I'm not looking in the right spot.
Paint Shop Pro :: X3 - Plugins And Filters Compatibility
Jul 23, 2011I just started using PaintShop Pro x3. Does PSP is fully compatible with ALL Photoshop plugins & filters?
View 2 Replies View RelatedPaint Shop Pro :: Use Of Filters Unlimited On Raster Background
Dec 2, 2011Just a question why cant i use Filters Unlimited on a Raster Background in PSP4. When i try it only fills a quarter of the image.
View 3 Replies View RelatedPaint Shop Pro :: X4 Paste Selection
Dec 4, 2011I have just upgraded to PSPX4 from X2, but have been using PSP since it was a JASC product. So far I am not very impressed with the new version. My first stumbling block was when I couldn't increase the canvas size on a photo that I'm restoring (9120w x 13298h). A chat session with Corel identified the issue as being a 10000 pixel limitation now being imposed. Although I can work with images >10000, I can't increase any dimension past this figure. Who had that brainwave? I had to put my image into PSPX2, increase the canvase size and then load it back into PSPX4 to continue.
Now today, another issue pops up. I can't seem to find other hits on pasting selections within the forum though, so I am raising this.
I loaded two tif images into my Edit workspace. One image is fairly small and I copied this, switched to the larger image and tried a 'paste as new selection'. This worked OK. The I switched to a paintbrush and made a small change to the main image. I then tried pasting the copied image again with 'paste as new selection'. This time the program locked up with Windows trying to find a resolution. PSPX4 then crashed. I have tried various scenario's to narrow the cause down. So far it seems that I can paste a new selection as many times as I want, but as soon as I use a paintbrush to effect even a small change PSPX4 locks up. It either then crashes, as explained earlier, or I get the round no operation mouse cursor displayed. At this point the main control box buttons (close, minimize etc.) won't respond, neither can I switch to the Manage or Adjust areas. The menu trees respond, but selecting File/Exit doesn't work. I have to use Task Manager to close the program.
I had installed SP1, but trying to identify the cause of this issue I uninstalled X4 and reinstalled the base version from CD (332). All settings were left to default. This is how I am running now, so it looks as if SP1 makes no difference. I have also tried using jpg instead of tif, but this also makes no difference. At the moment I'm thinking of ditching X4 and going back to X2.
I am running Windows 7 Ultimate 64 bit with 8Gb RAM.
Paint Shop Pro :: Centering A Selection?
Aug 16, 2013I'm using PSP 8 and suspect this will prove embarrassingly obvious...
What is the quickest way to centre a selection horizontally? IOW, the equivalent of using Objects > Align > Horz. Center in Canvas (Alt+o+a+z).
I often need to do this to shift titles if I've prematurely merged text layers into the background.
Paint Shop Pro :: X3 Selection Tools Not Working?
Oct 23, 2011The selection tools, i.e. shape, freehand and magic wand, have suddenly stopped working. I do freehand, double click and nothing happens. The freehand selection actually disappears. I click magic wand and nothing happens.
View 3 Replies View RelatedPaint Shop Pro :: Insert Into Selection Without Distortion
Feb 25, 2012I want to copy an part of image A into an selection of picture B.
Using the command " Insert into selection" works, but i get a distortion of image A. The relation of heigth/width is changed by PSP, so that image A fits into the selection, but this is not what I need. I would prefer the parts of image A that don't fit into the selection being cropped.
Paint Shop Pro :: How To Lower Exposure Of Selection
Jun 24, 2012I have several raw photos, and when my exposure has been brought to -2 the glare of the flash on skin is much warmer and acceptable. However, the rest of the photo is not. What is a good practice for reducing exposure for just my selection of the photo?
View 4 Replies View RelatedPaint Shop Pro :: Crop To Selection Creates New Image?
Aug 19, 2011Suddenly today when I use the "Section tool" on a photo and then 'Crop to Selection' a new image is produced of the cropped selection and the old image remains. I don't want this and it has never happened before in the years I have been using PSP.
I want the existing image to be cropped and then I will save it.
How I can reset the "Selection tool' to do what it has always done? BTW I had earlier today used the "Crop" tool and ever since the 'Selection tool' has been creating a new image.
Paint Shop Pro :: X4 - Selection Tool Reset To Default?
Oct 3, 2011How the tools all have the option to reset to default. I was doing something earlier that required the selection tool and I saw that it had been changed, so I clicked to reset and nothing happened. All my other tools reset just fine.
View 14 Replies View RelatedPaint Shop Pro :: Creating A Selection In Floating Object
Sep 10, 2013This is something that I could do very easy with PS, just CTRL + click in the layer and the object get a selection around it. How I can create a selection for an "floating" object? Sometimes I need to remove some pixels around the object I cant find a way to select the contour of the object again.
View 4 Replies View RelatedPaint Shop Pro :: Make A Stroke In Selection Line
Jul 11, 2013I made a selection with the Freehand-Tools and I need to make a Stroke in the selection line! How can I do this?
View 2 Replies View RelatedPaint Shop Pro :: Selection Tool Custom Sizing?
Apr 23, 2012I know you can custom size the selection tool by pixel position, but Is it possible to set the custom size of the selection tool to inches? For example I would like to have a custom size of 5 x 7 inches so I can place over an area and simple copy and then paste that 5 x 7 selection as a new image.
View 3 Replies View RelatedPaint Shop Pro :: Selection Is Surrounded By Coloured Line?
Jul 14, 2011When I make a selection in a picture, the selection dotted line shows a coloured border, which is the colour of the second choice in the Materials palette. Especially if I make an addition to the selection, this coloured line runs right through the selected figure. If I copy the selection, undo the selection and then paste as a new layer, the coloured border, especially in added areas, remains visible.
how I can get rid of this strange artifact? I didn't use to have it, it emerged a few days ago.
Paint Shop Pro :: Paste Cuts Off Bottom Portion Of Selection
May 23, 2011I've been having a recurring problem with Paint Shop Pro X3. When I try to paste a selection into an existing image, it cuts off the bottom 5-10 pixels. I hover over the existing image with my selection, and the entire selection shows up -- I move it into place, and once I paste it on, it cuts it off -- here is a screen shot -- left side shows full image when still 'selected' -- once I right click it cuts off a part of the bottom portion.
This is a piece of another image being pasted into a blank, new image. They are sized the same height (though that doesn't matter) and after paste, chop chop.
Paint Shop Pro :: Cutting Sections Out Of Image Using Vector Selection
Jul 8, 2012I want to cut out a section of an image and drop it onto a white background in another image.
I drew a vector point to point line around the area I wanted to copy and chose "selection from vector object" thinking that this would select the region inside the vector object. I then tried "copy merged" from the menu and pasted the clipboard into the new image. Now this didn't work and the copy only seems to copy the what is under the selection line rather than what is enclosed.
Paint Shop Pro :: Selection Using History Pallet To Extract Object
Feb 8, 2012What is made in an exact moment (2:50) of the tutorial bellow, in which "history" pallet is used together selection to extract object. It seems to bring a better result than using "object extractor" tool.
So, my question is related to handling the "history" pallet as showed in 2:50 tutorial. It seems the "undo" is applied to the first "selection" action, but I couldn't make as in the tutorial. My PSP version is X4 and the tutorial version is X2. I don't know if something has changed and I am unable to make it in PSPX4.
[URL] ...
Paint Shop Pro :: Bottom Pixels Deleted After Pasting Selection Into Image
Aug 13, 2011Using the below steps causes a string of pixels to delete, and forum I visited [URL]..... with similar issues think it's a bug in PaintShop Photo Pro X3 13.0.0.253. I now have version X3 - 13.2.1.20 after updates.
1. Start a new image, with solid background.
2. Selection tool, rectangle, add/shift, feather 0, anti-alias on.
3. Draw out a 3" rectangle. Flood fill or paint in the shape with a solid contrasting color. Leave shape selected.
4. Go to Edit, Copy.
5. Go to Edit, Paste as transparent selection.
6. Place the copy to the right and up against the first shape.
7. Go to selections, Select None.
Take note that there is a string of pixels that is being removed. The above steps were posted by my peers in the PaintShop Photo Pro community forum I mentioned above.
What I’ve been trying to do is Paste As New Selection from one image into another, and pixels are cut off once I click to release the selection. I’ve tried different things, like expanding the canvas of the pasted image, and other things, but nothing has worked.
Paint Shop Pro :: Encompass Part Of Photo With Selection Doted Box Stops
Nov 23, 2012In using the selection tool that encompasses the part of the photo with a selection doted box ,it takes several attempts for it to work. It stops intermediately before i lift my finger off the button ? I am using the newest Paintshop Pro x5 W/Win 7.
View 4 Replies View RelatedPhotoshop :: OSX P'shop Filters?
Apr 26, 2003I have been using P'shop on a Mac for a while now (several years I think) and love to 'talk shop'. Anyway, my question for the moment is about filters. Two of my favorite filters before OSX were KPT Gaussian Glow and Gaussian Electrify. I don't' think they are available for OSX (I looked at Corel's web site and didn't see them) and wanted to know if anyone knew of any filters that were similar and written for OSX?
View 2 Replies View RelatedGIMP :: Magic Wand And Filters Extending Beyond Selection
Nov 22, 2013Recently I noticed that when I apply some operation on area selected with magic wand (for example desaturation or brightness modification) not only pixels from selections are modified. When modification has big strength I can see that pixels laying even 20 pixels away from selection border are slightly modified. From the other hand: I don't see this effect on normal selections. So I have two questions:
1) Is it any way to manipulate strength of this effect (modify maximum affected distance)?
2) Is it any way to use this effect with other kinds of selections?
Paint Shop Pro :: Exporting Frames From Animation Shop
Dec 24, 2011Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedPaint Shop Pro :: Will Animation Shop Run On Windows 7 Next To X4?
Oct 28, 2011I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedPaint.NET :: Apply Filters To Hundreds Of Images At Once?
Oct 20, 2013I need to apply filters to hundreds of images at once. Is there some type of Batch plugin to do this? I found the Bulk Image Processor but this does not apply filters, at least as far as I can see.
View 4 Replies View RelatedCorel PHOTO-PAINT X6 :: Topaz Filters Can Be Installed?
Oct 6, 2013Does the Topaz filters can be installed in PhotoPaint X6 (64 bit).
View 4 Replies View RelatedCorel PHOTO-PAINT X5 :: Locked Effects Filters
Jun 26, 2012I know this problem is probably right in front of my face, but when i import a pic in photo-paint x5 i'm unable to use most of the "effects" filters as they are locked.
View 4 Replies View RelatedPaint.NET :: How To Export From Photoshop Original Filters And Import Them
Jun 5, 2012How to export from Photoshop original filters and import them into Paint.NET?
View 5 Replies View RelatedCorel PHOTO-PAINT X5 :: Print Layout Similar To That In Paint Shop Pro?
Sep 25, 2012Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedPaint Shop Pro :: Paint Brush And Eraser Stopped Working
Apr 9, 2011My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View RelatedGIMP :: The Filters Menu Option Shows Only Repeat Last / Re-show Last And Reset All Filters
Nov 5, 2013I downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies View Related