Paint Shop Pro :: Blue Sky Backgrounds Seems To Be In Lines
May 2, 2012
I've taken several shots of buildings with a Canon EOS (each photo 4mg / JPG) with very dark blue sky backgrounds. There are no clouds in the sky. I need to resize each photo down to approx 350kb for the Internet. I'm using Corel Paint Shop Pro X2. I've run various process's like smart photo fix, sharpen, then improved the saturation and then re sized at 75% "weighted average". When I view the photo on the Internet the blue sky seems to be in lines. How I can stop this and get an even blue colour.
View 14 Replies
ADVERTISEMENT
Nov 13, 2013
I have been using the background eraser to take off white backgrounds and keep the inside (gif) part of them. The eraser does erase the background and does output it as a .gif however when I go back to look at it as a .gif, it is still on that white background.
View 4 Replies
View Related
Aug 19, 2012
I just purchased Paint Shop Pro X4, and do have one question about making transparent images.
I’m designing a simple, basic text-only logo for my web site. I know how to make the image transparent. That’s not a problem, if I'm using a plain solid color as the background of the page.
What I would like to know is this: How do I make the text logo transparent if the page background of my web site is an image, such as a photograph, or textual wallpaper. I’ve never tried that, and am wondering if that will make the creation of a transparent GIF more difficult.
Is the procedure for making a transparent GIF different in this case? If so, what steps should I take?
View 4 Replies
View Related
Jan 2, 2013
Few pointers as to getting rid of a blue cast on photos. I am using PSPx5.
View 14 Replies
View Related
Aug 1, 2011
I have a problem with the display of images that come out too blue. The thumbnail looks correct but the large preview image has too much blue. I have processed the same raw images in other software with no issues but this seems to be an issue with Paint Shop Pro. Is there a setting that needs to be changed?
Once I open the image the image in the raw converter it shows the color balance "As Shot" as a different value that what the Adobe software reads. Not sure why. You can try and adjust the blueness out of the image but why do I need to do this all the time when I don't have to in other programs.
If I open any image in the full editor the thumbnail takes on this too blue look as well, even if no color adjustments were made.
I have attached 2 screen shots that show the problem.
View 7 Replies
View Related
Mar 22, 2011
After making a cutout in the cutout-lab/preview/ok, returning to the main workspace area, there remain, unlike in the instruction DVD, 2 blue dotted lines around the object: one from the rectangular box and one showing the cutout outline. As a result I can't make a clip mask from the object transparency box.
Has it to do with settings not mentioned in the dvd? The 'remove mask button' is inactive. I just picked some bitmaps from the internet and tried to make them into one.
View 14 Replies
View Related
Dec 28, 2011
About 10-12 years ago, I had a simple version of Corel Draw or some similar name. Then I got involved with Adobe products. But it is nearly impossible to draw simple straight lines with Adobe! The Corel program I used to have enabled a straight line to be drawn by clicking on one spot, then holding some button down (don't remember which) and clicking on another spot. Viola!
So my question is: "Is it simple to draw straight lines in Paint Shop Pro? If not, what program do I need to purchase.
View 3 Replies
View Related
Jun 1, 2013
I cannot produce Curved Lines (read: Arcs). I'm wondering if the capability to do this in the PSP X5 program is glitchy--perhaps requires a fix? Normally, I formulate short-cuts or 'tricks'--nothing has worked here for my purposes however.
View 1 Replies
View Related
Oct 26, 2011
Win 7 64 bit PSPX2 Ultimate (12.50)
If I open a new image Raster background (white) RGB-8bit/channel and put the size in inches centimetres or millimetres I get a black 1px line horizontal and vertical on the image. I either have to paint over it or open the image using pixels as the sizing.
Example: New image 1black spot saved.
[URL]
I have only just found out how it occurs. It also is the same if I install PSP on Laptop (win7 64 bit)I make animations and can use upto 50 images replicating from the 1st image so if I forget to paint out the lines on number 1 image (as I did last week) and then put them through an animator and then scream when I see the black lines on the finshed animation. At least I now know to always use pixels as the size of the images.
Of course now I know I will try and use pixels when opening a new image (but would sooner use the other measurements )
View 4 Replies
View Related
Jul 2, 2013
I want to copy a black and white photo which was printed (old original 'wet' method) on matte paper. When I scan it the scanned image has thin white vertical stripes through all the dark areas of the photo. I have located a method of removing them using Photoshop (using layers etc) but cannot duplicate those 'instructions' using PSP X2.
how I can remove these thin stripes (they make the photo look like everyone one is wearing pin striped clothing).
View 14 Replies
View Related
Dec 31, 2011
i have been using sketchup now for about a year but as you know, the models are never really complete without a background in them. there are ways right in sketchup to add a backgroung but they cant be rendered because the background disappears and leaves only the rendered model. i downloaded gimp to see if i could add a background there but the instructions are so vague that there's just no way i can understand what they are talking about. i know nothing about transparent backgrounds or what it has to do with adding a simple jpg photo background to my model. the more you people try to explain in your ''image editor terms'', the farther away from understanding i get. i know for a fact that there are hundreds of people out there who feel exactly what i'm feeling but they don't want to appear to be idiots so they clam up and so then these questions are never asked and these statements are never made and consequently, you people just on talking in some other vague language that very few beginners can possibly relate to. i just want a simple instructive path as to how to bring a picture to the clipboard and then bring a background picture into that first picture, blend them togeather and have a finished scene. is that a lot to ask? if you want people to use your product, then find a way to speak to them so that they can understand what the hell you're talking about. i do realize that there are those people out there who fully ''get it''...but for every one of that do, there are 50 more that do not.
View 15 Replies
View Related
Sep 26, 2011
how to remove the blue lines? these are rulers lines..
View 3 Replies
View Related
Jan 3, 2012
What are they for and how do i get rid of them? Whenever I use the rectangle tool and place the rectangle I immediately get like 5 or so of these little gray boxes popping up. Within the boxes are two lines, one blue and one red. The lines are either parallel or perpendicular to eachother. I have to click an 'x' to remove them. This adds a lot of extra time and hassle to the process of making simple designs.how to disable them.
View 5 Replies
View Related
Sep 6, 2013
I have encountered a strange symbol that affects lines:
2 little blue boxes. What happens when i see these symbols, If I move a line and it's connected to other lines it will latch onto them and effectively drag them. I don't want it to do this, I don't know what to search for, spent a few days trying to find what it is because it nearly ruined a whole development!
Running autocad 2013. Here's a picture:
print.jpg
View 9 Replies
View Related
Dec 8, 2011
I must have done something to cause two blue boxes to appear to the right of my crosshair whenever I hover over a line. Also, the lines double up when I do this! What's causing it and how do I get rid of it?
View 7 Replies
View Related
Mar 20, 2011
what i would like to know is: how can a i make letters "transperent" so that i can fill it with some different backgrounds?
just like in the picture i attached.
View 2 Replies
View Related
Dec 21, 2013
Is there a simple way of cutting a figures or items away from the backgrounds of one or more photos and and merging them into a paint net background image to make it look like the figures belong in the paint net image,not just superimposed or floating on the front of the image. I have been trying to create an image of my grandchildren together in one picture and not just stuck on, also trying to do this with animal images
View 7 Replies
View Related
Jan 15, 2014
what I have been doing to work with transparency: bring up GIMP to add an alpha channel and set part of an image to transparent. Save and use in Paint.net.Today, for example, I wanted to create a M + W logo, and the result looked like this:I set the font to Engravers MT, put a red W on an image.Selected "All", copied to clipboard, then pasted to a new image.Vertically flipped the new image, making it an M, changed color to blue using Recolor tool. Saved it as PNG, closed image.Started GIMP, opened the blue M image.On GIMP menu, selected Layer --> Transparency --> Add Alpha ChannelUsed Fuzzy Select Tool to select the area outside the blue MHit delete key to remove color of fuzzy selection (converting it to transparent)Save image as PNG and exit GIMP.Back in Paint.net, open the M image.Select All of Image, copy to clipboard.Paste into New Layer of W image.Adjust position of this transparent selection layer to achieve desired resutl as above.Save the completed image.I find GIMP to be very hard to work with, and prefer working with Paint.net. It would be so nice to be able to create an alpha channel and make a transparent area of an image inside of Paint.net.
View 3 Replies
View Related
Dec 12, 2012
I have been removing photo backgrounds, saving them as .png and using them in a Power Point Project. Apparently when I reopened that PowerPoint project to add more photos, Libre Office's Impress opened the .ppt file rather than PowerPoint. When I had added all of the png photos and saved the ppt file again I saw that it was "Impress" not PowerPoint that was saving he file, but it still saved it as a ppt file.
I was not concerned until I went to open the ppt file with PowerPoint and discovered that PowerPoint could not open that ppt file. I decided that I had to start fresh and add all of the png photos in a new Pow1erPoint Project. Then I found that he transparent background ol all of the png files had been changed to black. I must have transparent backgrounds. So I took each photo back into Paint.Net and used the Magic Wand to remove the backgrounds, then saved them as png files. When I sent to use those edited .png files the backgrounds were still black. I have tried removing those black backgrounds several times but they continue to have black backgrounds. what I can try to get the transparent backgrounds back?
View 4 Replies
View Related
May 10, 2012
I am having a problem with dimension lines defaulting with blue text. I have set my defaults to black but it does not change. Other designers in my company are having the same problem.
View 5 Replies
View Related
Dec 11, 2012
What is the blue flag flyout? I cannot move any lines or polylines without it moving whatever is attached. I do have service pack 1 installed.
View 7 Replies
View Related
Oct 9, 2011
When I copy, I only get an outline of what im copying in blue lines.
I must have played in the settings somewhere.. how to put them back?
View 3 Replies
View Related
May 22, 2012
I have a picture of a shovel of which I want to change the red colour to blue.
What is the simpliest way to do this in Paint.NET?
I have tried many things things, but I get a lot of trouble with shadows and sun shine areas.
Attached Thumbnails
View 12 Replies
View Related
Feb 1, 2011
If I have an image that has plenty of a certain hex colour A in it, and I want to change all pixels of that colour to another hex colour B, how do I do that?
I want it to intelligently convert pixels of other colours, i.e. a colour that is half-grey half-A becomes half-grey half-B, a pixel that is transparentesque A becomes transparentesque B, and so on.
How do I do this on paint.net or possibly with any online tool available.
View 2 Replies
View Related
Nov 28, 2012
Can paint.net do this.. [URL] .........
If it can indeed do it. how?
View 5 Replies
View Related
Aug 12, 2012
I just received the disc with all my wedding photos and so many of them are ruined by either a rainbow glare or a blue glare. I am so disappointed in how the pictures came out and have spent the last half of today trying everything to fix them.
Is it possible to fix a rainbow or blue glare.
Here are a few (if html works) but I have about 15 like these.
View 4 Replies
View Related
Dec 24, 2011
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies
View Related
Feb 17, 2014
Is there a plugin or something that will allow me to change all pixels that match a certain color value to another color value? So let's say I have a picture that has red, green and blue on it. And I want to change every pixel that is blue to yellow.
View 5 Replies
View Related
Jan 16, 2012
I am trying to get the text to curve around the blue banner its on.
View 5 Replies
View Related
May 21, 2012
I wrote my signature on piece of paper, then scanned it in, removed the white background, leaving just the signature in blue ink on a transparent background and saved it as a .gif. HOWEVER, I need to make the signature darker blue. I've used clipping masks in the past, but cannot figure how to do this in Paint.net.
I made duplicate copy of the original .gif, then created a layer and filled it with a darker blue. What do I do from here so that when I put the layers together the signature is darker, but the background is still translucent?
View 6 Replies
View Related
Mar 31, 2011
How to directly Edit the 'Blue Channel' in a image? Im trying to make a image for a game, and the blue channel dictates how much parts of the image will glow when Bloom render is active.
View 6 Replies
View Related
