Paint.NET :: Paste Words Onto Splatter Background?
Jan 13, 2012
I'm making an ad for my group on ROBLOX. I'm using PyroChild's splatter plugin and I'm typing the words I want on the ad on a separate background (So I can turn them diagonally, ect) but if I "Rectangle select" the letters and past them, it puts white over my splatter, If I "Magic wand" the letter it doesn't get the whole letter (I'm typing In a font where each letter has a few different pieces.) How do I put the words on the background without messing up my background?
View 3 Replies
ADVERTISEMENT
Sep 14, 2011
i love the paint splatter in the background! I was wondering if there is a plugin or a brush that can supply that look.
View 1 Replies
View Related
Oct 1, 2011
This is a notation to a photograph that my grandfather took. The photo was mounted in one of those old albums that had black paper pages. The notation was written with some kind of white colored pen.
How to get the hand written words to stand out better and be on a pretty much pure black background.
I have played around with simple contrast, brightness, etc. and some other features but not gotten the effect I would like. I might not get it but I would like suggestions on a technique that would do this as automatically as possible. I know I could spend the time to get down to a pixel level and clean up the writing then drop it back on to a new black layer. This would be very time intensive and I would have a big learning curve on how to do this.
Attached Thumbnails
View 11 Replies
View Related
Mar 18, 2005
I've seen it many times before and I just can't seem to get it right. I'm looking to find out how to make a paint splatter look genuine, you know, as if you just dropped a bucket of paint or if a fountain pen dripped.
View 7 Replies
View Related
May 21, 2003
What I'm trying to find is either a filter, or a tutorial on how to create, an effect with using multiple colors, for one effect.
Ok follow me for a sec on this, say you have a vechile and you run into say 7 colors of paint, it splatters across the front of the vechile, and runs down the sides, where can I get a filter like this or find a tutorial for this very effect?
View 4 Replies
View Related
Feb 23, 2012
I have never used splatter since it never shown on my screen. I have tried reinstalling it.
View 1 Replies
View Related
Mar 11, 2012
where I can get the Splatter Plugin? I went to Pyrochild's thread, but it said I didnt have a spreadsheet thing when I clicked download.
View 2 Replies
View Related
Jul 10, 2011
I know you go to Effects>Artistic>Splatter but I can never seem to get it to work.
View 2 Replies
View Related
Sep 11, 2007
how to make a paint/blood splatter in photoshop? every where i looked they are offering a brushes for download but I need a tutorial so i can make my own.
View 2 Replies
View Related
Oct 4, 2007
where to get paint splatter brushes and fonts?
View 4 Replies
View Related
Oct 28, 2007
I am trying to put words over a transparent background....These words will be placed on a deer hunting video that I am making......Can anyone help me with getting the background transparent? When I try to do it i always get a white background....
View 4 Replies
View Related
Nov 19, 2013
Just wants to get some simple "animated words" traced with a white background (instead of the background being "dimmed" looseleaf paper)
To explain, here's a comparison example of what I'm trying to achieve:
Imagine the phrase:
EGG-CELERATING THE PACE OF FERTILITY
Where the letter E is:
The vertical part of the E is a stalk of Celery
The horizontals of the E are cartons of Eggs.
Where the "P" of Pace looks like a basic line drawing of a "pacing shoe"
...with perhaps "anxious" looking eyes drawn inside the shoe
...yet still look like a P
...and the remainder is [roughly] like my attached letters on Dim looseleaf background. (see attached)
How would you achieve the EGG-CELERATING phrase? I bet an expert could achieve this within 1/2 hour or less, can't they? So I'm trying to achieve the same as the above:
...albeit it's a different phrase, and different BASIC pics.
...in other words, it's mostly outlined-alphabet, but including 4 basic pictorial-letters, and some more letters containing "eyes"
P.S. Regarding the attachment, note that I placed that in a Layer which I called Layer1
Then tried selecting it & changing background to White But was unsucessful.
View 14 Replies
View Related
Jul 22, 2013
Currently working on a PowerPoint styled animation.I've parented the source text of 5 text layers to 1 text layer so I can easily alter the text. It is essential that I have 5 identically texted layers.
My requirement isn't much: To assign colors to individual words without having to separate those words into different layers.
View 10 Replies
View Related
Dec 9, 2012
In a jpeg picture of a document, is there any way you can hi-lite certain words within the document.
View 2 Replies
View Related
Jul 18, 2013
I used some white rectangles to change the shape of black letters on a white background. Now I want this combination of letters & rectangles to be just letters when I select them etc. (make the white rectangles blend with the background and still have the shape they left on the letters) How can I do that?
View 29 Replies
View Related
May 1, 2013
I'm having in CS6..I have a text block with a couple of styles in it (headings have one look, body copy has another). Here and there, some words are on bold. When I select some bold words and change the color of them, some other bold words in some other paragraph also change color. Not all bold words... just some. The behavior is unpredictable, so the exact words that get changed will vary, but once it starts to happen it won't stop. When I try to manually fix the other words (hopefully I noticed them before my client!) and change them back to black, sometimes that change reverses the color on the original words too. Sometimes not; it's like the effect is sometimes two-way and sometimes one-way. It becomes a real logic puzzle sometimes, a maddening game where every change affects something else and you can't find the combination of actions that will do the simple thing you want.
I haven't noticed it happening with non-bold text, but that could just be coincidence.
When this happens, the only fix seems to be to rebuild the text from scratch in a new text box. (Copying it all and re-pasting it does not seem to work—unless possibly I paste into a different document entirely.)
View 9 Replies
View Related
Dec 13, 2013
What is the best way to paste an image into a background and have it blend nicely with the background to avoid jaggies.
I've been playing with the blur and smudge icon but then it depends on my eye and I lose resolution around the edges. I guess what I would want ideally is for a way to paste my image then have a slider or a way to select the amount of anti aliasing from image to background.
View 2 Replies
View Related
Aug 7, 2012
Quite often I use teh brush tool on clouds, to define edges a little better. However when I do it leaves 'splatter' all over. Sometimes due to colour and texture you can't see it very well, but most times I have to cancel the edit because of this splatter.
I can only describe splatter as spurious drops of brush effect.
View 2 Replies
View Related
Jan 10, 2014
I know how to use the "I" intelligent scissors tool and paste into a window with a transparent background.
But I saw a NASA video where this very intricate tree with branches and no leaves was made into a PNG perfect. Then they had the stars moving behind it. They didn't use a scissors tool. There was too much detail.
View 2 Replies
View Related
May 26, 2011
I was wondering if there is a way to always paste to a new layer?
View 2 Replies
View Related
Dec 5, 2012
I created my first project that consists of 4 layers and saved it! However, when I tried to paste it into a Word doc only the background layer (a photo) shows up without the other 3 layers containing writing.
View 2 Replies
View Related
May 9, 2013
I literally downloaded this program today, but I like it so far. However, I'm currently attempting a small new project and it seems I've hit a wall.What I'm trying to do is take a picture of a silhouette, remove the white background, and somehow change the black silhouette into a plaid pattern so I can paste it on top of a new background of my choosing. I've already figured out a satisfactory method for removing the background by perusing the forums here, but I've yet to come across a topic to solve my current issue.
View 3 Replies
View Related
Dec 1, 2013
Why is it necessary to have an image open before using the "Paste as New Image" function.
I want to be able to copy an image from another program and paste in into PSP for editing. I can only do this if I first open a new or existing image in PSP before doing "Paste as a New Image".
View 1 Replies
View Related
Dec 4, 2011
I have just upgraded to PSPX4 from X2, but have been using PSP since it was a JASC product. So far I am not very impressed with the new version. My first stumbling block was when I couldn't increase the canvas size on a photo that I'm restoring (9120w x 13298h). A chat session with Corel identified the issue as being a 10000 pixel limitation now being imposed. Although I can work with images >10000, I can't increase any dimension past this figure. Who had that brainwave? I had to put my image into PSPX2, increase the canvase size and then load it back into PSPX4 to continue.
Now today, another issue pops up. I can't seem to find other hits on pasting selections within the forum though, so I am raising this.
I loaded two tif images into my Edit workspace. One image is fairly small and I copied this, switched to the larger image and tried a 'paste as new selection'. This worked OK. The I switched to a paintbrush and made a small change to the main image. I then tried pasting the copied image again with 'paste as new selection'. This time the program locked up with Windows trying to find a resolution. PSPX4 then crashed. I have tried various scenario's to narrow the cause down. So far it seems that I can paste a new selection as many times as I want, but as soon as I use a paintbrush to effect even a small change PSPX4 locks up. It either then crashes, as explained earlier, or I get the round no operation mouse cursor displayed. At this point the main control box buttons (close, minimize etc.) won't respond, neither can I switch to the Manage or Adjust areas. The menu trees respond, but selecting File/Exit doesn't work. I have to use Task Manager to close the program.
I had installed SP1, but trying to identify the cause of this issue I uninstalled X4 and reinstalled the base version from CD (332). All settings were left to default. This is how I am running now, so it looks as if SP1 makes no difference. I have also tried using jpg instead of tif, but this also makes no difference. At the moment I'm thinking of ditching X4 and going back to X2.
I am running Windows 7 Ultimate 64 bit with 8Gb RAM.
View 1 Replies
View Related
Nov 18, 2011
I copied a file from my Card Program and then pasted it into X4. Besides the quality being shocking the end section of the image was pasted at the beginning, which I saw mentioned in another post.
But the same clipboard image pasted perfectly in PSPX and PSPX3, so the problem is not with the image nor with the Card Program.
Below is the image shown pasted in X, X3 and X4.
Has this been addressed and/or reported or is there a fix. This is extremely poor standards and obviously is from incorrect programming in X4. Not impressed.
Plainly clear one cannot have only X4 installed to work with as it still has many bugs that have not been rectified.
View 14 Replies
View Related
Jun 28, 2011
I am working with Paint-Net 3.5.8 and have a problem: I want to open two pictures and like to copy one detail of picture 1 into picture 2.
Sounds easy but isn't, probably because layers in involved ?
View 2 Replies
View Related
Sep 8, 2012
I've been using PSP since 7.
Now I'm using x4 and I noticed that when I cut/copy a portion of a pic and then paste it as a new image....then I want to copy and paste that portion back into the original photo using paste as new layer....the icon doesn't change automatically from the lasso/cut tool to the move tool.
It used to do that automatically in psp 7 so that right after I paste as new layer, i can move that portion around right away.
In x4, after you paste as new layer, you can't move that layer around because it hasn't changed automatically to the move tool. I have to manually click on the move tool everytime I want to move the layer around. It's very irritating!
Any settings I can change to make it automatically change to "move tool" right after pasting a pic as new layer?
View 14 Replies
View Related
Feb 21, 2013
I used to use PhotoBucket for editing but they "updated" which was a downgrade. All their previous editing abilities I was very used to using are gone. Professional looking frames included. This is not just placing a colorful line around the edge of a picture. It was making it look like there was a real frame around it. Though the option for a regular box or poster frame was there as well and you used to be able size them with a slider. Examples:
realistic frame (the one i'm most interested in getting)
poster frame
stacked several frames
fade frame at edges on picture
The first one is the one I am most in pursuit of. Maybe I should not have even shown the others they may be a distraction. I really want to be able to frame without copy and paste layering, mathing out resizing canvas, etc etc work work work, a real looking frame. Are there any pluggins for Paint.net like that? Note I've googled already and only found simple boxing in a pic plugs for Paint.net.
View 11 Replies
View Related
Aug 9, 2012
I'm trying to build a sprite image for a website based on a graphic that I created with Paint.NET.
The graphic has about 6 different layers.
To make the sprite image, I need the items in one layer to be duplicated in the exact same spots only shifted down by an integral number of the height. So, if the original image is 400px, I stretch the canvas out to 1200px. Now I want to copy each of the 6 layers and paste them exactly 400px down, then copy each of the 6 layers and paste them exactly 800px down.
I'm guessing there is a way to do something like this using the scripting ability of Paint.NET, but I have never used that feature before.
View 1 Replies
View Related
Jul 18, 2012
How do I cut a piece out of a photo from one part of the photo and paste it over a different part of the same photo, without it looking like I did so.
I tried a few of the youtube tutorials without any success.
View 1 Replies
View Related
Sep 19, 2013
I make sculpties in Second Life. They need textures and up to this point, I've been doing it by hand, pixel by pixel. Now I want to learn how "real-looking" textures are done by editing the texture maps.
How do I go about applying the beige marble texture on top of the black vase outline but not outside of the lines? It's ok and preferable if the texture is squeezed at the bottom to wrap around. and I'm trying to make it seamless, the marble square at the bottom actually covers the 4th vase side. (the top and bottom outlines are the outside and the right/left are the inside of the vase.)
View 3 Replies
View Related
