I'm trying to make a short video using images I draw on Paint.net. To make sure everything is consistent I adjusted the canvas size and I find I have to do this every time I open a new project. While I have no issue with resizing it again, I find it a bit annoying. How to preset the size of the canvas?
View 3 RepliesI have CS6 extended.
I need to pan and zoom over a still image to create a short video. I remember the process was to mark a track over the still, with points along this path that required time to transit and the degree of zoom. On playback, it was like a video.
Think of the still as a hillside shot with a road winding from top to bottom. The video captured a zoomed in frame of just the road. Eventually, at the bottom, the frame slowly zoomed out displaying most of the still. How do I do this?
I have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies View RelatedI'm trying to produce a 5 minute sports highlight video. It will be a mix of clips shot on my HDC-SD10 camcorder and clips pulled from a 1.5 hour game video on DVD. I am running Corel VideoStudio Pro X4.
Immediate challenge is importing clips from the game video on DVD. I don't want to download the entire game from the DVD just to pull 5 five-second clips. Unfortunately, entire game is one "chapter" on the DVD, so I can't just import a particular chapter. I've looked through the Corel manual, but can't find anything. How can I pull short clips from one long file?
I'm aware that you can create animated gifs using gimp.Is it possible to make a short movie using gimp? such as for youtube?
View 5 Replies View RelatedI seem to have a ( ongoing) or a series of problems trying to create a video from still Photos or a video that I take with my little Sony cyber shot camera. I believe that the entire problem is the file extensions. I get UDF,MOFF,MP4 to name a few.
MY Camera produces MP-4 photos I download them as such do I have to change or convert them? I tried to convert some to wmv but that did not work . I get a message that windows photo viewer may not be working and could need an update if that is needed where would I get that? I need to know what has to be done . I use corel video studio x5 and also corel paintshop pro x4.on windows 7.0.
Im using a tablet. I want to make my brush stoke very very short. Previously, I would do this by setting the fade to a very small number. I think I used to set it to airbrush but possibly it worked in brush as well. (I cant even figure out how to select an airbrush now) How do I do this in 6?
View 3 Replies View RelatedI'm using VSP X4 to make some short slideshows to be embedded in websites. I have been successful in creating them and converting into a WMV movie for broadband, 320 x 240 for fast loading on the website page.
All works well in terms of the slideshow presenting on the site page, but no matter how I size the container, or change the object code when converting, the slideshow always has a black bar at the top and the bottom of the slideshow. I've changed aspect ratios with no success in removing these black bars. I use CSS to create the container for the slideshow, and the container is coded for a white background, yet, the slideshow continues to have these black bars at the top and bottom. how I can remove these, assuming it's VSP4 that's creating them?
I just installed PSP X6 Ultimate 32 bit and the Perfectly Clear Plugin. It works really well part of the time but will often crash saying that Photoshop is not allowing enough memory. I'm using Windows 7 with more than 3 gb of memory. I also have Aftershot Pro running.
View 4 Replies View RelatedI'm working on a Mod for civilization 5, we're resurrecting a good mod of which the Modder stopped several months ago. The artist of the mod made some images for some policies, and I need to make the images in his style, I know how he made the background but which effect did he applied the first layer?
View 1 Replies View RelatedI use Silhoutte Plus to make Silhoutte out of png images, the result is jagged edges, pixelated outlines, which is really ugly, so I'm looking for a better silhoutte tool, kind of like Illustrator's ability to create a smooth outline for converted images for silhoutte.
View 2 Replies View RelatedFor a collage? I wanna make a 4 or 9 box grid with images within each. I saw a Youtube video where you could go to Effects > Render > grid-something.
Not seeing the Grid option there. Maybe Paint.net has taken it away since the video was made(?)
I have a question about the transparent background. I want to make the background of the following image(its a part of my image) transparent but when i use the magic stick the teal color is gone also.
Attached Thumbnails.
How to make a rotating gif, sliding through multiple images but couldn't seem to find anything. I know that this is a pretty simple task and used to be able to do it but have forgot in the long while I haven't got to use Paint.Net.
View 4 Replies View RelatedUsing PSPPX3 Ultimate.
The idea is probably a graphic design idea. I think PSPPX3 can do it though.
What I want to do is create something like a flyer or poster. So if it was physically I would have some poster board or a large sheet or paper, then I would arrange images and tape or glue them to it. Then scan and print off any copies if I needed them.
In software I think I want to be able to create a background and be able to enlarge it or shrink it down as I need to. Then start applying images and resize or reshape them on this "virtual canvas" or outside of the "virtual canvas" and bring them into the "virtual canvas".
Can this program do it, or do I need something like CorelDraw?
here is a video that I went a bit crazy with the layers! There are probably 100 PSD's in this.....
I am in the middle of making a similar video, however do not want it looking exactly the same. However I do want it to be genuinely chilling!
Is there any advice for images or different ways of presenting them, for my next video? I am thinking skulls!
The closer I got to the same look was to create a brush with the size of 1 pixel and 500% spacing, but it's still a bit slow to get even a small area looking like it's been sprayed. Plus, in the end my pattern looks too regular, not very natural. Here is part of the image whose look I'm trying to recreate (400% and 100%).
View 9 Replies View RelatedHow do I make my video 16x9?
View 1 Replies View RelatedI have created a presentation made of up an audio track adn lots of images, some video, text etc. I thought I put chapeters in and named them by inserting the green triangles in the timeline.
When I rendered to a DVD none of the chapters show up. How to get the Chapters to show up in DVD (or other vieo format)?
i cut out an airplane from one photo and try to superimpose that airplane on a video in adobe premiere
however, when i superimpose, the airplane is shown in white background. i dont need any background whatsoever. how do i make only the plane to appear on a video?
i tried to cut the aiplane and paste it on an alpha channel background
I was trying to make a .gif image out of a 4 second video. i though i was able to do this with 2.6 but i really don't recall.
View 2 Replies View RelatedI have our daughter's Nativity on my hard drive, and wanted to try some image screen capture so that our Playgroup can send a photo to our local newspaper. I have played the video, paused then performed a "Print Screen." I have then pasted that paused image into Xara PGDv7. But seem unable to resize the pasted image. If I try to resize the image, the resizing window just concentrated upon a portion of the pasted image. I thought this would have been straight forward, but it doesn't seem to have worked. Playgroup asked whether I could do this asap.
View 3 Replies View RelatedI'm using Photoshop CS6 to edit some video clips together, but it's super leggy. How do I make it so it's less leggy? Will putting my video files on an external harddrive work?
I'm using a MacBook Pro which is fast, but the video editor eats up my computer's speed like tiger.
I'm cs 3 user. I want to make a gifs using music video. But when I tried to import the video, it said 'could not complete the video frames to layers command because the movie file could not be open'.
My video format is FLV.. but when i tried with other format, same thing happen.
I can't seem to find any masks, or make a successful one myself in Paint Shop Pro, that creates a white photo border around a video, to make it look like a bordered photograph. All the edges I've made want to let the video show through the white border. How to do this? I just need a white border around a video to appear as if it's a photograph.
View 7 Replies View RelatedIs it possible to use Video Studio Pro X3 to make the edited video into a video file with menu and chapters like you have on a DVD but just on a video file instead ?
I have used Video Factory 2010 for making DVD's with navigation menus but I would like to make it into a file to use on my Mediaplayer instead of having to make a DVD and then ripp.
I've been searching and trying to see if there's a way that I can make my video right under 500mb, basically so I can have the best quality possible but still be under Vimeo's 500mb upload limit. It's not a long video, it's slightly under 2 minutes, but I've tried about 10 different export options and they're either around 100mb and the quality is awful, or they're gigantic files.
Is there a way that I can set it to close to 500mb? I'm using Video Studio Pro X5.
I found where I can make a video backdrop for a DVD menu, but the limit appears to be 30 seconds. This is not the case in other programs. Is there a workaround?
View 7 Replies View RelatedI have installed X6 and it runs fine. However the option: save as still image is not available any longer. How I can make an image from my video clip?
View 2 Replies View RelatedI've seen animations that were taken from music videos or movies but not the typical square or rectangular shape but asymmetrical etc. I've even seen an animation shaped like a cloud.
How the heck do I do that? I know how to make animations but how do I get them to be oddly shaped.
I am wondering if it is possible with an 3D autocad design to make a 'free roam' kind of walk through the design.
I know how to make a video clip on a set path, but lets just say you create a road and a couple of houses next to it i kinda want to walk over the road/sidewalk like it were a game.
Is that possible within the autodesk software range? Or do i need to transfer a design to an game engine and go from there?