Is there a way of distorting a selection to remove the 'keystone' effect which has made a rectangular page into a trapezium. (Photograped at a slight angle, I want it square for OCR.)
View 6 RepliesApplying the Oil Paint filter (CS6 Windows 7), I get a "halo" effect around certain common objects. Quite a few halos appear and they are not very natural looking. Click on image to get a better look.
View 5 Replies View RelatedI've got a photo - let's say of 800X600.
I want this photo to be 200X135, but I tried so hard and couldn't do that without distorting the image.
I have jpg images I want to appear like open book pages. I don't want just a corner turning along one edge but to have the image look like an open book page.
View 2 Replies View RelatedI've created a lisp that draws the boltholes of a pipe flanges, using the correct number of holes, at the correct diameter at the correct bolt-hole diameter and then rotates. Everything works seamlessly, when i do just one flange. But I've discovered that fewuently there will be mulitple times when a user will have to perform the command.
So the idea I had was to do the following:
Select all circles with (setq CirclesFirst (ssget "X" (list (cons 0 "CIRCLE"))))
Go through the code to create the new circles.
Select all circles with (setq Circles (ssget "X" (list (cons 0 "CIRCLE"))))
Remove selection set "CirclesFirst" from "Circles".
But what for some reason (command "_.select" Circles "R" CirclesFirst "") does not work.
I'm trying to make an outline of this keystone shape and cannot figure out how to do it. I want to either fill the shape with color or an image. I want to place text in front of it for a logo.
View 9 Replies View RelatedIs there a filter for keystone correction or another product I could pre-process my clips though for keystone correction?
View 4 Replies View RelatedAssuming the model space is active with a zoom extents, my question is:
I have 2 selection sets:
- ssA= The first one that contains all the entities (SelectAll).
- ssB= The second one that as been made using the SelectCrossingWindow method.
What I want is to remove the 2nd selection set from the first one: in other words, to get (ssA-ssB).
In VBA, I remember we had a Remove Items method, but it seems not in VB.NET. How to make this subtraction?
I repeat that ssB contains SelectedObjectByWindow...
I have a drawing that is 720X596 px and I have used the rectangular tool and select - invert, cut out a 222X444 px part that I need to save as a jpeg. However, I can not figure out how to either : delete the 720X596 drawing to leave the 222X444 drawing: or, select the 222X444 drawing to save it.
View 2 Replies View RelatedI have a Unwrap UVW modifier applied to an editable poly object. I used point to point seams to create the seams I wanted. There are a few seams I would like to change, how do I remove a certain selection of the seams that I want to remove?
AMD Phenom IIx4 945 3GHz || 8GB Ram || nVidia GeForce GTX660
Microsoft Windows 7 Home Premium - Service Pack 1 (64-bit)
Autodesk 3dsMax 2014 x64 - 16.0 SP2 student
I have been using autocad for a while and have always been able to use "R" to remove objects from a selection set. All of a sudden now when I want to use that command it activates the "Redraw" command instead of letting me remove objects from my set.
How to get it back to the way I had it before?
I was wondering if it's possible to remove a photoshop effect someone else put on a picture. For instance, completely blacking over a part or whiting out a section. Is the image behind the cover gone or can it be recovered?
View 2 Replies View RelatedJust a regular photo of a person on front and people and objects on the background. I tried different techniques but can't figure out how to make selection with all smallest details intact.
View 2 Replies View RelatedHow can I remove an object I just selected from a selection set? I can't find the setting that allows this. Is it some combination of items check under the selection modes in the options menu?
View 2 Replies View RelatedI have several NIK programs plus CS5 that I use as options to "Edit in" from LR3. I'd like to remove one of the NIK programs from my list.
View 4 Replies View RelatedI am using one of the premade text effect that fades-in two lines of text. I want this fadein to (1) last 3 seconds but the title, once fully into view, to (2) remain on the screen for 10 seconds. I just can't figure out this second part.
I can duplicate the original title so the two lines are positioned correctly after the effect ends but then the effect starts over again. I can't get the two lines in the exact same places by recreating them. And if I take a screen shot of the final frame, again, I can't get it positioned so the lines of text are in the exact correct place.
I presently have code that will select objects on screen based on particular stored object handles. The code then prompts the user to add additional selections once these handle selections are made. No problem. The problem lies with attempting to deselect the objects that were selected via object handles. I should say highlighted because that is what the present code is doing. It is highlighting the objects on screen. The code I am using follows:
Dim ids(1) As ObjectId ids(0) = ObjectIdFromHandle(myDocDB, "1D6") ids(1) = ObjectIdFromHandle(myDocDB, "1DE") Autodesk.AutoCAD.Internal.Utils.SelectObjects(ids) ' Get the Pickfirst selection
[Code]....
When I use the Fuzzy select tool or the select by colour tool, how can I remove the selection area around the parts that I don't want selected. For example. I have red car on a white background which I want to cut and paste to a black background. I select the white background, but although it selects all the white, it also selects other small areas on the car which are a similar colour. If the threshold is lowered too much when I use these select tools then I get a very small white border around the object when I paste it on to a dark surface. So instead of selecting using the default (15) or even less, I have to ramp it up so as the selection is closer to object and does not show the white jagged line. I thought that I could use the other selection tools with the "remove from selected" option selected, but each time I place a rectangle around the selected area that I want ot deselect, it does away with the entire selection area. I just cannot get it sussed.
View 4 Replies View RelatedI was wondering how do you take the camera phone effect on a picture. I've tried many times but it would come out really burnt looking or too bright and you can still see the little dots that the camera phone leaves. Anyone know how?
View 2 Replies View Relatedi want the text selections to be the rectangular and not the chamfers.
any possibility to edit in the registry.
How can I remove the shadow effect under the blue object? I am using Illustrator CS6.
View 2 Replies View RelatedI designed an image in Photoshop CS6 and brought it in After Effects I wanted to add rain then following CC drizzle effect so that the image I designed looks like the drizzle is hitting the character shoulders and arm area.
As I add the drizzle effect I have some areas around the charcter that the drizzle is also hitting how do I remove the unwanted drizzle effect areas ?I tried eraser tool but that did not work unless Im doing that wrong.
The last thing I'm having touble with, how do I get my audio sound effect ( rain sound ) to play at the same time as the rain fall effect and drizzle effect all at the same time?
i'm using my corelphoto paint x3 for a year now and it is working fyn then on one occassion i don't know but while editing an image, i suddenly discovered that my effect tools, paint tools, clone tools wont work or wont make changes on the image i'm editing... i've already checked the menus and settings but still no work..i also tried reinstalling the program but still it's all the same..
View 2 Replies View RelatedFor quite some time I've been trying to find the best way to remove a white background from images. I've checked out the sticky thread on this forum and as my image isn't of great quality and because it features quite a lot of white that won't apply.
Recently I found this tutorial which is supposed to work great (as seen in the comments). However, I think that because of a GIMP update that won't apply anymore somehow. I was hoping you guys might know what was causing it.
Everything works well until I get to step 7, where I have to select to Alpha. There it selects just the outlines, but my selection includes inner parts of the image, not just the background. And then after I invert and delete, the white that remains still has transparent parts that show up on the upper layer. So, am I doing something wrong with the Alpha to Selection, is that tutorial updated or is there a better way to remove the background from ie. a logo with just one background colour which isn't of great quality.
I have this image here and as you can see, I took a screenshot but all I want from this is the blue effect and none of the background contents. It's a single layer. Is there any way I can remove the back?
View 10 Replies View RelatedI am using Photoshop cs5 win version.
I often use Layer style - Stroke Effect, to get strokes, but If I apply the effect to a layer, the stroke is always feathered, antialiased. Do you know how to remove those antialiased, semi-transparent pixels?
I need all pixels to be 100% opacity, because it's much easier to edit, easier to select. I always use Threshold adjustment layer with white solid layer to get crisp, aliased stroke pixels, but It's a little bit time consuming, so If you know the faster, much efficient way
remove the background/textured images from these patterns?
(the first image has a globe shap that i want to remove and the second has a hand with pointed finger.)
I want to keep the pattern because it creates a transparent/glassy effect, but when i tried to flatten the image thourgh the layer menu it shows up white (with the shapes i want to remove) without the transparent effect.
There's a certain movie poster for Pink Floyd: The Wall. Here's that iconic image:I want an image of mine to look like the paint splatters like that. Attached is the regular image.
View 3 Replies View RelatedI'm trying to remove a white background from a logo image.
View 6 Replies View RelatedI'm seeing a lot of poster art these days online, and many of them have a really nice textured effect to the color fills. It's not your typical Photoshop filter, however.[URL]...
How is this done, do you think? A custom brush of some kind? Or load a selection and mask the color?I can't find the exact poster right now (that figures!) but sometime this texture looks almost like poor ink coverage, or a bad Zerox copy (low toner.)
i love the paint splatter in the background! I was wondering if there is a plugin or a brush that can supply that look.
View 1 Replies View Related