Every single time I move an image it filters, I have to copy the image to MSPaint and then copy it back to Paint.NET to make sure it isn't filtered, it's so annoying.
Is any way to stop the images from filtering?
Every time Corel comes up with a update, they change my default jpeg, bmp - all my pictures - to their new camera icon. How can I reset back to default settings? get Corel to stop this practice?
View 1 Replies View RelatedWhere do I tell PSPx4 not to give me this warning?
"Because of the limitations of the specified file format, the saved file will be limited to a merged image. Would you like to continue?"
I have been through the Preferences / Warnings & Auto Actions and can see no place to set it. I resolved it in PSPX2 but I can't remember how I did it. I have compared the 2 version's settings & can't see any difference.
So some of you may have used, are using or heard of the Fill from clipboard plugin. Is there any way that you can get it to change the size of the image within or stop it from being tiled? Tiled as in picture next to picture next to picture?
View 1 Replies View RelatedWhat I am trying to do is replicate Australian racecars onto 1:64th models.
I take photo's of a particular car & then try to create the decals using the images in Corel. I clean up the images/photo's & when ready downsize the images to basically 1:64th size (matchbox car size) but the image blurs when I downsize & can't use the image.
Is it possible to make the program to stop rounding when I try to set the image size? I'm putting in a size that is like 4.569 and it rounds it to 4.57 and I don't want it to round it.
View 2 Replies View RelatedYou probably know what Morphological filtering is. If you don't, here is an example:
[URL]
It basically filters any jaggies on a bitmap image. Is there any existing plugin for Paint.NET or are maybe there any plans for such thing? I'd need it to filter out some images made in MS Paint using simple lines. But they are very jaggy and using any other method didn't really give me any decent results.
In an image of a woman, I want to move her arm position by lowering it. How do I do that?
Attached Thumbnails
I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
I know this is basic I slect one layer for the image . When I use the rectangular selection tool on the layer and go to resize or move the selection with the move resize pixel tool instead of moving or resizing the selected area I get blank rectangle that moves or resizes. The selected area just stays the same.
View 2 Replies View RelatedI have a question that relates to a digital image that is of an old original B/W photograph.
The image is of an old, plain page of a book found by Police some 65 years ago, in it's orginal form the police had noticed what appeared to be indentations or very feint writing on this page and used graphite powder to highlight their findings and then went over the highlighted areas with what appears to be an early felt tip pen. This was then photographed and an image produced.
The intial image itself is quite small about 400 X 400 px.
It shows 5 lines of hand written characters with additional hand drawn lines.
Here is an example of a close up of the 'sharp end' of the two crossed lines in the centre of the page:
Here is that image reversed:
When I examined the image in more detail I noticed that the actual characters and lines were not simply black markings but in fact had various shades ranging from grey through to black within them.
I turned the image negative and it showed up what appeared to be smaller letters and numbers behind the initial blackened markings and lines. I have done some basic filtering and have managed to improve on the appearance but only a little.
The questions I have are these:
1. Are these real markings or are they some kind of digital noise? Most of the letters and lines on this page show signs of letters and words beneath the drawn over markings. (I have done a lot of research about micrography and such miniature writing does and did exist at the time and in fact has been around for 4000 years or more)
2. Is it possible for me to 'strip away' further layers of lighter coloured pixels to sharpen the markings that appear to lie beneath the overdrawn characters and lines?
3. This being so, what steps or processes can be used to achieve better clarity and hopefully a larger image.
I hope I got that right and it makes at least some sort of sense
I'm creating a drawing with multiple layers, but I keep dragging the background layer by accident. I've tried selecting the layer I want to move before dragging with the move tool, but this doesn't stop it. I've tried selecting the chain in the layers toolbox, but this just locks the layers into one group which gets dragged off the edge of the canvas. Is there any way to render the background stationary?
I'm using GIMP 2.8.0
UA problem.cdr
Sometimes when I try to copy and paste a logo, that has text around the outside of it, the text will move from its original location. How do I get this to stop? I have attached a file that is currently doing this.
I just got a new computer (Windows 7) and I don't like the default "Paint" program that comes with it. I've been using the Windows XP paint program for a long time and Paint.Net was the closest thing I could find to it.
I don't use Paint to edit photos or create super detailed artwork. I use it to draw little things (the image size is usually 50x50 or 100x100 pixels) and zooming in to 400%-800%. I've used paint.net a few times but I was wondering if there was a place in the program that would let me set preferences. It would just save a little time making it more convenient and less frustrating.
These are the things that I would like to change:
1: When moving a selected item it automatically leaves a "checker board" pattern on the image. It's relatively easy to fix with the "Paint Bucket" tool. Though if there was an option to make it only leave the default area white it would be a time saver.
2: When moving a selected item it will automatically replace the image beneath where you place it. In the Windows XP program there was an option to either replace an image or to replace all other colors except white (255green+255red+255green on the custom color spectrum). Is there an option like that in this program?
3: After moving a selected image (using the "rectangle select" tool then the "move selected pixels" tool) is it possible to simply de-select the selected image without having to click on the "rectangle select" tool and right clicking? In other words, being able to move an image, deselect the image, then automatically return the tool to "line" tool?
4: While using the "Line/Curve" tool the 4 click and drag points automatically appear on it to make it "curve-able" so is there a way to just leave it as a solid line without those 4 selectable points appearing?
5: Is there a way that I can make "Line Tool" my default cursor instead of pencil?
I've created my blend shapes and in the process of creating states for for the master button control. When i assign a state the slave mesh moves from it's position far off into the scene but the the state is applied to it. My question is how do i get the slave mesh to stop moving when i create a state and assigning it?
View 1 Replies View RelatedAfter I have edited a new batch of photos, I have found that the edits are now in a new folder dated today.
View 1 Replies View RelatedI am animating comps in After Effects CS6, and I'm quickly moving objects across the screen using positioning keyframes and changing size using scaling keyframes. Most of the time it works great; but sometimes the motion blur effect keeps appearing *after* the object has stopped moving. Not just for a second -- but forever. It appears correct when scrubbing on the timeline, but when I render the final output movie, a non-moving object sometimes has motion blur all over it.
Sometimes I can fix it by un-parenting some layers inside the comp... other times it doesn't fix it. Sometimes I just delete it and start over and it works. Seems more like a bug then something I'm doing wrong.
I also tried on my Mac Pro tower and Macbook Pro laptop in case it was a graphics card issue; it isn't, the exact same problem manifests itself in both areas. I did just discover that turning continuous raster OFF does seem to fix the problem--but then my vector images are blurry when I zoom in... and that again sounds more like a bug, not like an incorrect setting.
How do i stop the screen from moving when I drag something to the edge of the screen?
View 1 Replies View Relatedhow do I stop an image aligning itself to the edges of the image area.
View 2 Replies View RelatedHow to stop X6 downloading the help file and the User Guide PDF from the internet every time that I want to view these from inside X6?
All these files are installed on my PC so why does X6 insist on conecting to the internet for them? I know that if I disconect from the internet (but why should I Corel?) the help files load off my hard drive but if I click on Help/User Guide (PDF) I get "File not found".
I can't seem to get my scanner to stop scanning documents in PS Pro...I have a letter I wanted to scan and email but it gets attached to the email as a Jpeg and opens only with PS. Not good for the reciever. How do I set up PS so it is not the default for scanned items?
View 2 Replies View RelatedEvery time I double click on a bitmap in Corel Draw, it opens up Photo Paint. How can I disable this option? I never use it and its a waste of my time because it takes too long to load up! I don't know if my mouse has a problem, but sometimes I can just click once on a bitmap and it triggers the photo paint to open.
View 7 Replies View RelatedPhotoshop keeps recovering the same image over and over. How can I make it stop?I don't need the image. I already tried saving it to multiple locations.
View 2 Replies View RelatedWhen I try to use the hand to scroll an image around in the window in PS CS6, it keeps crushing the image down inside the window and letting it spring back to its original size when I let go. How do I stop it from doing this?
View 2 Replies View RelatedImage size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
I have a question. When I add .gif images into Paint.NET, they're not moving..
Now I'm wondering, is there a plug-in for Paint.NET to add .gif images and edit each frame?
For a while now I have been trying to find how to add moving .gifs into some of my paint.net works, yet whenever I try to find an answer the only thing that comes up is how to make a gif on paint.net which is not what I want. How to put gif into a paint.net piece of work or at least include a link to where I can find a tutorial.
View 4 Replies View RelatedI cannot find any way to switch off the auto-hide for the Render Image menu in Inventor Studio 2013. I know how to do it for other menus, and Bobvdd posted a registry hack a couple years ago for 2011. I cannot find anything for this dialog, and I would really like it to stop.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
i like my layout to look like this.
[URL]........
in particular i'm referring to the pallets on the right hand side. but whenever i put them like that, and close psp next time i open it it looks like this
[URL].........
so every time i launch psp, literally every time i have to move the pallets around. then sometimes, if i drag in a large image it does this:
[URL].........
Is there a way to move a selection without it becoming a floating selection in PSP X6 ?
Every time I select a part of the image and try to move it, it becomes a floating selection and then I have to go to the menu and defloat.
Is there a way in X6 to move parts of image without the float, defloat process ?
I am trying to trace a logo wich has a series of circles, I have copied the logo as a new layer and created the layer I am working with enough transparency to be able to copy.
after I draw the eclipse how do I select and position it witout moving the whole layer, also after I have drawn it can I select it and change the thicknes.