Lightroom :: Sharpening Not Retained In Library Module?

Dec 16, 2011

Recently after sharpening/editing a photo in the Develop module I returned to the Library module, only to see that the sharpening adjustements reversed. When I go back to view the image in "Develop" the sharpness returns. Not sure what I'm doing wrong here. All of the other photos I've adjusted in Develop retain all changes when toggling back to Library. This is using LR3.6 for MAC.

View 1 Replies


ADVERTISEMENT

Lightroom :: Sharpening In Develop Module Is Not Shown When Switching Back To Library Module

Feb 7, 2014

Sharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT".  With 1:1 there seams to be no issue. Export also looks fine in 1:1.    
 
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
 
I hope this is a way to get support from Adobe.

View 18 Replies View Related

Lightroom :: Why Does Sharpening Done In Develop Module Not Transfer To Library Or Exported Images

Oct 28, 2013

I've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?

View 9 Replies View Related

Lightroom :: Sharpening And Noise Defaults In Develop Module

Jun 15, 2013

Capture Sharpness
 
There are three distinct phases: Capture Sharpening, Creative Sharpening and Output sharpening
 
With regards to Capture Sharpening I’ve noticed that when I import a CR2 file into Lightroom 3.6 there is an Adobe pre-set in the Develop Module. Is this a form of Capture Sharpening default?
 
Sharpening
 
Amount: 25
Radius: 1.0
Detail: 25
 
Noise Reduction
 
Luminance: 0
Colour: 25
Detail: 50

View 10 Replies View Related

Lightroom :: Book Module Export To JPEG Does Not Apply Sharpening?

Aug 21, 2012

I'm running LR4.1 on Windows 7 64 bit with 5D MK ii raw images and just discovered the Book module 'Export Book to JPEG' produces files that do not have output sharpening applied.
 
Book = JPEG
Size = Standard Landscape
Cover = Hardcover Image Wrap
JPEG Quality = 90
File Resolution = 300 ppi
Sharpening = (Every setting produces the same results)
Media Type = (Every setting produces the same results)
 
When selecting 'Book = PDF' the sharpening is very obvious and is applied as expected based on the Sharpening setting:
 
Glossy Low = least sharpening
Matte High = most sharpening

View 4 Replies View Related

Lightroom :: Sharpening Does Not Want To Stick In Library Or Exporting?

Mar 17, 2014

In Lightroom, when editing the pictures, in the Developing Module, I will adjust the colors and sharpening and then I used the brush to add more sharpening to a face or an object. When going to the Library Module to inspect the pictures the sharpening is not there. Even when I export the pictures the sharpening goes away.
 
So I went to people who teach lightroom and they were stumped. and showed them when toggling back in Library and Developing modules and they would see a sharpen image in the developing module and then a non-sharpen image in the library and export picture.
 
I have asked this question here before and everyone was nice to explain to me their theories, but many believe it's my exporting, but it has nothing to do with my exporting, other than that it takes like an hour and plus minutes to export about a 120 pictures, which I know it is not correct, but that does not bother me more so the sharpening.
  
P.S. Do you think I should just purchase Lightroom 5. I am using Lightroom 4.4, which I got literally last year.

View 25 Replies View Related

Lightroom :: Images In Library Module Aren’t As Sharp Compared To Develop Module

Nov 28, 2013

For some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!

View 4 Replies View Related

Lightroom :: Error Message When Switching From Library Module To Slideshow Module?

Jan 26, 2013

I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.

View 1 Replies View Related

Lightroom :: Develop Module Changes Not Reflected In Library Module Or On Export

Sep 14, 2012

After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?

View 1 Replies View Related

Lightroom :: Sharpening Tool Is Not Working In Library Mode Or Export 4.4

Jan 27, 2014

I was editing phots when I suddenly realized that sharpening tool, neither the adjustment brush for sharpening or ordinary sharpening, would be shown in Library mode or when photos were exported. When I see the picture in Develop mode, they seem fine and I can adjust the sharpness as usual. So something goes wrong between Develop and Library mode.
 
I have Lightroom 4.4. The ISO level in the pictures are not high at all, so that is not the problem, as I have read some explanaitions of. When I see the picture in 1:1 in both modes, they look the same after sharpening. But if I zoom more, I can definately see big differences.

View 6 Replies View Related

Lightroom :: Missing Library Module Name?

Jul 8, 2013

For some inexplicable reason, on my LR 4, the word Library is not listed at the top of the home page where the other 6 module names are...Devleop, Map, etc.

View 5 Replies View Related

Lightroom :: How To Add Comments In Library Module

Feb 17, 2014

I am using LR 5.3 and in Library Module, below Metadata is a field for Comments. However, in that field, it says "Selected service does not support comments".

I can find no information on how to use this or how to 'legitimately' add comments to a photo.  I have seen where people suggest adding comments into unused Metadata fields but that seems like a crude work around.  What is the purpose of the "Comments" section in the Library Module?

View 6 Replies View Related

Lightroom :: Sharpness In Library Module

Mar 3, 2014

When processing a photograph in the Develope Module, once completed, I then return to the Library Module and notice that the same photograph is not as sharp as it was in the Develope Module. 

View 8 Replies View Related

Lightroom :: Missing Library Module Across Top

Aug 8, 2012

When I downloaded the LR4 upgrade, there is no Library Module next to Develop etc. across the top row.

View 2 Replies View Related

Lightroom :: 4 - Photos In Develop Module Are Different When In Library

Aug 14, 2012

When i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.

View 8 Replies View Related

Lightroom :: Image Selections In Library Module

Jun 13, 2013

I happened upon a rather odd glitch whilst using LR5 this evening, possibly related to the bug that's been discussed on here where images selected in grid view in a publish collection don't correspond to the selections indicated in the film-strip. However, it's not quite the same thing...
 
I noticed that the display under the histogram had a rectangle with a '2' next to it. I had no idea what that represented (just getting used to some of the LR5 changes) and had to consult the PDF to find out. It in fact indicated that I apparently had two images currently selected, both of which were original images with no smart-previews. Fair enough (not using smart-previews), expect that I only had one image selected, not two. I repeatedly tried deselecting all images (ctrl-d), but as soon as I re-selected one image, the '2' symbol re-appeared. Switching modules/view/moving between various collections and 'all photographs' failed ot prevent this - it was stuck on telling me I had two images selected no matter what.

View 5 Replies View Related

Lightroom :: How Does Library Module Switch Images Around

Aug 25, 2012

For no reason I can think of, sometimes the photo I see is different from the one that should be there. The correct one shows up in Develop, but I don't understand why Library shows a different one. Sometimes all the images in a folder get shifted over by one, or sometimes one is a duplicate view of another. And then for no reason it seems to resolve. But meanwhile I'm afraid to export the catalog to copy on another computer for fear that I'm exporting incorrect data.

View 5 Replies View Related

Lightroom :: Why Is 5.3 Library Module Too Slow To Be Productive

Jan 4, 2014

6 seconds to select three images in the grid?  I've done all the things recommended by the FAQ's for optimizing Lightroom's performance.  My PC setup as reported by Lightroom is below.  My catalogue contains fewer than 30,000 images.  I don't use stacks.  I don't automatically write to XMP.  I'm running LIghtroom alone on a freshly started Windows 8 session.  All my other software runs fine.  Version 4 seemed to run fine. 

Lightroom version: 5.3 [938183]
Operating system: Windows 8 Business Edition
Version: 6.2 [9200]
Application architecture: x64
System architecture: x64
Logical processor count: 4
Processor speed: 3.4 GHz
Built-in memory: 8078.3 MB
Real memory available to Lightroom: 8078.3 MB
Real memory used by Lightroom: 919.9 MB (11.3%)
Virtual memory used by Lightroom: 881.8 MB
Memory cache size: 1074.5 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1680x1050, 2) 1280x1024
 
Installed Plugins:

1) Behance
2) Canon Tether Plugin
3) Facebook
4) Find Duplicates 2
5) Flickr
6) jf PicasaWeb
7) Leica Tether Plugin
8) Nikon Tether Plugin
 
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: Intel(R) HD Graphics 4600

View 1 Replies View Related

Lightroom :: Renamed Folders Won't Appear In Library Module?

Aug 21, 2012

I attended Matt's Kozlowski's LR4 seminar a few months ago. He talked about not using dates to organize your folders but instead use a meaningful description.
 
So at the time of IMPORT, I add the metadata, keywords and rename the folder to something meaningful. He said the folders cold still be found by date.
 
So.....on a recent trip to NEW HAMPSHIRE, i did some work, imported files into LR and renamed the files at import into my PICTURES directory on my laptop.
 
Now that I am home I am exporting as a catalogue but only the dates and not the names I gave at IMPORT for the folders appear in the library module.
 
DOI now have to go back at the destination and rename all the folders
 
I must be missing something.
 
I want to transfer all this work to my main computer but I will just be going back to bad habits using dates to name files.

View 9 Replies View Related

Lightroom :: How To Locate Folders In The Library Module

Sep 19, 2013

How do I locate my folders in the Library Module? All that is showing is the "Navigator", Catolog, and "Collections". 

View 1 Replies View Related

Lightroom :: 4 Library Module Applying Random Changes?

Jan 24, 2014

I have been using LR for a while and randomly started having an odd problem. After importing some images I was flipping through them in the Library Module and the loading animation was coming up across the bottom. After the loading animation stops, the colours willsaturate or the exposure will change slightly. If I go to the develop module, the history only includes the import and no sliders have been repositioned. Please check out the before/after pictures for clarification (hard to notice but the table cloth changes hue and saturation). I have default settings on quick develop, so it's not that.

View 1 Replies View Related

Lightroom :: Collections Missing From The Library Module In 4?

Feb 27, 2013

My collections have dissapeared from the Library module lathough they are visible in the Develpo module.  How do I get them to show in the Library module?

View 2 Replies View Related

Lightroom :: Filter Search In The Library Module

Nov 26, 2013

When I do a filter search in the library module, the quantities are no longer appearing at the right side of the columns.  They used to, but not in the past few days. I can not find where to fix this...

View 2 Replies View Related

Lightroom :: Library And Develop Module Photos Appear Different

Apr 21, 2013

I am using Lightroom 4.4   Dell Ultrasharp monitor is calibrated.  I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers.  I recently took some photos of my daughters prom.  She had on a beautiful reddish orange dress.  I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module.  The change is very noticeable between the modules.  The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad.  It also appears the same when exported to a JPEG file.
 
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile.  It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module.  I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
 
I have also noticed that the dress looks more orange when Soft Proofing is enabled.  The change happens immediately when the check box is enabled.  Checking the box makes the photo appear similar to the Library module view.  Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning.  I am intending to place the photos on the web at this time via Flickr.  I will be printing several later so will be worrying about the printer gamut at that time.  But for now, I would like to get the photos on the web looking as intended.

View 4 Replies View Related

Lightroom :: How To Delete Images From Library Module

Dec 29, 2012

Is there a way to delete images from the Lightroom Library module and also have it delete the corresponding file in the backup folder?

View 2 Replies View Related

Lightroom :: Jerky Panning In Library Module

Jun 12, 2013

Just installed Lightroom 5.In the Library module while panning a zoomed in image the movement is very jerky. This only happens on the second and subsequent images opened. The first image after launching Lightroom is fine.

View 1 Replies View Related

Lightroom :: Colour Shift Between Develop Module And Library

Jan 25, 2012

I'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed  a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?

View 1 Replies View Related

Lightroom :: Selecting Images In Library Module For A Slideshow

Aug 29, 2013

When selecting images in Library module for a slideshow, the right pane switched to a muddy yellow color. 

After minimizing the LR5 window, the muddy yellow box remained on the desktop.  Could this be a LR5 glitch/bug?

View 1 Replies View Related

Lightroom :: Library Module - Quick Develop Panel

Jan 12, 2012

I was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module.  Certainly sliders instead of those arrow buttons would be a very useful change.
 
Why this wasn't changed?

View 1 Replies View Related

Lightroom :: 3 - How To Move Photos To Different Folder In Library Module

Mar 2, 2012

Trying to move some photos to a different folder in the Library Module. I highlite the photos, click on the folder I want to move them to and press "Move Selected Photos to this Folder." Then I get an error message that the photos are already in the destination. OK. 1 Problem I just made the folder. My computer crashed about 3 weeks ago. Got it back up and reinstalled LR3.

Made 2 catalogs;

1. Personal and
2. Work Photos.

All of my personal photos I put in the personal cat with no sub-folders, my work went into the work which I made sub-folders. Today I finally got the time to set up my Personal folder. Made 3 new folders, one was Vietnam, which I divided into sub-folders of the place I was stationed and my R&R to Hawaii. Started separating the photos, all went well till I tried to move photos to a sub-folder call Phu Loi. Then I got the error message.

View 5 Replies View Related

Lightroom :: 5d Mark II Images Not Same In Develop And Library Module

Mar 2, 2012

I am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
 
I am using LR 2.7 and Camera Raw 5.7.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved