when connecting a Fuji FinePix SL1000 to LR 5.3, I cant see the preview pics of the .raf files. So it's quite hard to figure out which ones have already been imported or are not worth to be imported. When I connect my EOS 6D I can see the Thumbnails of the .cr2 files. Is there anything that needs to be configured in order to show the previews?
View 2 RepliesI just upgraded to LR 5 and when i import files for a Fuji X100S it just hangs and hangs. I have to kill LR and restart. Files for my canon 5d mkii are no problem, import easily. Is there a patch or an update I am missing? i have version 5.3
View 2 Replies View RelatedI just unpacked my x-pro1 w/ 35mm lens. I am still reading through the manual and trying to learn the ins and out of this amazing camera. I set up the unit to take raw + L-jpg files. When I tried to import them from the card into LR the program didn't see the files. So I then copied the files to a folder on the desktop and tried again w/ no luck. I finally split the raw files from the jpgs put them in seperate folders and was able to import the jpgs into lightroom. I am storing the raw files in a safe and sound place until Adobe writes the code for the x-pro-1 raw files then I will import them on mass.
View 4 Replies View RelatedLR has stopped importing my Nikon d600 raw files, first says no preview available then when I click import it says not supported. I have upgraded to ver 4.4 but still have the same problem.
View 1 Replies View RelatedI'm using Lightroom 5.3, Camera Raw 8.3. Yesterday, I was able to import Fujifilm X-E2 files into Lr 5.3. But today (01.01.2014) I get the error message that the files cannot be read.
View 2 Replies View RelatedI've just purchased lightroom 5 and I'm having problems importing my files. I first detected the problem with my CR2 files.
After investigating I found this person with the exact same issue: [URL] ....managed to fix the problem by changing the prefrence file as indicated here: Preference and other file locations in Lightroom 5
Now I'm trying to import my RAF files (Fuji x100) and I'm getting the exact same issue.
I'm on OSX latest version... 4.4 still will not import Fuji X100S .raf files?
View 1 Replies View RelatedOn my MAC LR4 doesn't import .RAF files. It says "because they couldn't be read".
On my PC everything is OK. What can I do about it?
Will there be an upgrade for Lightroom 3 or Lightroom 4 to allow direct processing of RAW files from FUJI PRO X-1 camera ?
View 1 Replies View RelatedI have a student who is unable to import her .RAF files into LR5, or view them in Bridge (or even in finder for that matter). She is able to open them in PS6 as RAW, but that's it. I've checked for LR5 updates but it says it's up to date. What else could I try?
View 3 Replies View RelatedHow can i get adobe to recognize my Fuji Finepix S1 RAW files, Fuji Support tech says it uses same processor as the Fuji Finepix SL1000 that is supported, unless there is another work around that lets adobe products see my raw files from my Fuji Finepix S1
View 2 Replies View RelatedI wish there were camera calibration presets that matched the in camera jpeg settings for Fuji files like there is for Nikon. (They mimic the classic Fuji films.)
View 3 Replies View RelatedWhen I tried to export several (say 15) Fuji X-Trans files at the same time, I got a "Not Enough Memory" Error. This problem only occurred after after upgrading to Lightroom 4.4. I can now only export a few (3-5) X-Trans files at the same time.
I am using Windows 7 32-bit with 4GB memory, SSD System drive, and Radeon 7700 Graphics card. For Virtual memory, I set "no paging file" on C drive and "system managed size" on another SSD drive.
I have a Fuji X-e1 and the latest update of LR 4.4 running on 10.6.8, 16GB RAM, all OS software up to date.
The problem is my Fuji RAW files don't show the correct lens profile in the Develop module. The only choice available to choose is for Fuji X100 (which I've never owned or shot). The metadata in the Library module is correct for both the lens and camera, and also shows correctly in Bridge.
However, with the same software on a friend's Macbook Pro -- also 10.6.8, LR 4.4, etc. -- the lens profile correctly allows for the X-e1 and 18mm lens auto-correction.
I uninstalled LR on the desktop using an uninstaller called Zap It, downloaded 4.4, reinstalled and still the same 'error'.
Importing ceases during the rendering preview process at image 2 of set. Same if using SD or Flash Cards, small or large import. No problems using Bridge so reader is operational.
View 4 Replies View RelatedHow do I use Fuji RAF (raw) files? What file do I need to download for my Photoshop CS5?
View 3 Replies View RelatedElements 10 will not read Fuji raw files, will elements 11 or 12 fulfil this function?
View 3 Replies View RelatedWill my Fuji X-E1 raf files open in the camera raw of Elements 11 ?
View 2 Replies View RelatedAfter I updated to 3.6 I could no longer preview the pictures on the card or camera regardless of the format. Prior to 3.6 I had no problem.. I did not change ,y preferences but I checked them to be sure and can see nothing that deals with this.
View 3 Replies View RelatedI have a Fuji XE-1 camera and was pleased to see that this camera is listed as supported in ACR 7.4. However when I installed ACR 7.4 I cold not find the profile for my Fuji XE-1 in either Lightrrom 4 (or 5 Beta) or Photoshop CS6. I can find a profile for my old camera a Fuji X100 but not the new one.. I also use the standard Kit lens with this camera, the 18-55mm OIS F2.8-4 lens and it is not lsted either. Am I doing something wrong as I look for it under camera profiles. Is their a way to load them into ACR from an external website or are they "baked into" ACR 7.4?
I am using an iMac withg the latest version of Photoshop CS6, Lightroom 4 and OSX 10.8.3
Very large DNG files from the new X100S camera?
I am importing raw files from the X100S, converting them to DNG files, and they come out at around 55Mbytes per picture. When the quicker startup info and the Raw file is included in the DNG file, the size goes up to around 70Mbytes.
Specific environment: OS X latest version 10.8.4, iMac about 3yrs old.
I keep hearing conflicting reports about how Lightroom handles lens corrections for the Fuji X100s. Some say you need to use the X100 profile while others say that Lightroom applies the corrections automatically, behind the scenes, based on info embedded in the raw file itself and that selecting the X100 profile would only "double up" on the corrections. Others have said that there is no X100s profile yet but NOT to use the X100 profile because it might make things worse since the sensor has changed and the new X-Trans sensor and lens combination would likely need different corrections than the old one.
View 36 Replies View RelatedWith the release of 4.2 now supporting Fuji X-E1, does this update fixes Fuji X-Pro 1 raw files?
View 14 Replies View RelatedEach time I import a batch of RAF files, they import ok into the library, but then one by one they each 'burn out' exposure-wise'
Have I set a preference that would do this on import?
Virtually all of my DNGs from the last four years do not display properly when previewed in OSX's Finder or opened in the Preview app. Everything in Lightroom works just fine. I note that the "linear" option is off (seems to be the default) when I import from the SDHC card to LR. I have LR "Copy as DNG" and I apply nothing other than a renaming of the file (filename.date.dng).
I've dumped the files in Library/Quicklook but that doesn't do anything.
All the importing has been done with the latest version of ACR (Camera Raw 7.1 is the latest I have).
When I use Quicklook (spacebar) in the Finder or open the file using Apple's Preview app, all I see is a large black rectangle sometimes with some "noise" appearing in the frame. Yet LR has no trouble and I can export as jpeg or tiff without any issue.
I'm running 10.8.4 fully updated. I've dumped all the caches and cleaned everything using Onyx and restarted. Still not working.
The only thing I've noticed is my older DNGs (which came from a Fuji S9100) are 12-bit (and I -can- see those files in Finder preview and the Preview app!) whereas the newer DNGs (from 2009 and newer) which were shot with my S100fs are 14-bit. All the newer DNGs have the problem.
I've uploaded one of the "problem" images: [URL]
I have a Canon Rebel XS 1000D that I have been recently shooting RAW images with. However, when I go to import the .cr2 files into LR, it says that it does not recognize the format.
View 6 Replies View RelatedI am shooting raw (D800), importing with import settings set as none or zeroed and when they open in LR the image is clearly processed (as if it was auto toned or something) where is the flat raw image i deserve?
View 3 Replies View RelatedI upgraded to LR3.6 today for LR3. Now Lightroom cannot read any files I try to import. I tried re-installing. Would it be safe to overwrite 3.6 with 3.0?
View 7 Replies View RelatedI started editing a session on my laptop using LR3. I now want to move them to my desktop and edit them on LR4. (I know I need to make them the same version, but alas...) When I try to import them, they are greyed out and no allowing me to import. I saved them as dng files on a flash drive to move them over.
View 2 Replies View RelatedI have setup multiple folders for each year under Pictures in Windows 7. Have recently had to restore Lightroom and upgrade to ver 4.0.Problem is when try to import new photo, the photos go to subfolder I specify, but the tag/label in Lightroom goes some other place under pictures not the sub folder.
View 17 Replies View RelatedI am using Lightroom 5.2 on a Mac with Fusion Drive and always have issues importing DNG files into Lightroom. Any potential causes for this? I see the white bar showing it is importing but it never finishes and I end up having to close lightroom and try again. The images are stored on my desktop.
View 2 Replies View Related