Lightroom :: Fuji X-Pro 1 Raw File Processing Updated In 4.2?
Oct 3, 2012With the release of 4.2 now supporting Fuji X-E1, does this update fixes Fuji X-Pro 1 raw files?
View 14 Replies
ADVERTISEMENT
Lightroom :: How To Allow Direct Processing Of RAW Files From FUJI PRO X - 1 Camera
May 29, 2012Will there be an upgrade for Lightroom 3 or Lightroom 4 to allow direct processing of RAW files from FUJI PRO X-1 camera ?
View 1 Replies View RelatedLightroom :: Raw File Size Fuji X100S In 4.4 On OS X?
Apr 5, 2013Very large DNG files from the new X100S camera?
I am importing raw files from the X100S, converting them to DNG files, and they come out at around 55Mbytes per picture. When the quicker startup info and the Raw file is included in the DNG file, the size goes up to around 70Mbytes.
Specific environment: OS X latest version 10.8.4, iMac about 3yrs old.
Lightroom :: Metadata File Needs To Be Updated Without Stopping?
Aug 19, 2013I'm always getting "metadata file needs to be updated" notification for two TIFF files, not for others. I'm saving them to the disk, after two seconds they are giving the same notification ... I'm not touching my hands even to the keyboard ...
View 2 Replies View RelatedLightroom :: Processed Raw File As DNG - Will Processing Go With Export As DNG File
Jan 16, 20141- How do I move files from one folder to another with LR3?
2- If I export the processed raw file as a DNG will the processing go with the export as DNG file?
Lightroom :: Canon 7D Raw File Processing
Dec 15, 2011Has LR3.6 addressed the poor processing of 7D raw files ?
View 5 Replies View RelatedLightroom :: Update Date Time Digitized To Match An Updated Capture Time For A DNG File?
Mar 25, 2013I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View RelatedLightroom :: How To Import Fuji X-E2 Files In 5.3
Jan 1, 2014I'm using Lightroom 5.3, Camera Raw 8.3. Yesterday, I was able to import Fujifilm X-E2 files into Lr 5.3. But today (01.01.2014) I get the error message that the files cannot be read.
View 2 Replies View RelatedPhotoshop :: Can't Find Fuji XE-1 Profile In CS6 Or Lightroom With ACR 7.4
May 27, 2013I have a Fuji XE-1 camera and was pleased to see that this camera is listed as supported in ACR 7.4. However when I installed ACR 7.4 I cold not find the profile for my Fuji XE-1 in either Lightrrom 4 (or 5 Beta) or Photoshop CS6. I can find a profile for my old camera a Fuji X100 but not the new one.. I also use the standard Kit lens with this camera, the 18-55mm OIS F2.8-4 lens and it is not lsted either. Am I doing something wrong as I look for it under camera profiles. Is their a way to load them into ACR from an external website or are they "baked into" ACR 7.4?
I am using an iMac withg the latest version of Photoshop CS6, Lightroom 4 and OSX 10.8.3
Lightroom :: How To Import RAF Files (Fuji X100)
Dec 11, 2013I've just purchased lightroom 5 and I'm having problems importing my files. I first detected the problem with my CR2 files.
After investigating I found this person with the exact same issue: [URL] ....managed to fix the problem by changing the prefrence file as indicated here: Preference and other file locations in Lightroom 5
Now I'm trying to import my RAF files (Fuji x100) and I'm getting the exact same issue.
Lightroom :: 4.4 Still Will Not Import Fuji X100S RAF Files?
Apr 21, 2013I'm on OSX latest version... 4.4 still will not import Fuji X100S .raf files?
View 1 Replies View RelatedLightroom :: Fuji X100s Lens Corrections In 5?
Sep 2, 2013I keep hearing conflicting reports about how Lightroom handles lens corrections for the Fuji X100s. Some say you need to use the X100 profile while others say that Lightroom applies the corrections automatically, behind the scenes, based on info embedded in the raw file itself and that selecting the X100 profile would only "double up" on the corrections. Others have said that there is no X100s profile yet but NOT to use the X100 profile because it might make things worse since the sensor has changed and the new X-Trans sensor and lens combination would likely need different corrections than the old one.
View 36 Replies View RelatedLightroom :: Importing Pics From Fuji X-pro1?
May 5, 2012I just unpacked my x-pro1 w/ 35mm lens. I am still reading through the manual and trying to learn the ins and out of this amazing camera. I set up the unit to take raw + L-jpg files. When I tried to import them from the card into LR the program didn't see the files. So I then copied the files to a folder on the desktop and tried again w/ no luck. I finally split the raw files from the jpgs put them in seperate folders and was able to import the jpgs into lightroom. I am storing the raw files in a safe and sound place until Adobe writes the code for the x-pro-1 raw files then I will import them on mass.
View 4 Replies View RelatedLightroom :: 3 - Fuji RAF Images Burning Out On Import?
Feb 21, 2012Each time I import a batch of RAF files, they import ok into the library, but then one by one they each 'burn out' exposure-wise'
Have I set a preference that would do this on import?
Lightroom :: No Preview Of RAW Files When Importing From A Fuji SL1000
Mar 12, 2014when connecting a Fuji FinePix SL1000 to LR 5.3, I cant see the preview pics of the .raf files. So it's quite hard to figure out which ones have already been imported or are not worth to be imported. When I connect my EOS 6D I can see the Thumbnails of the .cr2 files. Is there anything that needs to be configured in order to show the previews?
View 2 Replies View RelatedLightroom :: 4 Doesn't Import RAF Files From Fuji X100 On Mac
Mar 9, 2012On my MAC LR4 doesn't import .RAF files. It says "because they couldn't be read".
On my PC everything is OK. What can I do about it?
Lightroom :: Fuji FinePix HS30 EXR - RAF Files Won't Import Into LR5
Sep 12, 2013I have a student who is unable to import her .RAF files into LR5, or view them in Bridge (or even in finder for that matter). She is able to open them in PS6 as RAW, but that's it. I've checked for LR5 updates but it says it's up to date. What else could I try?
View 3 Replies View RelatedLightroom :: Fuji F770 EXR RAW Support Wrong Rendering
Jan 9, 2013I have just bough a Fuji F770 EXR camera. I took few pictures in RAW + JPG and RAW onluy mode in low light.Some part of the RAW (RAF) file rendering show completely desaturated areas using the Rendering 2012 and 2010.Ex: a green shirt and an orange shoes appear grey.
This does not happen if I set LR to use the 2002 engine. Of Course this engine shows less details and more color noise.Is there any way I can send the sample RAF file so that an engineer so that he can have a look at it?
Lightroom :: How To Get Adobe To Recognize Fuji Finepix S1 RAW Files
Apr 1, 2014How can i get adobe to recognize my Fuji Finepix S1 RAW files, Fuji Support tech says it uses same processor as the Fuji Finepix SL1000 that is supported, unless there is another work around that lets adobe products see my raw files from my Fuji Finepix S1
View 2 Replies View RelatedLightroom :: Approximate Date In Which Fuji Xt-1 Camera Will Be Compatible
Mar 17, 2014You know the approximate date in which Fujifilm Xt-1 camera will be compatible with lightroom?
View 2 Replies View RelatedLightroom :: Why Is There No Camera Calibration Options For Fuji Files
May 11, 2012I wish there were camera calibration presets that matched the in camera jpeg settings for Fuji files like there is for Nikon. (They mimic the classic Fuji films.)
View 3 Replies View RelatedLightroom :: Why Does LR Install When Importing Fuji X100s Files
Mar 6, 2014I just upgraded to LR 5 and when i import files for a Fuji X100S it just hangs and hangs. I have to kill LR and restart. Files for my canon 5d mkii are no problem, import easily. Is there a patch or an update I am missing? i have version 5.3
View 2 Replies View RelatedLightroom :: Export Several Fuji X-Trans Files Got - Not Enough Memory Error
Apr 8, 2013When I tried to export several (say 15) Fuji X-Trans files at the same time, I got a "Not Enough Memory" Error. This problem only occurred after after upgrading to Lightroom 4.4. I can now only export a few (3-5) X-Trans files at the same time.
I am using Windows 7 32-bit with 4GB memory, SSD System drive, and Radeon 7700 Graphics card. For Virtual memory, I set "no paging file" on C drive and "system managed size" on another SSD drive.
Lightroom :: 4.4 Update Doesn't Show Fuji X Pro 1 Camera For Lens Adjustments?
Apr 10, 2013Looking forward to this update because i use a Fuji X pro 1 and I had read that lightroom 4.4 now supports this camera and sensor.
However after updating all I get in the Lens adjustment under Fuji is the Fuji x100 which has been their for some time.The exif info is showing the correct camera and lens used etc.
I have tried uninstalling and then manually removing any left over files and folders with no luck.
Do i have to install support for this camera as an addon?
Also if i look in the lightroom folder Camera profiles/camera it only lists Canon, Nikon and Sony
Lightroom :: Fuji RAW Files Don't Show Correct Lens Profile In Develop Module
Apr 7, 2013I have a Fuji X-e1 and the latest update of LR 4.4 running on 10.6.8, 16GB RAM, all OS software up to date.
The problem is my Fuji RAW files don't show the correct lens profile in the Develop module. The only choice available to choose is for Fuji X100 (which I've never owned or shot). The metadata in the Library module is correct for both the lens and camera, and also shows correctly in Bridge.
However, with the same software on a friend's Macbook Pro -- also 10.6.8, LR 4.4, etc. -- the lens profile correctly allows for the X-e1 and 18mm lens auto-correction.
I uninstalled LR on the desktop using an uninstaller called Zap It, downloaded 4.4, reinstalled and still the same 'error'.
Photoshop :: Bridge: File Not Updated Correctly
Aug 23, 2006Anyone seen this problem? real hassle, and says may effect searches.
View 3 Replies View RelatedAutoCAD Civil 3D :: Updated XRef File Paths?
Mar 7, 2012We recently updated our servers and with that the path to all of our drawings. For example what was once located at W:FilesAutoCAD is now located at W:CorporateAutoCADDrawings. The problem is every time we open an old drawing for the first time we must redirect all of the xrefs to the new location. My question is, is there any way to do this automatically for all drawings when they are opened? Is there a way to tell the software to replace "FilesAutoCAD " with "CorporateAutoCADDrawings"? I'm sure others have encountered this dilemma.
View 9 Replies View RelatedLightroom :: Updated To 4.3 - Can Uninstall 4.0
Jan 28, 2013I updated from Lightroom 4.0 to 4.3. Can I uninstall the 4.0 without affecting the new 4.3 version?
View 1 Replies View RelatedLightroom :: Updated To 4.4 And Cannot Find Presets?
May 11, 2013Downloaded 4.0 presets fine. Updated to 4.4 and cannot find presets.
View 15 Replies View RelatedLightroom :: 4 - Smart Collection Not Updated
Apr 18, 2012I just created a smart collection to take images from a shoot, all of which have a keyword something like
20120403 Sample shoot name
and give me all images from this shoot with 4 or 5 stars. I defined the smart collection with keyword-starting-with that string and rating at least 4. I got all but two of the images. I looked and there was no bug - two images were missing the keyword. When I corrected this, in LR 3 I was accustomed to the dynamic collection's immediate update. However, now in LR 4 (Win 7), the collection didn't update. I tried switching views in Library, such as to the shoot itself, but the collection didn't update. I closed LR and reopened it, and the collection was now updated with all images that should be in it. This appears to be a bug to me.
Lightroom :: Updated To 4.3 And D600 NEF Still Not Working
Dec 18, 2012I updated to 4.3 today and I was still unable to import my D600 NEF/RAW files. After I updated, I rebooted and it seemed like I could actually import the D600 NEF files. However a few moments later, somehow those images were no longer in my catalog/library and when I try to reimport them again it says the files are not compatible and no preview was available during the import screen.
Win 7, 64-bit
