Okay, I'm new to Lightroom so be gentle. The problem I have is I have about a dozen folders on an external hard drive with files in them that I want to import to Lightroom (I'm on a Mac OS X). I had previously gone through and put color labels on all of the files but when I import them into Lightroom the color label does not translate. Is there anyway to include the color label and have it translate to Lightroom's color labeling?
View 1 Replies
I've just started to use color labels and I noticed that in grid view some show up as a pale color and some show up as a darker color even when set to the same label color. I can't find a rhyme or reason to this. Why this happens?
View 4 Replies View RelatedIs it possible to add additional color labels? The existing ones are a bit... primary. It would be useful to include other (well, secondary) colors as well. Also, black/gray/white would be nice.
Can I add them myself somehow, or do we need to fall onto our knees and cry out to Adobe? I hope not.
Using Lightroom 4.3 atm, considering an upgrade to 5.0. If this were a 5.0 feature, I'll consider it a selling point
I want to go through my photos and identify them so I can easily find them later. I tried using both flags and color labels.
1. Is there any reason for using one vs. the other? Are there any sorting advantages, etc.?
2. After changing the color label for lots of images, is there an easy way to remove the color labels for all of them?.
In Lr 4.1 I have just noticed that as well as red, green, yellow, blue & purple, there is a "Custom" field too. How can I configure this, and is there a shortcut I can assign (and also for purple; how do Adobe keep skipping over assigning a shortcut to Purple!!??)
View 4 Replies View RelatedI started using a mac laptop in the field and always used windows pc at home. A portable hard drive holds the lightroom catalog. It's fat32 formatted so it can be used by both mac and windows.
A catalog made by the mac lightroom opens fine in windows. However, all the color labels are lost. The flags and stars are retained.
If a color label is changed on a photo by the windows version of lightroom, then when that catalog is opened on the mac, that photo has no color label. (even though the mac originally gave it a color label)
And all the original color labels that were made by the mac magically return as they were assigned.
To trouble shoot this, I installed the Lightroom 3.6 trial on 2 other pcs - one runs windows 7 32 bit and the other windows 7 64 bit. These installs see the mac created catalog properly.
All the color labels are there and changing one on a windows box is properly reflected on the mac when that catalog is opened.
This is so annoying.My main pc must have an allergy to my mac. I removed and reinstalled lightroom on my pc-same problem. Now i have to figure out what is interfering with my main pc lightroom install.
It cant be lightroom cause i removed it and reinstalled it. but it might be one of the plug ins i use. these magically reappearred even after i reinstalled lightroom after removing it.
Is there a way to create more color labels than just the ones that LR defaults to? Here's my use so you'll know what I'm trying to do. I use a different color for the "model" photo of a particular insect family. This allows me to search using this color and use the photos as my "easy cheat sheet" for making IDs. Since there are more than 5 insect families, I need more color options.
View 2 Replies View Relatedi run lightroom 4 last version 64bit ,w7 64bit.
can i assign words to color labels like bridge ?
in bridge ->preference->labels-> i can set for example for red "good for print"
can i do in lightroom ?i can not find the way to do it?
For example, if I would like to change the default green and purple color labels to orange and pink?
View 2 Replies View Relatedi always wondered.... is there a reason why color lables are only stored in the catalog and not in the files xmp fields?
View 6 Replies View RelatedMy Lr4 calalog has all my color labels but when upgrading that calalog to Lr5 - all color labels on images are stripped and I see the label default (Red - Delete, etc)
I went into the Roaming - Adobe - Lightroom folder and found "Label Sets" but I fear what is in there is the Lr5 stuff
Question: How can I get all my Lr5 catalog images to have the same color labels as my Lr4 catalog?
How to change the keyboard shortcuts for applying Color Labels to photos? I have Keyboard Tamer, and I was able to remove the shortcuts for applying star ratings, but there seems to be no way to change the commands in Photo > Set Color Label.
See, many times a day I will click the white balance color temperature fileld and start typing "5500" only to then realize that the click on the entry field didn't activate it and I have now inadvertently changed the ratings and/or label colors for several photos. Super frustrating to then have to undo a bunch of times, especially when I'm viewing based on rating and/or color label, because photos can spontaneously vanish from view.
I used to mark images yellow in LR if I needed to do further work on them in Photoshop. Once exported as jpegs, I'd open them in Bridge and sort for color labels. In the last year or so, Bridge stopped seeing those labels. It doesn't work in CS4 or CS6.
View 6 Replies View RelatedI currently have my LR 4 libriaries and catalogs on a external drive that i can transport between my laptop and office mac. The only issue I am having is when I color label photos on one computer it does not show up on the other computer. Is there a preference for this? It is the only thing I can't figure out and is frustrating after rating them on one computer and then not having them later on the other.
View 1 Replies View RelatedI work with a Sandisk 32g card connected to a Sandisk Card reader.I work on a MacBookPro.I have the latest Lightroom 4.1I start importing from within LR. So, FILE - IMPORT PHOTOS AND VIDEO And then I import on my external hard drive.The thing that buggles my mind : At a certain point in the import, LR changes the color tempretaure of some some files !So, the first 63 first images imported are at the right temperature and then, all the rest is wrong. I went and open the CF files on the FINDER, and all the files are at the accurate color temperature on the card itself.
View 9 Replies View RelatedWhy does Lightroom convert black and white to color when importing? How can I get it back in orginal form without the automatic conversion?
View 4 Replies View RelatedI followed the steps I found online to create color-specific surface labels (I assigned red to the cut elev and green for the fill elev.), but when I display them using the spot elevation on grid, I am getting both red and green elevations on same point (they are both fill elev or cut elev.), and why are there two elevations (cut-red and fill green) displaying?
View 9 Replies View RelatedHow to choose “no color” for the line extending between the contours labels?
I labeled the contour lines but sounds that it draws a line between them. Is there a way to hide this line to give it “no color” to have a better presentation for the entire map?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Suppose you have an existing structure that you are going to tie into with a proposed pipe.
We label existing structures with smaller text and a different color (as opposed to proposed labels)
Is there any way to label the structure where the one single proposed pipe text is a larger text size with a different color, as shown here?
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I was pleased for the first time ever to see some yellow labels created in Bridge retained after an import into LR.
But before I got too happy, I then noticed (and this is why I'm writing), that the red labels I created in Bridge are not there only the yellow ones.
Anything I can do to have LR show all the colors?
LR 5.0
I've just installed LR4 and imported my catalog from LR3. All have imported OK apart from the fact that I had my pictures colour labeled and these don't show in LR4. The labels show in Bridge so they are still there but don't show in Lightroom.
View 4 Replies View RelatedA long time ago, when I was using Photoshop Elements I found a plug-in that made it possible to work with stacks as a unit.
If I labeled the top image in the stack that label was applied to all the images in the stack; then when I sorted the images, the stack remained in tact; instead of just the top image, with the label showing up. I could also label the top image in a stack with flaga and, for example quickly delete all the image with an "X". Otherwise is seems the only option is to open each stack, by Ctrl-clicking the number in the upper left corner, that opens the stack; with all the images selected, then click the star labels I want to apply to all the images in the stack.
I just merged two catalogs from my work laptop and my home desktop.
One has this folder structure:
YY/MM/DD
One has this:
YY/YY-MM-DD
I'd like to get them together into one unified YY/MM/DD set of folders, preserving labels and collections from both catalogs.
If I delete images out of the catalog and re-import (to get LR to automagically move/create folders) I lose labels and collections.
If I export as catalog then import as catalog (to keep labels) the folder structure doesn't change.
Creating folders manually in the finder or Lightroom would take foooorever. Is there a way to get Lightroom to move everything into the structure I want, keeping labels, etc?
I have this issue that I cannot upgrade to service pack 3, itried instaling it but it just comes up with this error message
View 14 Replies View RelatedI have created an image (a replica of our company logo) in Photoshop.
The image contains a vibrant blue to darker blue gradient as the background.
This displays correctly in Photoshop, and will print correctly from there.
However, when I try and use the image in another application (for example InDesign, the image is displayed as a faded blue colour.
Attached are 2 files, which are:
ps.jpg - a screenshot of the file in Photoshop
id.jpg - a screenshot of the file in InDesign
How can i print contactsheets with labels, flags, stars.... in the print? I 'm working on a collection of + 7.000 files and i need a printed catalog of all the files with all the selection marks on the file.
Working with LR 4 on mac
I'm a hobbyist photographer with lots of personal photos and some I might use for work related projects. I'm just getting started with LR and want to make sure I start right.
1. What metadata fields should I consider using that may be useful in the future? None of my images currently have metadata applied.
2. Will star ratings and labels from Bridge show up in LR?
For no apparent reason I can no longer add ratings/picks/colour labels to my pictures through either shortcuts or the menu. The only way I can add ratings is by clicking on the ratings dots when I have the grid extras turned on.
View 2 Replies View RelatedI have a large list of custom colors in Excel that has the color name and CMYK breakdown of each color. I'm looking for a way to import this information to create a custom Color Swatch Library. That will have the name of the color and the CMYK breakdown. So that I can easily use in Illustrator and Photoshop. Is there any way or application in doing this with out manually entering the information and creating a new library?
View 7 Replies View Related
