I had to reinstall LR4. How do I locate and load previous raw edits? Here's what I've tried:
Under the Library Module, right click on "All Photographs" under CatalogsClick on "Import From Another Catalog"Found my old Lightroom Catalog and added it.This brought in a few thousand images, but not what I was specifically looking for
I've been using the same computer for 7 years and have had many and struggles reinstalling the operating system and all my software from time to time. Today, the struggle is with reinstalling Photoshop CS4.
- I just installed Windows XP Professional with Service Pack 3.
- I reinstalled Photoshop CS4 but every time at launch it says: ...
I had a computer crash and burn. My hard drive was ok, I have a new computer and have rearranged all my photos on the new hard drive. I need to start fresh with Lightroom but when I reinstall the software it auto loads the catalogs. I have about 7000 photos and its a big job but I have to do it. Can I reload Lightroom and not the catalogs?
Also, If I delete all metadata and previews associated with my pictures will this also delete all editing of my photos or will that just get rid of the Catalogs?
Until last week I had no problems importing, playing or editing Canon 60D RAW or MOV videos in Lightroom 5. Since then, ever time I tried to import MOV videos LR5 crashed and needed to be restared - but is now 'permanently' crashed (see below). I tried the following to overcome the issue, without success: Unistalled and reinstalled LR 5Updated video card driverInstalled QuicktimeOS (Win 8 Pro, 64 bit) up-to-dateUpdated monitor driver. My last attempt to overcome the issue involved disabling all LR5 plug-ins. I then tried to import a video file to see if that fixed the problem. LR5 again crashed, but this time it it appears to have crashed 'permanently' because when I try to reload LR 5 it gets as far as the LR screen, tries to load 'previous import' into 'Library' and then immediately crashes, i.e. I can't get into LR at all to try any other possible 'fixes'. I am now totally locked out of LR 5 because even after uninstalling and reinstalling LR it continues to crash immediately when I try to open it.
Other info that may assist resolving the problem includes: The video files that can't be imported seem OK - I can play them through Windows Media Player and Quicktime.DivX not installed. Installed a new video card (Gigabyte GT610) and installed the latest driver from the Gigabyte website. I don't know if it's coincidental, but the new video card and monitor were installed before the problem arose. CPU is an i5 - 3550, 8Gb RAM (+-5Gb available), LR5 stored on 120Gb SSD with 8.3Gb free, photo/video files stored on a 680Gb HD partition with 55Gb free.
I went to startup LR5.2 (local) and it all of a sudden did not get past the splash screen. It hung with a "Not Responding" in the title bar. I went to a backup file and the program seemed to operate normally. I did another backup to make sure I saved a good catalog. Today the same thing happened. I again went back to the backup and that did not seem to work. I have tried a number of things including deleting all of the preview files and upgrading to version 5.3.
Up until the other day LR5.2 was operating without any problems. One more thing. I finally got it to work by deleteling all of the preview files and going back to my backup. It starts up and seems to be ok; however, when I close the program and try to re-start .. it again does not get beyond the splash screen.
I have subscribed to the CC version of PS + LR but I am only using PS - have not downloaded LR5 for CC.
I did increase the RAW space to 30 Gig and there is 119 Gig of space on the hard drive. I use an i5 processor and run the 64 bit version of LR.
I was trying to put together a slideshow in the Trial Version of Lightroom 1.0(on WindowsXP SP2) and I clicked on the Soundtrack section to add music. When the browse for music dialog came up it only showed drives below my H: drive. I keep my music on my M: drive and could not add music to the slideshow. I tried sharing my M: Drive and mapping it to my F: drive, but when I selected it I got "The folder F: cannot be used, please try another folder." This is a severe limitation.
I was planning on purchasing this version, but it looks like it is not quite ready yet. Maybe I will wait for 2.0. I was also not able to stack photos or change the folder that I import to from the downloader.
I accidentally deleted my backup file from the folder that light room created in my folder. I have it backed up in my Time Machine but I can't find a way to ask light room to look at it again. I can put it back in to its place but light room isn't seeing it or I just can't figure out away to ask light room to see it again.
View 7 Replies View RelatedI've just had to re-install Lr4 - with serial numbers etc - because of a switch to Windows 8. It has however created a new (empty) catalog, whereas I still want to use the existing one with all of my edits on it. Do I now have to work with two separate catalog, or can I somehow move everything to this one? Obviously I don't work with catalog much.
View 5 Replies View RelatedI have a finished JPG and I am trying to re-create the settings I used in another image. Unfortunately, I didn't save the settings in a preset. Is there a way I can have Lightroom compare the original RAW/JPG with the final JPG and extract settings from that?
View 6 Replies View RelatedWith the Adobe CC upon us, I'm am questioning staying with Adobe proprietary DNG (proprietary in the fact it has edits embedded that only Adobe products understand) and PSD files long term.
I have never used Lightroom. But am a heavy Photoshop/ACR user. I have many ACR edited DNG files and multi-layered Photoshop files.I want access to my files in the future (including edits) without having to always have the monthly CC subscription (in the future).
Question: Can Lightroom (not a CC product currrently and hopefully not in the future) open & understand the edits (cropping, color balance, lens correction, ...) I've already done to my many DNG files in Adobe Camera Raw?
Even if I use the CC in the near future and eventually not subscribe, I want future access to my DNG and PSD format files, including all the edits).if Adobe guaranteed a free PSD & DNG viewer (understand the layers, edits, ...) and give the ability (for all time) to export to a flattened image with edits applied to TIFF!
After high lighting several photos, clik on rotate ( see there is no load on the CPU only a very small one in the middle) only the highlighted photo will rotate NONE of the others will not even over time do they respond. same in Libary mode as well
NOTE - why is "auto sync" showing as an option in libary mode?... is that not only availible in Develop mode? after i reset ( see below on the update) sync meta data is NOW shown as the option...
There are not the little 3 dots on the selected photos, showing that it is "working on the edits"
I cleared raw cache, reset all develop presets, restored all local adjustment presets, changed Catalog settings to preview quality to medum ( down from high) Previews size unchanged at 1440 pixels
lr4.2 clean new install, upgraded to lr4.3rc, upgraded to lightroom 4.3 all versions were 64bit.
I edit my images for the most part in LR4 then export as a raw file into a new folder. Then when I view the images in bridge my edits don't show up. Do I have to convert to JPEG for my edits to stick?
View 3 Replies View RelatedI use Lightroom 4 and when I went in to look at some images I had recently edited, (all my images are large jpegs, and I "add" my photos to LR) they all started to change to some weird high contrast edit right before my eyes, one by one without me touching or changing anything. They also had a little exclamation point on them. When I clicked on the exclamation it says "the metadata was changed by Lightroom and another application" and I could "import settings from the disk or overwrite the disk settings." When I clicked import settings it reverted back to my original edit. But this didn't last.. after a few minutes they kept changing back to this other random edit.
I read online that I should save the metadata so it can't be changed, so I highlighted every image I have in Lightroom and saved the metadata. (this took about an hour for Lightroom to do) But now when I go back into Lightroom to look at my photos they do something different.. now they start to revert back to the original UNEDITED files all my themselves, one by one! I have already exported all the edited photos into folders so I have them. But what do I do!? If I ever want to go back to an edited photo and export it at a different size or retouch it or something, none of the edits are saved, I have to start from scratch! I'm a wedding photographer and I'm scared to load more images and work on them just for LR to change them back
Love the new basic editing sliders. But, finding when I "edit in > PS > edit with LR adjustments", the image in PS is NOT the same as in LR. It's "darker", the histogram isn't transferring properly.
View 3 Replies View RelatedI went to pull an image for a vendor. I added a few to the quick collection. Fine right? Now when I look through the master files in the hierarchy, ALL of the edits are lost, including color labels, starring, flagging, etc. The only images that were not affected are any duplicates that I converted to black and white.I swear I did not change a thing with the catalog or moving files on disk etc. Can I import from an older backup of a catalog to restore my edits?
View 3 Replies View RelatedWhen I edit in Photoshop CS6, then SAVE, then CLOSE, it isn't in lightroom, stacked or un-stacked. I've reinstalled both LR4, PS-CS6, and ACR.
I can eventually track them dow, they are in the folder, but I have to import them before I see them!
It doesn't matter if I process as TIFF or PSD.
Last night I made some adjustments to a shoot which I did using Lightroom presets. I synced the rest of the images so they were all the same before opening them from Lightroom into Photoshop for further editting. I unfortunately removed all the images from Lightroom but I still have the psd files which were opened in Photoshop. Unfortunately i discovered this morning that I have missed a couple of images and try as I might I have been unable to replicate the same use of presets I used last night. Is there anyway for me to tell from the psd files what presets I used so I can edit the ones I missed in the same way?
View 1 Replies View RelatedI have the plugins for Nik HDR Pro in my Lightroom 4 on my Mac (OS X 10.6). When I save the file with the changes and return to Lightoom, the changes I made are not there. I have had the same problem with a filter on my Olympus E5 which emulates an HDR effect - the effects are not visible when downloaded to Lightroom.
View 3 Replies View RelatedI have been doing many edits in LR5 and I am losing something along the way...this is what I have been doing....
The image is edited in LR5 (exposure,blacks,whites etc) The image is edited in Photoshop (spot heal)...(copy with lightroom edits) Edits made in Photoshop are saved back to lightroom (not sure saving method here?) Final product is exported from LR5 to email (sRGB /JPEG)
The blacks in the image look VERY different once emailed from the Mac Computer. When viewing on the IPAD, Laptop, Mobile devices these images dont look exactly the same prior to being sent via email.
I notice a rather strange behaviour in Lightroom 4.3 in the Develop module: it appears that the Develop preview ("zoom to fit" setting, I guess that's what 99% of people are using when using the global adjustments) is only updated when moving the mouse pointer AWAY from the slider that controls the adjustment (it doesn't matter if it's Clarity, or Highlights, Shadows, whatever).
I happen to often click somewhere on the sliders range, say somewhere in the middle between 0 and +100, to get an idea what a Clarity ~50 might look like. If I keep the mouse pointer hovering over the knob, the Develop preview will look pixelized/blocky, and not update to a more refined preview.
Only if I move the mouse pointer AWAY, the preview will be updated. It's as if the rendering is delayed until you're really sure you want that setting, perhaps to improve responsiveness/performance? This didn't happen in LR 4.2.
I tried this with a NEW catalog and only imported something like 100 photos to it, and no plugins - the behavior stays the same. I uninstalled the latest AMD/Catalyst graphics driver and let Windows 7 (64bit) "fall back" to a default driver - again, behavior stays the same.
Did a bunch of edits to some photos in a particlular folder. Went to another folder and did the same. When I went back to the original folder, all the last edits I did were gone.
And, LR5 Develop Module is way slower than 4.
Recently upgraded to Lightroom 5. Now when I publish photos, those photos are the originals, without any of the edits that were made in Develop (such as crop, color, etc.). The tags are being published and updated, but that's all. This is happening for both publish to hard drive as well as online services.
View 2 Replies View RelatedI have two big issues with syncing edits between my iMac (computer A) and Macbook Pro (computer B). My workflow has been as follows:
Import photo shoot onto computer A as DNG into master catalog. Do some edits. Export all DNGs as "Original" from shoot to desktop and copy over to computer B. Import shoot folder in master catalog on computer B, edits are held. Finish editing the entire shoot on B and export folder as a catalog without exporting the DNG files. Back on computer A, import to shoot folder from another catalog to sync edits and metadata changes.
My issues:
1. When edits actually do sync back on A, everything syncs EXCEPT for virtual copies, they are no where to be found. Even when exporting from B as a catalog, the dialogue box says "79 virtual copies to be exported." They just never show up back on computer A.
2. Biggest issue. On computer A, I work in one master catalog. Some shoot folders are still on the internal hard drive while most are housed on a Drobo. It seems the reason why edits will never sync back (changes arent found when importing from another catalog) is because LR4 is only looking on the INTERNAL disk of computer A. The import seems to not look for the photos that are housed on the Drobo. I think this because whenever I try to import back to A, LR4 tries to create a new folder in the catalog on the internal disk. The below screenshot shows what I mean. 0512-SpeedyFamily is the shoot Im editing between A & B, but LR4 tries to import them back onto the internal disk (upper portion of folders) and created the ?2012 folder.
I am running LR 4.2 on both machines, just havent installed the latest update yet.
I have a folder in Lightroom 3.6 that I edited after I had already moved to LR 4. All of my actual image files are on an external hard drive. The folder of edits in question is not in my LR 4 catalog. What is the best way to move that folder with all the edits and virtual copies from 3.6 to 4 and then link the edits to the images on the external drive?
View 4 Replies View RelatedI know how to "edit in" Photoshop... but, ever since my upgrade to LR4, the file transfers un-edited. In LR3 it would transfer with the LR adjustments.
View 4 Replies View RelatedI recently copied all Lightroom folders/catalog /etc to a larger hard drive. Upon opening Lightroom for the first time since the move, almost all of the edits made in Photoshop and/or 3rd Party programs are gone and with them the ratings for those photos. Where are these photos/ratings stored and are they retrievable. Again, I copied ALL folders and catalog to the new drive.
View 4 Replies View RelatedI have a PC, I've tried to safe my NEF/RAW files with the edits and it will only save either unedited photo's or jPegs. I choose export and a file to export to. WHen I open the folder the photo's are all unedited.
View 1 Replies View RelatedI imoprted raws into LR 4. Edited them, exported them as JPGS to a designated folder w/ different name on the desktop. Went back into the original Edit folder and it was empty. This was a backup folder (wheew..) so I have it on another drive/ the original work. Question: LR 4 doesn't move or alter the originals, yes? So where are they? This wasn't an issue in LR 2 or 3..
View 3 Replies View RelatedA friend recently backed up her LR catalog in new external drive but failed to back up her photos as well.Now when she tries to restore her photos with "restore catalog" she shows all broken links...(?)..Is there any way to restore her photos with associated edits..Just wondering if they still exist anywhere on her hard drive.
View 1 Replies View RelatedI just purchased Lightroom 5.2 and am trying to edit without success. In the Develop panel, I can see and use any of the edit adjustments/sliders on the right. The edits are visible in the small photo in the filmstrip area at the bottom of the page but no changes occur to the main screen image as they are applied. Behavior is the same regardless of file type (.jpg or .NEF).
The photos will accept edits in the Library panel (quick edits) and apply/display them to the main screen image.
Everything was working fine and then this morning everytime I export my edited photos, it just exports the orginal and not the edits. I also noticed the watermark check box is grayed out, so I can't check it.
View 1 Replies View Related