I imoprted raws into LR 4. Edited them, exported them as JPGS to a designated folder w/ different name on the desktop. Went back into the original Edit folder and it was empty. This was a backup folder (wheew..) so I have it on another drive/ the original work. Question: LR 4 doesn't move or alter the originals, yes? So where are they? This wasn't an issue in LR 2 or 3..
View 3 RepliesI'm not sure if this is the result of a recent update, but when I send a file to PS for editing and save, it is no longer stacked with the original RAW file.
Previously, I would hit CMD+E, a tiff file would open in PS and after saving itnthe new file would appear in LR, stacked with the original.
I have a folder in Lightroom 3.6 that I edited after I had already moved to LR 4. All of my actual image files are on an external hard drive. The folder of edits in question is not in my LR 4 catalog. What is the best way to move that folder with all the edits and virtual copies from 3.6 to 4 and then link the edits to the images on the external drive?
View 4 Replies View RelatedAfter I have edited a new batch of photos, I have found that the edits are now in a new folder dated today.
View 1 Replies View RelatedWindows 7, LIghtroom 4.4 - when exporting files all works fine when I set the output location to be the same folder as original. If I select 'Specific Folder' then press 'Choose' LR then Lightroom stops working. I've upgraded to LR 5.3 but the same thing happens.
View 1 Replies View RelatedI have a preset that allows me to export my photo to a subfolder of the original folder. In my case it's simply called jpg export. This allows me to do all my edits when the shot is in it's original "Date taken" folder and all my edited shots from that folder show up in the jpg export folder when I run the preset. My issue is that the jpg shows up in BOTH the original folder and the jpg export folder. I know it's operator error but what's wrong with my settings? Under Export Location I have Export To: Same folder as original photo (this is the reason for my problem but I am not sure what to change it to) Put in Subfolder: is checked and the folder is called jpg export. Add to This Catalog: is also checked.
View 5 Replies View RelatedAfter I edit photos in an external editor, my photo is moved from its original location in the folder, to a different one. The photo stays within the same folder but is moved to a new location within it. This is really annoying as I have a couple thousand photos from a trip to Europe I have been going through, and after my external editor closes and I am returned to LR, I have to find the photo which has been moved to some random spot so I can put it back to where it originally was. I want to keep my photos organized by location, so it really sucks when my photos from Turkey end up with my photos from Hungary. How I can stop this???
View 5 Replies View RelatedHow do I export all the photos I imported back to their original folder just as they were, they haven't been modified, adjusted etc. I imported them by mistake.
View 6 Replies View RelatedIn LR, my photos are stored in folders named by date. Ex : 20120913
Sometimes, I run over photos that are not where they belong. Ex : a picture from 2010-01-01 misplaced in the 20110720 folder.
I am sure there are quite a few misplaced pictures in my catalog.
Is there any easy way to find them and move them where they belong ?
I am travelling to the UK and wish to export my photograph collection as a catalogue to my laptop (without the original photos) and work on organising them, deleting unwanted photos, etc and then reimport the catalogue on my return. My question is this - if I delete a photo whilst on my laptop, on reimport into my main computer will lightroom then go and delete this photograph from my original collection as I hope it will do?
View 2 Replies View RelatedI just noticed that some of my photos are missing from the library in lightroom, specifically the original versions of photos that have virtual copies edited in photoshop in folders that have since been synchronized. Weird, and very anoying. The files are still there (in wondows explorer) but when I try to re-import them lightroom doesn't see them, only the PS edited copies (.tif files). I told lightroom to allow duplicates and it sees all the photos in the folder except those missing ones. This does not happen to my PS edited virtual copies in folders that have not been synchronized. It is not a matter of stacking, or at least Lightroom does not think the PS copies are stacked at all so I can't unstack them. How to get them back into lightroom (preferably with the accompanying development settings) and also how to avoid this problem in the future.
PS: I import files from my camcorder using a different program because lightroom does not acknowledge that particular video file format. That's why I have to synchronize some folders and not others.
When I edit a photo in Photoshop from Lightroom 4 and save it back to Lightroom, the photo ends up somewhere else in the folder than it's original location. This is a hassle as my folders can have hundreds of photos. Is there a setting that will place the file back to where it came from?
View 4 Replies View RelatedInstalled Elements 12, converted catalog but now my sub folders are shown as main folders in Organizer folder view. How can I get back my original folder/sub folder system? When I look at Windows folders my system is as it was so the two don't match any more. On searching further came across more info on Community-powered support for Photoshop Family and it seems Adobe have removed the option of sub folders.
View 4 Replies View RelatedHow can I save files to their original folder. And YES I have checked " Save As to Original Folder" in the Preferences.
View 3 Replies View RelatedI've been asked to work with a blogger who until now has accepted images to their size uncompressed of resized. We've got around the problem of the max image size by using the plugin Insanity. Which has done a great job however what it doesn't do is re sample the images for the web.
Usually if I blog myself, I always save for web but I'm having real trouble, real real trouble creating an action that will save for web to the original folders instead of a separate one.
The thing is that there are so so many images in so many different folders and sub folders these must be modified and replaced ready for re upload.
Example: I have original files structure like:
FOLDER 1:
1.jpg
2.jpg
3.jpg
FOLDER 2:
1.jpg
2.jpg
3.jpg
The goal is to create edited (resized black/white) COPY of each file in each folder without resaving original file. So it must look like:
FOLDER 1:
1.jpg
1 copy.jpg
2.jpg
2 copy.jpg
3.jpg
3 copy.jpg
Folder 2:
1.jpg
1 copy.jpg
2.jpg
2 copy.jpg
3.jpg
3 copy.jpg
-- I can write without problems Action for each special folder, but it take too many time to make 1000 Actions like 1000 folders I have. The problem is in SAVE AS command wich I use in Action. It remembers folder witch was used while recording. Then if I try "Override SAVE AS" option in the Batch window I get edited original files without creatig copies.
I can choose destination NONE, SAVE AND CLOSE, FOLDER. Simply, what I need is SAVE AS COPY AND CLOSE.
I want to resize pictures but still have a copy of the original kept in the folder. I am used to Microsoft "Picture it" which has a duplicate feature.
View 1 Replies View RelatedAt random moments when I'm saving layered Photoshop CS5 files, a message pops up with the following text: Could not save "...FileName..." because the file is locked or you do not have the necessary access privileges. Use the 'Properties' command in the Windows Explorer to unlock the file.
Well the strange thing is that I'm the administrator, the only user of this PC and even when I set/check the properties of the folder containing the files this continues to happen. What is even more disturbing is that I have to save my file as a new file in a new location and when I check the original file, it is no longer in it's original folder.
I save all my files to the local HD and I use an external device to backup my files. I regularly get notices on my backup device telling me that various files were deleted, but will be kept until I need the room. These are files which I did not delete, they are files which I'm still working on.
I'm having to save to the original job folder first, save to the desktop when I get the notice saying I can't save, and then save back into the original folder when I can't save on the desktop anymore because of the same error message. I sometimes get a similar Adobe error message which is basically along the same lines, but I haven't noted the exact text yet.
I no longer run my back up continuously while I'm working because while it's great to have the peace of mind that I'm regularly backed up, my files can get up to 2GB in size and I think the backup running at the same time is slowing Photoshop processes down, so I most often pause it until I take a break. On this occasion, I had been running it while working (smaller file) and so I was able to retrieve an earlier version from my backup which saved me from having to re-do the job completely. I didn't get this problem when I was using CS5 on Vista, it's been since I've been using Windows7 and my back up drive.
I only recall having had this problem with PSDs, but that could just be because these files can take up to ten hours to complete and there's a higher chance of getting an error message over a longer period of time.
I'll disconnect my back up drive while I'm working and see how it goes. It's not ideal, but probably worth a try.I don't know if there's a connection, but occasionally windows randomly sticks a lock on zipped folders which I create, regardless of the permissions I apply to the upper level folder they sit in. I'm told by a friend that it won't affect other people accessing these zipped folders from other machines. I don't know if that's the case, I always change the zipped folder's permission to include 'Users' and that makes the lock disappear.
DELL XPS 730X
Total amount of system memory 6.00 GB RAM
System type 64-bit operating system
Number of processor cores 4
[code]...
I have an action which applies Levels and Curves to my black and white TIFFs. At the end it "saves as" a JPEG. Originally it saved them at quality level 10 but I re-recorded the action to set the quality at 12. However, since this change the action keeps saving as into the folder where the image I used for the re-recording was located.
View 1 Replies View RelatedI have a finished JPG and I am trying to re-create the settings I used in another image. Unfortunately, I didn't save the settings in a preset. Is there a way I can have Lightroom compare the original RAW/JPG with the final JPG and extract settings from that?
View 6 Replies View RelatedWhen importing something off of a DVD or CD how do I direct Lightroom to copy the imported images or folder to a specific folder on my hard drive? It seems to default to MyCatalog but leaves the location on the CD rather than copying it to the drive. If I remove the CD the images is reported as missing.
When I go to the top of the screen for importing I can change the source but the location info on the right is not active or changeable.I am new to lightroom and coming from Photoshop Elements background.
I have another question about installing LR5. How do I manage to install the program to a special folder and not the custom folder on drive c:?
I just run the installation through application manager. I set the installation folder within my presets to d:adobe...
But anyway it was installed on hard drive c:
A direct download of the installer from adobe is not possible unfortunately.
I was in the process of moving a folder inside or LR. I might have clicked and moved it twice since it was very slow. LR wasn't able to complete the move and gave me an error message. After I clicked "OK" on the error message, I wasn't able to find my folder/images from the old or new location. I did a spotlight search on my mac, but I wasn't able to find them anywhere. Where has my folder/images gone? I tried to locate them without any success.
View 2 Replies View RelatedI've got about 10,000 photos that I've moved in lightroom by creating a folder called 'pictures' on the external drive using the left folders panel. I then selected all the images in the root drive on my computer and dragged them onto the 'pictures' folder on the external drive, and I expected the folder structure to come with it. Only after I realised that they had all moved into one folder. Is there a way of moving the images back into a structure without manually doing it? Here's a screenshot.....
View 9 Replies View RelatedIm using the most recent version of Lightroom 5.3 (updated through CC - even though this has shown up on previous version) on Windows 7 and all the folders in my library are showing up with the directory path in front of my folder names. How can I get rid of this? I do not see any options in preferences to turn this off. I have also turned off preferences in Windows > Folder Options Control Panel "Display full Path in Title bar" option.
I have Lightroom on several computers and have set up preferences the same on each workstation, and this only shows up on one workstation.
I just copied around 30GB of photos from my Mac laptop to a secondary internal drive that I placed in my Mac desktop. I then copied the Catalog from my laptop and put it in my primary drive on my Mac desktop. I double-clicked on the Catalog and it seemed to open everything up. I clicked on some keywords and it is finding the images. I never used LR for anything other than adding multiple keywords to all of my images.
1. However, the folder section on the left has question marks next to each and every folder that displays in that section. Why does it have the question marks and what do I need to do to remove them?
2. Do I need to do anything else to ensure the transfer is complete?
With the Adobe CC upon us, I'm am questioning staying with Adobe proprietary DNG (proprietary in the fact it has edits embedded that only Adobe products understand) and PSD files long term.
I have never used Lightroom. But am a heavy Photoshop/ACR user. I have many ACR edited DNG files and multi-layered Photoshop files.I want access to my files in the future (including edits) without having to always have the monthly CC subscription (in the future).
Question: Can Lightroom (not a CC product currrently and hopefully not in the future) open & understand the edits (cropping, color balance, lens correction, ...) I've already done to my many DNG files in Adobe Camera Raw?
Even if I use the CC in the near future and eventually not subscribe, I want future access to my DNG and PSD format files, including all the edits).if Adobe guaranteed a free PSD & DNG viewer (understand the layers, edits, ...) and give the ability (for all time) to export to a flattened image with edits applied to TIFF!
After high lighting several photos, clik on rotate ( see there is no load on the CPU only a very small one in the middle) only the highlighted photo will rotate NONE of the others will not even over time do they respond. same in Libary mode as well
NOTE - why is "auto sync" showing as an option in libary mode?... is that not only availible in Develop mode? after i reset ( see below on the update) sync meta data is NOW shown as the option...
There are not the little 3 dots on the selected photos, showing that it is "working on the edits"
I cleared raw cache, reset all develop presets, restored all local adjustment presets, changed Catalog settings to preview quality to medum ( down from high) Previews size unchanged at 1440 pixels
lr4.2 clean new install, upgraded to lr4.3rc, upgraded to lightroom 4.3 all versions were 64bit.
I edit my images for the most part in LR4 then export as a raw file into a new folder. Then when I view the images in bridge my edits don't show up. Do I have to convert to JPEG for my edits to stick?
View 3 Replies View RelatedI use Lightroom 4 and when I went in to look at some images I had recently edited, (all my images are large jpegs, and I "add" my photos to LR) they all started to change to some weird high contrast edit right before my eyes, one by one without me touching or changing anything. They also had a little exclamation point on them. When I clicked on the exclamation it says "the metadata was changed by Lightroom and another application" and I could "import settings from the disk or overwrite the disk settings." When I clicked import settings it reverted back to my original edit. But this didn't last.. after a few minutes they kept changing back to this other random edit.
I read online that I should save the metadata so it can't be changed, so I highlighted every image I have in Lightroom and saved the metadata. (this took about an hour for Lightroom to do) But now when I go back into Lightroom to look at my photos they do something different.. now they start to revert back to the original UNEDITED files all my themselves, one by one! I have already exported all the edited photos into folders so I have them. But what do I do!? If I ever want to go back to an edited photo and export it at a different size or retouch it or something, none of the edits are saved, I have to start from scratch! I'm a wedding photographer and I'm scared to load more images and work on them just for LR to change them back
Love the new basic editing sliders. But, finding when I "edit in > PS > edit with LR adjustments", the image in PS is NOT the same as in LR. It's "darker", the histogram isn't transferring properly.
View 3 Replies View Related