The last batch of images imported from my Canon 7D are all showing blue patches in the shadow areas.
LR 5.2, Camera Raw 8.2
I am wondering if it is linked to lens profiles, as it appears to have started since I have begun using the Sigma 30mm 1.4 lens.
Today is the first day with Lightroom 3, where I have over 200 photos from an event, that I am walking through each photo. I am in the develop module and I am setting the color label to red or blue. What seems to be constantly (not every time) happening is when I click the color for the label, LR will move to the next photo, but not apply the color label.
As I write this I'm trying it out to notice a pattern. What I see is photo 1, I click on the red label and the photo is labeled red and LR moves to photo 2. I click on the red label and LR does not set any color label and moves to photo 3.
Another thing that happened is I was then at photo 3 and clicked on the blue label. LR did not set the blue label but jumped to photo 4 and put the blue label on that photo
When I view my images in DPP they look perfect however the minute I open them in PScs5 they look terrible..... the colours in the shadow areas are blocky and banding appears....... I am guessing that PS is just not using the correct profile to open them but all the setting look sensible and match my friends version of PS. I am running Windows 7 on a PC with an ATI HD 6570 Graphics Card with version 12.3 drivers.
View 2 Replies View RelatedFor last few days, when I am opening raw images (.nef) files in CS3 - it is showing blue patches in some places. I am sensing that it has got to do with display properties but not able to figure out what needs to be done here. I use a NVIDIA and Windows XP.
View 9 Replies View RelatedThe issue probably has to do with the differences in settings. I am using the 64 bit version of Windows 7.I imported a group of pictures with the XMP sidecar files generated with Lightroom v3. All the image files, a mixture of Canon Mark 5D II RAW and jpg files from my point & shoot UFO camera, imported without issue picking up all my tagging and GPS settings. When importing you are put into the Library module and from the Library module I could click on any RAW or jpg file, look at the meta data and view full screen.
I then entered the Develop module with a jpg picture selected and none of my settings made it across. The process was set to 2012. I was able to try out the new adjustments and all worked very well.I then selected a RAW file while still in the Develop module and all hell broke loose.
I got a tip window pop up, the film strip went orange, the rest of the app screen then became greyed out and then behind tip pop up a crash window containing this information appeared:
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.0.0.1
Application Timestamp: 4ef2621d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.1
Fault Module Timestamp: 4d5f034a
Exception Code: c000041d
Exception Offset: 000000000003c1be
[code]....
There was no other path but to have the app close after that. Now since Lightroom has left off with the RAW file in the develop module when I restart the app it starts in the develop module with that same RAW image selected and I crash before I can change to a jpg. I am probably going to have to delete and recreated the data file to use the app again
After the all this I went back and checked to see how I had the catalog settings in LR 3 set because there were no sidecar files for the jpg images. I did not have the option to write settings to jpg and tif files but did have write settings to sidecar set. So I have a bit of a mystery why I have no sidecar files for jpg files when I should have based on the way the settings were. This probably explains why I had no issues at all with them in LR 4.
I am going to get LR 4 working again and then import the same batch of pictures without any sidecar files and see if I have any issues. I will report back soon.
I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite. I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
I am shooting with a Canon 1DX as well as 7D. I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW. At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc. I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR. I have no idea if this is a default behavior of if I have done something to cause it. I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all?
2. Can I prevent LR from applying the Adobe Standard Style and apply no style?
3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
I have a Fuji X-e1 and the latest update of LR 4.4 running on 10.6.8, 16GB RAM, all OS software up to date.
The problem is my Fuji RAW files don't show the correct lens profile in the Develop module. The only choice available to choose is for Fuji X100 (which I've never owned or shot). The metadata in the Library module is correct for both the lens and camera, and also shows correctly in Bridge.
However, with the same software on a friend's Macbook Pro -- also 10.6.8, LR 4.4, etc. -- the lens profile correctly allows for the X-e1 and 18mm lens auto-correction.
I uninstalled LR on the desktop using an uninstaller called Zap It, downloaded 4.4, reinstalled and still the same 'error'.
The main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies View RelatedFor some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedSharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
I can't process any images as the basic tab has suddenly vanished.how can I get it back?
View 3 Replies View RelatedAfter making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies View RelatedWhen I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 Replies View RelatedWhen I open Lightroom the develope module does not appear with the other modules in the upper right hand corner. How do I corret this?
View 2 Replies View RelatedI am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool.How do I fix this and get the new tools so I can continue my 30 day trial?
View 1 Replies View RelatedI can't access the "Hue" tab in develop module. I can only access Hue by selecting "All."
View 2 Replies View RelatedMy develop module is not fully opening. The only items it is allowing me to edit is lens profile correction, vignetting. How to restore the full develop module starting with temperature, contrast, blacks, whites, shadows, etc., all the way down the whole module.
View 1 Replies View RelatedMy LR 5 is developing with LR4 processing. How do I upgrade so I am developing with LR 5 develop tools?
View 4 Replies View RelatedThe new LR4 develop module looks exactly like the LR3 . The quick what's NEW video shows a highlight and shadow slider and the exposure and contrast sliders are in different places.
View 3 Replies View RelatedI don't see the RGB in curves in the develop module and it still shows brightness. In fact it looks just like LR3? Just downloaded upgrade. What's going on?
View 9 Replies View RelatedWhy my develop module is not highlighted?
View 12 Replies View RelatedDid I lose my adjustments in Develop when I clicked on Library in Lightroom? I have been working on a group of about 300 photos for the past several days. Today I was in Develop and went to Library to get a couple of new photos. When I got back to Develop all my adjustments were gone. Can I get them back?
View 3 Replies View RelatedI want to take advantage of a FULL SCREEN to see my images.However, the panel with all the controls takes up about 1/6 of the real estate.I know the panel can be auto hidden, but I hate that workflow.
I would love to put the panel on a separate monitor leaving just the image full screen on the other.
I'm using the last version of Lightroom (3.6 if I'm not wrong) and I'm facing a very uncomfortable issue with the Develop module.
I adjusted precisely every color luminance and saturation so it looks rather good in the Develop preview (set to fit), and did an export...
The preview I worked on and the export simply don't look the same.
I work with NEF files from my NIKON D3100 DSLR on a Mac OSX 10.7 MBP.This cannot be the external display profile not correctly adjusted since I viewed every pictures on the same screen.I unchecked every boxes from the presets tab in the settings window.
Here are some screenshots and exports.
Fit preview in the Develop module (left) and the actual export of the same picture (right).I didn't activated any lens correction option and adjusted any color. This is the RAW file and its direct export.Screenshot of the preview window on top of noise correction options (left) and the same area once I zoomed in in the main preview (right)
A couple of days before today I was using Camera RAW from PS CS5 to correct my NEF and was only keeping exports in JPEG. I decided to use LR 3 on my entire workflow and I'm being skeptical...
EDIT : i can join any required file or screenshot if required. I have some other shots having tthe same issue (a lot of ones indeed...)
EDIT 2 : i just found out the picture has much more acurate colors (relatively to the export ones) in the Library module in fit preview (Loupe I guess)
I have Lightroom 3.5 - Photoshop CS5 Extended and both are up to date but I'm trying to get my ALR to use the latest Camera Raw 6.5 but it's not a selection on the drop down menu.
My camera profiles are there for Nikon D700 but i'm using presets that use ACR and it's old. -- i've removed Lightroom (an unistaller would be super useful adobe!!!) but it still remembers my old catalogs etc...
I have been using 3.6 from day one with no problems, now I can view all files in my catalog, but when I go to the develop module the picture does not show and LR freezes. I have tried everything to no avail.
View 1 Replies View RelatedI recently updated Lighroom 4.1 to 4.2 successfuly, but now any time I go into the Develop module, Lightroom pauses, then crashes and forces me to quite the program. Is this a bug than needs to be ironed out, or is there something else going on?
View 1 Replies View RelatedI get red and blue splotches on photos in LR5 Develop Module. Seems to be mainly in bright areas of photos. Not there in Library module. I noticed this in the Beta as well but thought it would be fixed before release. In LR4.4 everything is fine.
View 2 Replies View RelatedI am running Lightroom 4.1 RC on a 2010 iMac 27" with 2.93 core i7, 16GB of RAM and a 512GB Crucial M4 SSD drive (where the Lightroom catalog resides). When I scroll through images in Library, I can move through images very fast, however, when I try to do the same in the Develop module, it becomes really, really sluggish. Probably about 5 seconds between images. I have 1:1 previews generated.
View 3 Replies View RelatedI have installed lightroom 4.3 on my Dell inspiron 1525 running Windows Vista Home Premium with SP2. The moment I try to get to Develop module, Lightroom displays message in a window as "Adobe Photoshop Lightroom has stopped working" and displays the options to check online for a solution or close the program. Is it the operating system or the buggy lightroom ? I did try 4.2 as well with no successful results.
View 11 Replies View RelatedWhen i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
View 8 Replies View Related
