I get this error often when working on a photo in LR5. If I shutdown LR5 and restart error goes away, but may turn up on another photo in a few minutes. Very frustrating. Using windows 8, 4gb ram. Never had these problems on LR3. Seems like some form of bug because the photos are fine when I restart.
View 7 RepliesI'm a photography student at the Art Institute's online division. I've been working with LR 3 for the past couple of weeks. Suddenly the program shut down; I got an error message from Windows, saying it would keep looking for a solution, but then I couldn't even open Lightroom at all. I was having the same problem with PhotoShop from the Creative Design Suite 5.5.
I uninstalled both programs, then re-installed. Now PhotoShop's fine, but Lightroom is still doing (or rather NOT doing) what it was before, with the same error message.
Oh--one more thing. I recently bought a Nikon D5100, so I uploaded the two software disks when I was ready to transfer photos directly from the camera to my laptop. I don't THINK this is the problem, since I didn't start using Lightroom until after I uploaded the Nikon software, and both worked fine last week. However, just in case, I uninstalled the Nikon software & haven't yet re-installed that.
After I've upgraded to OSX 10.8 Mountain Lion, I begin to see the following issue while trying to import .mts files from my Panasonic GH2 SD cards:
1. LR no longer sees individual files on the SD card. I know that this is because ML has decided to treat all AVCHD-related directories as packages and LR can no longer see the indivisual .mts files from the file system. However, Premier Pro CS6 CAN.
2. Even after copying the .mts files to an unrelated directory, LR is no longer able to import the files. I get the "There is a problem with the video file"
3. The .mts files I previously imported into LR 4.1 with Lion no longer plays inside LR. I see the thumbnail but if I attempt playback I get the "there was an error working with the video" error.
There obviously major compatibility issue with LR 4 and ML in relation to video files. I relies on LR for all my video file cataloging needs - now I am unable to do so. All of this was working just fine with Lion.
When I try and export a photo in LR4 I get the following message:
"An internal error has ocurred: Win32 API error 2 (“The system cannot find the file specified.”) when calling ShellExecuteExW from AgWorkspace.shellExecute"
Even so, it does export the photo to the right directory.
What does this code mean?
I get this error when trying to export fom lightroom 3.6. It happens when exporting to disk or using one of the plugins. What causes it? How can I fix it?
View 2 Replies View RelatedI just switched from PC to MAC and have troubles using the PC catalogues, or better: associating the images.
I copied the catalogue as well as the images to the MAC harddisk. When I open the catalogue I see the images, but they cannot be found on the disk. So I search on the harddisk for the new path but after finding it I get an error message "Die Datei "xxx.CR2" ist mit einem anderen Foto im Katalog verbunden." In English something like "The file "xxx.CR2" is associated/connected with a different photo in the catalogue."
While trying to load a photo from catalog in Lightroom 4 Develop Module, load fails and I get message "an unknown error occurred." What does this really mean, what is the fix? Using PC and Vista.
View 2 Replies View Related have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
After editing in perfect photo I cannot unstack the edited photo in LR4. The thumbnail shows the number of photos in the stack, but right click/expand stack has no effect. The edited photo is not showing.
View 2 Replies View RelatedIs there any way to join a .jpg photo with a Word doc to form a printable photo? It's for a team photo and I want to add the names under
View 3 Replies View RelatedAfter finally running out of space on my computer I've shifted my photo library onto an external hard drive. I did this outside of lightroom as I did not expect there to be too many complications
There is a general folder named "Photos" and within are the sub folders for the photos. I did a simple drag and drop from my computer to the hard drive and expected Lightroom to simple show the new directory in the folder panel.
What would be the simplest way to re-access the files since moving them to the new hard drive?
I just reinstalled Photoshop CS5 Extended onto my new computer. I had it running before but I got a new hard drive. I am still running Windows 7 32 Bit. Seemed to install. When I opened up Photoshop and tried to open a new document or open and existing photo I got this message: "Adobe Photoshop CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 6 Replies View RelatedI have been using Adobe Photoshop CS3 for a couple of years and for the most part haven't had any problems. However, when I tried to run the program today, the message "Adobe Photoshop CS3 has stopped working. Windows can check online for a solution to the problem." popped up, and I could not run Photoshop.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 10.0.0.0
Application Timestamp: 4601eae8
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.6195
Fault Module Timestamp: 4dcddbf3
(It also listed information for the Exception Code, Exception Offset, OS Version, Locale ID, and four different kinds of Additional Information, which I have not listed here).
I also suspect that I'm having the same problem with all of my other Adobe software (I have Adobe Creative Suite 3 Web Premium), since I am getting similar error messages for Adobe Illustrator CS3, and Adobe Dreamweaver CS3 will not open at all and does not even display an error message.
How to solve the error in Adobe illustrator cc cant finish previewing, There isnt enough memory ID: 108 how to solve the error.
View 5 Replies View Related there is a black spot screen problem with my photoshop. No matter I open a new file or a old file, the black spot screen is still here.Also the black spot screen are always changed, when I zoom in or out, sometimes the whole screen disappeared.
Sometimes I can see the object from my layer inside the black spot screen, but when I move it, it disappeared Actually I had the same problem 1 year ago, but i dun really remember how to solve it...
I have a Black and White photo that my son in law wants me to enlarge. The background is good, but the subject is almost silhouetted. I want to make the subject lighter without making it seem like it doesn't fit the scene.
I'm far from expert, but finally got an image I liked onscreen--using layers. It printed out too dark. I use MonacoEZColor for my work and my profiles work for color prints.
My head is spinning trying to find out if I should scan RGB or Grayscale; Hi Bit or Low; also trying to find out about gamma settings, dot gain, etc. A lot of info out there for converting from color or for duotone prints,
workflow for this project -- from scanning to printing?
Using an Epson Perfection 2450 Photo scanner; Epson Stylus Photo 890 printer, new calibrated monitor, and Photoshop 7.
When I try to change my photo on my profile, it always says the image is too big. I've made it even like 10 x 10 pixels, and it STILL says it's too big! I'm not sure if it's me, or something wrong with uploader.
View 4 Replies View RelatedInstalled CC photoshop on a brand new W530 laptop. Upon launching either the normal or 64 bit versions of photoshop CC, the application loads then I receive the following error...
"Adobe Photoshop CC has stopped working"
I am unable to use the application, I have removed and reinstalled also in an attempt to correct the issue. investigation of the event log results in the error below.
Log Name: Application
Source: Application Error
Date: 7/17/2013 9:24:12 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: TAG004144.tagusa.com
[code]....
repeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
This is about the "MetadataMgr has stopped working" endlessly repeated error.VideoStudio Pro X3 under Windows 7 (64-bit) has recently become unstable, and I get the "MetadataMgr has stopped working" endlessly repeating error. Corel's MetadataMgr.exe doesn't stop creating errors unless the PC is rebooted.
I uninstalled VideoStudio Pro X3 and then reinstalled it. The problem disappeared briefly, but came back next time I attempted to burn a DVD using VideoStudio Pro X3. So again I'm in MetadataMgr hell, with a video editing program that bombs. All patches on the Corel WWW site have been installed, with no affect on the problem.
I see that this has been discussed here before (Thread: Possible to use DVD Factory Pro 2010 w/o metadatamgr.exe?), and there is supposed to be a fix by deleting some directories somewhere.
I have been using Corel Video Studio Pro X4 for a while and never had this problem before. When I try to burn a clip to dvd I get the message:
The working folder C:documents and settingsxxxmy documentscorelvideostudio14.0 may not have enough space. We will clean up the converted cache file. You can also change the working folder in preferences.
The problem is I have already changed the working folder in preferences. When I click on ok to see if it will clean up the converted cache file nothing happens. Why is this coming up when I have the working folder in a different drive with well over 370 gig of space. How do I get this to work again. Another thing I was burning a clip and when it finished it came up with a error and did not work. That is when I tried to re burn the file and got this message. I have tried burning a different file and get the same message. As it is it is useless to me now.
I have Autocad LT 2007 running on a PC with Windows 7.I am having problem with creating layers or just working with layers.I get this error message:
Fatal Error: Unhandled e06d7363h Exception at 7585c41fh
The second part of the message "at 7585c41fh" is different sometimes, but the first part is always the same.Then Autocad shuts down.
I'm moving pictures of people onto a backround of flowers and plants. I've used the magic wand and polygonal lasso to get the people on to the backround. That works fine, except the backround near the persons hair shows up as a halo or line around them or I see the backround between the starnds of hair.
How do I have the person show up on the backround without lines or the backround from where I moved the person from. I hope this makes sense., I'm using CS4
I am starting a new threads about bumpmaps and FSX because a. I have used the wrong language for you to answer me and b. the old post provoked heated debate, which I didn't want.
OK, the answer to generating bumpmaps is that I have to move the red channel (copy?) it into the alpha channel - how do I do that? Corel is obviously not a graphics tool that is aimed at my brain... and not the way I like to think and I am missing something here.
Once I have moved the red channel contents to the alpha, I can flood fill the red with black and the blue with white - that is fine and I can do that.
Now I have to save the RGB plus alpha - for FSX use I need to save in ddsx mode - or convert to dds using "Imagetool" or "DXTBmp" - I guess saving as TGA would do the trick? Is there a better RGBA format?
I had no problem working with and feathering masks in Designer Pro 9. However the upgrade to Pro X9 has made "improvements" that I cannot figure out.
I have a photo in which I want to blur and darken the background while leaving the subject person clear and bright.
I used the mask painter tool to mask out the person, so far so good. I used the picture editing tools to blur and de-bright the unmasked portion. So far, so good.
The result had (of course) too hard an edge between the masked and unmasked portions of the image.
How can I soften (feather) the edge of the mask? OR how else should I be trying to accomplish this task?
To repeat, I could do this just fine in Pro 9, but in Pro X9 I just can't seem to find out how to do it.
I've downloaded a trial version of Photoshop CS3 but it wont install i keep getting error 1327 invalid drive E:/???? I dont even have a drive E/ I have a drive C:/ for my HD and a drive D:/ for CD's etc.. its doin my head in coz it took like 5hrs to download the trial version and it wont even work.. seems like a waste of time.
View 1 Replies View RelatedI downloaded and installed cs6 for windows 7 32 bit and cant open it to use,i get the message" adobe photoshop cs6 has stopped working" I have tried different graphics drivers but still the same. My other adobe softaware works fine,IE: elements11 and lightroom4.
View 5 Replies View RelatedOn my new Dell XPS 8500 Win 8 computer Photoshop CS6 keeps stopping working. I've tried both 64-bit and 32-bit versions and updated the video driver after phoning Dell. Also installed latest Adobe program updates. I keep getting the error message "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 14 Replies View RelatedI've instslled CS4 but keep giving me error message ' licensing for this product has stopped working' Error 150:30
View 2 Replies View Relatedhow to get the dvd factory pro 2010 running on a windows 7 pc? I just installed videostudio x3 on my pc and I cannot burn a dvd.
View 1 Replies View Relatedi am usually getting "Fata Error " while working, it comes normally 5-6 times in a day and its so irretating to shut down the autocad and restart the whole thing.
i am using below config system
Intel Core i3/ 4GB/ 500GB HDD/ 1GB NVidia Card/ Gigabit Lan/ Windows 64 Bit OS
i have installed Autocad 2012 3D 64Bit version. and my file location is on network with attached NAS connected on 10/100Mbps Network.
there are totally 7 desktops out of which 3 pc's are having 3D License and rest 4 are having 2D License.
Remember all my data stroed on my NAS and all 7 users access from netwrok to modify and editing of my Autocad files size not more then 200-400Kb
attached snap shot of error generated on screen.