Am reading Kelby's LR 5 book page 162 + Cannot see any place where I can click to see the individual channels adjustment pop up to select chanel. He even has it circled in the illustration but I don't have anything like that in the Tone Curve panel What am I missing, I'm in Win 64K
View 2 RepliesWhy in LR4 is the Tone Curve default set to Custom with a contrast lowering curve? I would like the default to be linear, but I can't remember how I set that up in LR3.
View 5 Replies View RelatedHow I can get the Tone Curve back. I've done all the usual checks. One day it was there and the next it was gone.
I'm using a MacBook Air. (no problem with LR5 on my MBP)
Why does the clarity slider seem different to me in LR4 (4.1 RC actually)? IN LR3 I loved that thing. I would ramp it up quite a bit with many photos. It would give it a nice crisp look. Now it seems as if it just makes my shots look like they have too much contrast. Also, when using the clarity brush, many times it seems as if where I paint it on it actually lightens it up. I havce had to look as see if I had the exposure tool on instead.
Also, I swear a "medium contrast" tone curve setting is different now as well. This was the default setting in LR3. Now default is linear. But if I apply a medium curve from the drop down, it looks over cooked? What the heck? Are these things just me? BTW I am working RAW files.
My tone curve sliders disappeared in Lightroom 3 (exposure, recovery, fill light, blacks, brightness, saturation, vibrance). I have googled it and tried a few things with no luck.
View 1 Replies View RelatedWhen I go into Lightroom 5 Develop mode, the Tone & Point Curve box has disappeared. It was there yesterday and I can't figure out how to get them back. I just purchased the product 2 days ago.
View 1 Replies View RelatedWhere is it? It was there in 5.0 and 4.4.
View 1 Replies View RelatedInstalled LR4 today and ran into a problem.I have been working with alot of negatives lately and therefore my photos have a reversed tone curve. When I converted my existing catalog all looked fine, using the old previews. But when I go into develop on any of the photos the tone cureve gets reset to normal behaivour, and I have to redo the "invert". And all this using the old process (2010).
View 2 Replies View RelatedCurrently I'm trying to save an own "tone curve" but in the menu no entry to save it appears. In my understanding an entry "Eigene" (or "Own") should appear as soon as I am changing the tone curve manualy.
I am using the latest version of Lightroom 3.6 running under Windows 7 64-bit (both in German) with Camera RAW 6.7 installed.
how to adjust the curve of individual RGB channels. I am assuming the LR4 Tone Curve works like the PS Curves dialog with the channel dropdown.
To make adjustments to individual points on the tone curve, choose an option from the Point Curve menu, click the Edit Point Curve button , and do any of the following:
Choose an option from the Channel pop-up menu. You can edit all three channels at once, or choose to edit the Red, Green, or Blue channel individually. When I click the little icon in the lower right corner of the Tone Curve panel, the panel shrinks so that I don't see the Regions sliders. If I click again, they are visible again. I can't find where to select one of the three indvidual channels.
The Help refers to "the Point Curve menu." Where is the Point Curve menu? Is the Point Curve different from the Tone Curve?
If I right-click (Windows) in the curve dialog, the context menu has a Show Info option. I click it on/off and don't see any change or any info. Where should I be looking for info?
I created a custom Tone Curve in LR3.6 on Win7 64-bit as an XMP file, changing the default location to another folder. I right click on the Custom <> icon and can see the Save feature and some preset curves, but not the Tone Curve I saved that I called "Backlit Tone Curve.xmp." Do I have to move it to a special folder in the presets directory? I restarted LR and it still did not show up anywhere.
View 5 Replies View RelatedWhen clicking on the bottom right icon of the point curve, I can´t get to the channel selector in LR4.2.
View 1 Replies View RelatedI have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
I'm trying to locate the drop down menu for the adjustment brush, not the panel but the acutal menu that also has some Adobe developed presets (like soften skin and whiten teeth for example).
View 2 Replies View RelatedCorelDraw X4 sp4 w/ hotfix
Why is it that when in Draw save the tone curve settings it saves in a totally different directory? Then if I want to open that settings file it takes me somewhere else showing default styles/settings (*.crv)?
how can i add an anchor point in the curve in the Channel R / G and B?
in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green and 1 in the channel blue.
i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustment tool. i can do it with ctrl+m and call the curve but i can't do it with curve adjustament tool
is there a way to add a anchor point in each channel red , green and blue (like the prev Photoshop)?
I am trying to find the channel tab in PHotoshop Element 11 to find the alpha layer for my .dds image. A tutorial i'm following that a private user has posted on the web, in there version of photoshop it shows a channel tab as well as the layers but in my version 11, it shows the layers but not the channels. How to access channels in the 11 version?
View 3 Replies View RelatedI can't find my lens in the Lens Correction menu. Is there a way to add it?
View 2 Replies View RelatedI was recently trying to find the normal depth in a natural channel to use as an outfall water surface elevation in SSA. I double checked the normal depth calculations using the Express Add-On in Civil 3D. I found that while the normal depths correlated closely for channels with a single roughness coefficient, they varied considerably if a composite roughness coefficient was used for the left and right overbanks. This leads me to believe that composite roughnesses are being calculated incorrectly in SSA. I would like to use SSA for floodplain analysis, but am unwilling to do so until I have confidence in the calculations.
View 2 Replies View RelatedI am try to create a function that compute the length of a line such as the picture shows on top. The code I have now only getting the straight line distance. It's there a way to compute the curve distance?
View 3 Replies View RelatedWhere can I find a preset shape of a ogee curve. It's sort of a slanted S. I've attached an image of one. Lacking a shape, how to draw one using PSP X5. I used autocad and converted the DWG to a JPG file.
View 5 Replies View RelatedI'm using W7 and ACAD 2010. I can't find my cui menu file.
View 4 Replies View RelatedI'm trying to work out the optimal workflow for doing HDR (using HDR EFEX 2) on a set of images. I can apply LR's Lens Correction (Nikon, 17-55mm F2,8) and chromatic aberation removal on the whole set set (using LR Sync) before I export to HDR - then turn off the Chromatic Aberation fix in HDR - and that gives me one workflow.
However, that makes a lot of changes to the TIF's before I go in - so I am wondering if it would be better to export the RAW files converted to TIF using minimal changes from LR e,g, no CA fix or Lens Profile correction; let the HDR do its thing and then make profile corrections, Upright, etc upon return from HDR. However, when I get back from HDR and go into Develop with the returned file and go to Lens Correction, I cannot chose the 17-55mm F2.8 lens from the drop downs. There are only about 4 or 5 lenses now showing as Nikon possibilities-and the 17-55 is NOT among them.
How come I don't still see the full list of Nikon profiles - shoudln't I be able to apply any profile to a TIF (even an incorrect one) ?
I tried pasting the Develop Settings from a virtual copy where I had set the Lens Profile to 17-55 F2.8 - but that only turns on the Lens Profile 'filter' and does not actually force-on the specific correction.
why Lightroom 4 is importing my images with a warmer tone, then exporting with a cooler tone. There are no presets selected on import so why is it doing this??
View 2 Replies View RelatedWhy would Lightroom give a sepia tone to anything I am working on? This only happens if I am using my AOC 27" monitor. The menus are still white, only the work gets the sepia added. Now the strainge part, if I switch to a different monitor, the problem goes away. I also use Photoshop and have no problem.
View 1 Replies View RelatedI take a photo that is a girl.Her skin tone is near yellow tone.
How to make skin tone like newborn baby? It means: brightly, have a little pink, and translucent (I don't know how to say that...).
I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com. The color of the images look good on the Windows 7 photo viewer. It looks horrible in Lightroom 4. My monitor is callibrated, the import develop setting is set to "none" , the box is unchecked "apply auto tone adjustments".I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color.
View 10 Replies View Relatedi have scanned 35mm B&W negs into LR4. have printed about 40 images. all have different tones. some have blue or green or brown tones. some images are warmer than others and some colder.
the temp and tint scale are grayed out. impossible to have all images with same exp/contrast/etc.i have been told that when presenting a b&w body of work, all printed images have to have a similar tone.
Can not find the menu location for the node editor???
View 8 Replies View Relatedwhere on the screen is the find menu? i can't find it elements 9
View 3 Replies View RelatedHaving just loaded 10,000+ scanned negatives in LR 4.3, I am applying Auto Tone as a starting point for development settings. I have selected all images in Grid View, right-clicked to Develop Settings...Auto Tone. I can then go to the Develop page and Auto Tone is shown in every images History.the Auto button is still visible and I can click on it and get different [generally better] settings.
Is there a reason why Auto Tone applied to multiple photos produces different development settings from when it is applied individually to each photo?