Lightroom :: Color Option Of The Tone Curve Of 5.2?

Oct 13, 2013

Where is it?  It was there in 5.0 and 4.4.

View 1 Replies


ADVERTISEMENT

Lightroom :: 4 - Tone Curve Default Set To Custom With Contrast Lowering Curve?

Mar 21, 2012

Why in LR4 is the Tone Curve default set to Custom with a contrast lowering curve? I would like the default to be linear, but I can't remember how I set that up in LR3.

View 5 Replies View Related

Lightroom :: How To Get Tone Curve Back

Aug 13, 2013

How I can get the Tone Curve back. I've done all the usual checks. One day it was there and the next it was gone.

I'm using a MacBook Air.  (no problem with LR5 on my MBP)

View 2 Replies View Related

Lightroom :: Clarity Slider And Tone Curve In LR4?

Apr 26, 2012

Why does the clarity slider seem different to me in LR4 (4.1 RC actually)? IN LR3 I loved that thing. I would ramp it up quite a bit with many photos. It would give it a nice crisp look. Now it seems as if it just makes my shots look like they have too much contrast. Also, when using the clarity brush, many times it seems as if where I paint it on it actually lightens it up. I havce had to look as see if I had the exposure tool on instead.
 
Also, I swear a "medium contrast" tone curve setting is different now as well. This was the default setting in LR3. Now default is linear. But if I apply a medium curve from the drop down, it looks over cooked? What the heck? Are these things just me? BTW I am working RAW files.

View 16 Replies View Related

Lightroom :: Tone Curve Sliders Disappeared?

Feb 25, 2013

My tone curve sliders disappeared in Lightroom 3 (exposure, recovery, fill light, blacks, brightness, saturation, vibrance).  I have googled it and tried a few things with no luck. 

View 1 Replies View Related

Lightroom :: Tone & Point Curve Box Has Disappeared

Jan 9, 2014

When  I go into Lightroom 5 Develop mode, the Tone & Point Curve box has disappeared. It was there yesterday and I can't figure out how to get them back. I just purchased the product 2 days ago.

View 1 Replies View Related

Lightroom :: Developing Photos - Tone Curve Gets Reset?

Mar 6, 2012

Installed LR4 today and ran into a problem.I have been working with alot of negatives lately and therefore my photos have a reversed tone curve. When I converted my existing catalog all looked fine, using the old previews. But when I go into develop on any of the photos the tone cureve gets reset to normal behaivour, and I have to redo the "invert". And all this using the old process (2010).

View 2 Replies View Related

Lightroom :: 5 Cannot Find Any Channel Pop Up Menu In Tone Curve?

Feb 25, 2014

Am reading Kelby's LR 5 book page 162 +  Cannot see any place where I can click to see the individual channels adjustment pop up to select chanel. He even has it circled in the illustration but I don't have anything like that in the Tone Curve panel What am I missing, I'm in Win 64K

View 2 Replies View Related

Lightroom :: L3.6 - Unable To Save Own Tone Curve Settings?

Jun 7, 2012

Currently I'm trying to save an own "tone curve" but in the menu no entry to save it appears. In my understanding an entry "Eigene" (or "Own") should appear as soon as I am changing the tone curve manualy.
 
I am using the latest version of Lightroom 3.6 running under Windows 7 64-bit (both in German) with Camera RAW 6.7 installed.

View 2 Replies View Related

Lightroom :: Tone Curve - How To Adjust Individual RGB Channels

Jun 2, 2012

how to adjust the curve of individual RGB channels.  I am assuming the LR4 Tone Curve works like the PS Curves dialog with the channel dropdown.
 
To make adjustments to individual points on the tone curve, choose an option from the Point Curve menu, click the Edit Point Curve button , and do any of the following:

Choose an option from the Channel pop-up menu. You can edit all three channels at once, or choose to edit the Red, Green, or Blue channel individually. When I click the little icon in the lower right corner of the Tone Curve panel, the panel shrinks so that I don't see the Regions sliders.  If I click again, they are visible again.  I can't find where to select one of the three indvidual channels.
 
The Help refers to "the Point Curve menu."  Where is the Point Curve menu?  Is the Point Curve different from the Tone Curve?
 
If I right-click (Windows) in the curve dialog, the context menu has a Show Info option.  I click it on/off and don't see any change or any info.  Where should I be looking for info?

View 2 Replies View Related

Lightroom :: How To Load Saved Tone Curve (XMP File) In LR3

May 22, 2012

I created a custom Tone Curve in LR3.6 on Win7 64-bit as an XMP file, changing the default location to another folder. I right click on the Custom <> icon and can see the Save feature and some preset curves, but not the Tone Curve I saved that I called "Backlit Tone Curve.xmp." Do I have to move it to a special folder in the presets directory? I restarted LR and it still did not show up anywhere.

View 5 Replies View Related

Lightroom :: Where Are Tone Curve Presets In Presets Folder

Nov 17, 2012

I have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
 
Do you know which folder they should be in (indise the Lightroom Presets folder)
 
I STILL don't understand why there are TWO comminty forums for Lightroom;

View 2 Replies View Related

Lightroom :: Unwanted Color Tone In Black And White?

Nov 19, 2012

I applied a preset to an image, and overall I like it except that it has a pinkish tone to it.  The develop panel shows it as a black and white (not just desaturated) image, and there is no tone applied through the split tone panel (both saturation levels set to 0%).  I can't figure out where the color is coming from -- I'd like to reduce it or change the color without having to drag it into Photoshop. 

View 3 Replies View Related

CorelDRAW Graphics Suite X4 :: Saving Tone Curve Settings Saved In Different Directory

Mar 31, 2011

CorelDraw X4 sp4 w/ hotfix

Why is it that when in Draw save the tone curve settings it saves in a totally different directory?  Then if I want to open that settings file it takes me somewhere else showing default styles/settings (*.crv)?

View 3 Replies View Related

3ds Max :: Mirror X And Y Option In Curve Editor

Mar 13, 2013

To make it possible for every parameter i could put the key like as in Xsi...You can make keys as in Cinema 4d - the first press m-mode modeling, the second key - e - extrude.

when i press Alt+Q, I want to see the object and his material in the material editor, I do not want to find material..i want mirror X and Y option in curve Editor like Cinema 4d - easy make reverse animations

Tools for animation as the camera when shooting handheld and most importantly to usability..I have a lot of ideas how to improve 3DS max. I have experience with almost all these programs for 16 years. Contact me on Skype, telling what you can do better - for a long time. Final3d1

View 4 Replies View Related

Illustrator :: Remove Layer Option Color Option?

Jan 13, 2012

I cannot stand it when I make a new layer in Illustrator and the color hint becomes yellow. This usually happens on the third new layer into every project. I can go in and manually change it from yellow to the ten plus other colors, but I just want yellow completely out of the list. It's awful to look at, and I think every other color is easier.

View 5 Replies View Related

Photoshop :: Fog And Color Tone

Aug 12, 2006

i've been trying to immitate this effect eversince i learned Photoshop but i can't seem to get it right do you guys know how?

View 3 Replies View Related

Photoshop :: Adding Same Color Tone To 150 Pictures?

Mar 27, 2012

I am making a short stop motion, and I need the colors to be somewhat the same in each picture. I have 150 pictures, but some a brighter / darker than the rest (and some are more yellow than others).
 
Is there a way, to "align" their colors?

View 8 Replies View Related

Photoshop Elements :: How To Use Flesh Tone Color

May 25, 2013

I just ran into an issue with Photshop Elements 9.  I was working on a digital painting trying to use a flesh tone color and while using the brush tool, when it started coloring a much more saturated version of the color I wanted.  When I used the pencil tool though the color was exactly how it was supposed to look.  I don't like the jagged edge the lines created using the pencil tool make. 

View 1 Replies View Related

CorelDRAW X5 :: Color Display - Darkish Tone Added

Sep 10, 2010

I am using Coreldraw X5. Previously I had corel x3 now there is problem with the new version of corel the color display is not proper that is the colors yellow appears to be deep yellow in corel x5 where as if I save the file & open it in corel x3 the yellow color appears properly. I mean to say that there is always a darkish tone added to all colors in corel x5. Both corel x3 & x5 are on the same PC as I am facing this display problem I have to switch back to X3.

View 7 Replies View Related

Photoshop :: Change TIFFs To Jpegs / Color And Tone Are Changing As Well

May 22, 2013

When I change my TIFFs to jpegs, the color and tone are changing as well.

View 2 Replies View Related

Photoshop :: How To Print Color Separation With Half Tone Using CS6 With Canon MP970

Mar 12, 2013

how to print a color seperation with half tone using photoshop cs6 or cloud suite with a canon mp970 printer with no postcript function

View 1 Replies View Related

Lightroom :: How To Set Lens Profiles On A Tone Mapped HDR

Aug 5, 2013

I'm trying to work out the optimal workflow for doing HDR (using HDR EFEX 2) on a set of images.  I can apply LR's Lens Correction (Nikon, 17-55mm F2,8) and chromatic aberation removal on the whole set set (using LR Sync) before I export to HDR - then turn off the Chromatic Aberation fix in HDR - and that gives me one workflow.
 
However, that makes a lot of changes to the TIF's before I go in - so I am wondering if it would be better to export the RAW files converted to TIF using minimal changes from LR e,g, no CA fix or Lens Profile correction; let the HDR do its thing and then make profile corrections, Upright, etc upon return from HDR.  However, when I get back from HDR and go into Develop with the returned file and go to Lens Correction, I cannot chose the 17-55mm F2.8 lens from the drop downs.  There are only about 4 or 5 lenses now showing as Nikon possibilities-and the 17-55 is NOT among them.
 
How come I don't still see the full list of Nikon profiles - shoudln't I be able to apply any profile to a TIF (even an incorrect one) ?
 
I tried pasting the Develop Settings from a virtual copy where I had set the Lens Profile to 17-55 F2.8 - but that only turns on the Lens Profile 'filter' and does not actually force-on the specific correction.

View 1 Replies View Related

Lightroom :: Importing Images With A Warmer Tone?

Jan 6, 2014

why Lightroom 4 is importing my images with a warmer tone, then exporting with a cooler tone. There are no presets selected on import so why is it doing this??

View 2 Replies View Related

Lightroom :: Unwanted Sepia Tone Appeared

Jan 16, 2014

Why would Lightroom give a sepia tone to anything I am working on?  This only happens if I am using my AOC 27" monitor.  The menus are still white, only the work gets the sepia added.  Now the strainge part, if I switch to a different monitor, the problem goes away.  I also use Photoshop and have no problem. 

View 1 Replies View Related

Lightroom :: How To Make Smooth Skin Tone

Feb 12, 2013

I take a photo that is a girl.Her skin tone is near yellow tone.
 
How to make skin tone like newborn baby? It means: brightly, have a little pink, and translucent (I don't know how to say that...).

View 6 Replies View Related

Lightroom :: Apply Auto Tone Adjustments

Feb 9, 2013

I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com.  The color  of the images look good on the Windows 7 photo viewer.  It looks horrible in Lightroom 4.  My monitor is callibrated, the import develop setting is set to "none" , the box is unchecked "apply auto tone adjustments".I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color. 

View 10 Replies View Related

Lightroom :: How To Get Same Print Tone In Scanned B&W Negatives

Jun 15, 2013

i have scanned 35mm B&W negs into LR4.  have printed about 40 images.  all have different tones.  some have blue or green or brown tones.  some images are warmer than others and some colder.
 
the temp and tint scale are grayed out.  impossible to have all images with same exp/contrast/etc.i have been told that when presenting a b&w body of work, all printed images have to have a similar tone. 

View 9 Replies View Related

Lightroom :: Applying Auto Tone To Multiple Photos

Feb 14, 2013

Having just loaded 10,000+ scanned negatives in LR 4.3, I am applying Auto Tone as a starting point for development settings.  I have selected all images in Grid View, right-clicked to Develop Settings...Auto Tone.  I can then go to the Develop page and Auto Tone is shown in every images History.the Auto button is still visible and I can click on it and get different [generally better] settings.
 
Is there a reason why Auto Tone applied to multiple photos produces different development settings from when it is applied individually to each photo?

View 7 Replies View Related

Lightroom :: Auto Tone Adjustments Not Working Properly

Jul 14, 2013

There is an apply auto tone adjustments checkbox in preferences, but it does not work properly. After checking it, some photos still require to click on auto button on the basic panel.

View 2 Replies View Related

Lightroom :: Automatically Choosing Basic Tone Settings?

Dec 22, 2013

I'm using Lightoom v5.2. My issue is whenever imporitng photos into lightroom, it automatically choosing the below given settings. Is there any way to disable this feature?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved