Is there a limit to the number of pictures in a slideshow ? Looking for a reason to my problem :
I have successfully done a series of slideshows of my latest trip ; 4 slideshows of about 300 pictures each. Includes both pictures and video clips . Works perfectly !
Than I created a new slideshow within that collection incorporating all the slides of the 4 sub slideshows at the start . Then I went through the slideshow and deleted ( removed out of the collection ) about half of the pictures : my aim was to have a shorter version in one slideshow ipo the 4 individual slideshows with about twice the total length
However , the newly created slideshow will not run : clicking on "preview" or "play " will give me only for a few seconds the screen " preparing preview ", then a black screen appears and the error message " Adobe has stopped working ". I am kicked out of LR and Windows 7 screen comes up " checking for a solution to your problem ".
I am running without other issues LR5.2 64 bit on Windows 7; and as I said , the other slideshows within same collection run fine
My slideshows will not play, all I get is blank screen that will not exit, I have to go to task manager just to get out of it. My previews are slow and don't play right, and cuts the music out before done. I am using Lightroom 5 now, I used to not have problems at all, and then before I got Lightroom 5 I had trouble with my print module, and then now slideshow module, I need Lightroom for College, I am at a loss as to what to do next.
I'm trying to export my pics and a video from my collection to a slideshow and every time i do it it crashes.do we have a work-around? i've tried different resolutions to no avail so far.
Like the title says, every time I click on "Slideshow", LR5 crashes - immediately (it does start to set up the screen for this module, but never completes). I tried LR4.4 and it works fine. I recently upgraded (about 3 weeks ago) to LR5 from 4.4, and I haven't had any significant problems otherwise.
In LR4 i didn't get any problem but with LR5 some functions linked to the slideshow turn to a "blank" screen.The problem appears when I try an impromptu slideshow in the library or a play, a preview in the slideshow section.
I reset the default setting in LR, I download the last driver for my graphic card but without success. With LR5.2 RC this is the same.
LR5 (the final one, not the beta) crashes 100% of the times I try to go to the Slideshow module. It also crashes 100% of the times I try a simple Help/SystemInfo.
I had no such problems with LR3.x and LR4.x, and my system (Win7 64bit) is otherwise perfectly stable and has all the latest patches/updates). The problem occurs even with a "clean" install of LR5 (i.e. without upgrades or migrations from LR4).
I have a question does bridge cs3 need cache (drive space) to preview a photo or to see my photo with the slideshow feature ? i mean does bridge need to render and store the photos in the database to let me see in the slideshow or browsing i don't talk about thumbs or does it on the fly?
Why doesn't slideshow preview play the music from your start location? Sound is blank unless you start the preview from the very first slide, w hich is annoying for large slide shows where you need to time the music. I couldn't get preview to work at all (showing black photos until I set Run as Administrator in the .exe properties. Never had to do these things with PE 9 or 10.
I've just upgraded to PSE12 and it works fine in most instances. Howver when I try to create a slideshow from a selection of photos it simply stops working and then crashes. Is this a common occurrence?
I can add an audio to my slieshow. After that I cannot run the audio nor the slide show. the program crashes. I took screenshots of the error messages.
Once I have turned on font preview the only way I can get Photoshop to open and stay open is to manually delete the preferences. The font test script claims that I have no defective fonts. I have twon computers bothe running 64bit windows 7 pro. one with 12G memory 2TB disk space, quad core 2.5gHz processor with only 350G occupying the HD, and I have a laptop with only 4G memory, 222Gb HD (half full), and a 2gHz single core processor. Photoshop only has issues with font preview on the more powerful machine.
Now when I run the font test script it says I have 1600 fonts on my system, but I only show about half that in my font folder. Is photoshop reading fonts from elsewhere than c:windowsfonts
When plotting and doing a 'plot preview' Acad crashes. This happens with ALL dwgs no matter which of our 2 printers is chosen. This is only happening to one computer in the office. All computers are running Windows 7 Professional with AutoCAD Civil 3d 2011. If the plot is sent without a preview everything if fine with no crash.
I recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
When I work on a project in PremierePro CS6 v6.0.5 and put my PC to sleep, Premiere crashes almost every time I boot up Windows again. There is no error number or anything, just a window saying that PP does not work and I only have the option to close PP. So I basically have to quit Premiere every time and load up the project again when I continue working on it, which can take some time if this is a long project.
This also happens with other PC I could test this on. This is happening since the very first version of PP CS6. I had a chance to test PP CS5.5 on this issue and this was not a problem their. I was testing with Win7.
I already submitted this bug quite a while ago, but all the updates did not solve this problem.
There is also another bug I noticed related to the second monitor preview in PP CS6, that also is not getting addressed for quite some time. When using a dual monitor setup the full screen preview on the second monitor does not minimize if I minimize PP by clicking on the PP icon in the taksbar. If I use the minimize button in the PP window (top right) the preview on the second monitor stays in the background as it should. Also if PP is minimized and I am working with another application (reading a PDF or surfing the web fo example) the PP full screen preview appears after a while on its own and blocks the second monitor. So I have to go to the PP window and back the the application I want to work in in order to get rid of the preview monitor being blocked.Here you can see what I mean: [URL]
This issue has also been tested on other machines with Win7 and they all had this problem. This two issues are obviously not related to my setup because I can reproduce them on other machines.
I am using MacBook (late 2008) OS X 10.9.2 and recently upgraded to Lightroom 5.3 from Lightroom 4. After a while, some photo started to show exclamation mark at the right hand corner of the photo (*.CR2 raw files in NAS) in grid view. When I click on the exclamation mark, it shows a dialog with following message; "Lightroom has encountered problems reading this photo". So, I moved previews.lrdata, which is about 9GB, to the trash and restarted the Lightroom 5, expecting Lightroom 5 to create a new previews.lrdata. However, it won't create any preview at all.
exclamation mark at the top right hand corner of the photos in grid view.
I installed a bunch of fonts and ever since then Photoshop has been crashing when the font preview menu is accessed with the type tool. So I deleted all fonts except for the required system fonts I believe. But it still crashes when I access the font preview menu. I can't provide a crash log now.
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
Just downloaded LR 5 and noticed that I cannot jump back from a Publish Service folder preview to a different folder preview in grid mode. The only way to view photos in another folder is to restart LR 5. This only happens when I am viewing photos in a Publish Service such as Flickr.
I updated from LR 4 using Creative Cloud installer.
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
I'm very unfamiliar with any but the most basic stuff in Library and Develop. I've attempted to create a slide show, decided I wanted to change it and start over but it seems the unsaved slideshow is still hanging about.
I don't see how to get rid of it, I continue to see an 'Unsaved slide show' written near the top left/center of slideshow screen.I want to just ditch that attempt and start over.
I have a 66 image slideshow sorted from a collection.
LR will only export 11 images.
I have tried from the original images (not in a collection), have saved a slideshow, have previewed and played, everything works fine on screen but I can't export the slideshow as jpegs.
I am trying to select music for my slideshow in LR 3. When I click on "select music" in the Slideshow Module I am able to select a song but because of the number of photos in the show I need more than one song or else find a much longer song. I need to add three songs to get adequate length. This is on a PC laptop. I have tried holding down various buttons while clicking on an additional song to add. including the shift button, Alt button, Ctrl, Window button, and Fn. It still keeps unchecking the selected song and then checking the next song I click on.
How do I get more than one song into the Slideshow?
In LR 4, you should skip the previews and just start playing a slideshow (it would render as it played). It looks like that's been removed in LR5? How can I restore the LR4 functionality?
