We sailed a ferry in North-West (US to Canada) and the GPS should better show the same elevation than: Its the waterline + elevation of the passenger deck.
Instead, LR displays a different elevation with every image, ranging from +9 feet to... -300 feet, and trust me, we did not turned into a submarine
I have a Canon 6D with built-in GPS. Importing the photos into Lightroom brings in the GPS data automatically, but it doesn't bring in the GPS "log." The "log" is the actual path you've walked (or hiked or biked or driven) while the GPS receiver is on. In Aperture (or Canon software or some others), you can directly import the ".log" file into the program. Seeing your path in a new city (or whatever) is fun. Lightroom appears to only accept .gpx files.
I've found a simple piece of software that converts .log files to .gpx. (It's called HoudahGPS.) But is there an easier or better way to do this? I'm not looking to add steps to my workflow!!
The data is shown on my camera Canon 7D and is found by Canon Map Utility. How do I ger Lightroom to load the data?
View 4 Replies View RelatedI am having a strange issue with LR 5.3 however this issue could have been here before and I never noticed. Over the years I have been using the gps4cam app on either my iPhone or Android phone to track GPS data. For the most part I have never had serious issues with the data and the tracking results. I was away a few weeks ago shooting images and using gps4cam and have found some strange behavior in LR after reviewing images.
All images shot with my Canon 5D MK III and then tagged with gps4cam work perfectly in Lightroom both in showing the data and displaying fairly accurately in the Maps module. However images shot on my Canon EOS-M and tagged with the same GPS data either don't show the data (almost like it doesn't exist) at all in LR 5.3 or are completely off when viewed on maps. If I open these same images in Geosetter, they show accurate position and location on the maps.
I don't do a lot of Geotagging of my images except when I travel and didn't want to have to buy the Canon GPS Device.
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional
Is there a profile for Canon lenses 8-15 mm and Canon 800mm ? Where can it be found ?
View 2 Replies View RelatedI have thousands of polygons (and circles) which represent 2D foundation detail.
I have XY Location data (XLS, CSV etc) and Z's for the tops and bottoms of all these objects. (and hence, AutoCAD points)
I have used SHP data before (for the building footprints, and tops) whereby the top and base data is included in the data and I have use mapimport with change properties to thicken polylines and create quick 3D objects above ground.(This was created by others using a method similar to what I want, but in a competitors GIS...)
I need to do the same with the footings.
How can I create a "search" that says - for each polygon, look for a single point inside, and report its elevation and attached that to the polygon as data? Or, create a SHP of all these polygons with RL data queried of the internal point.
The points arent necessarily at centroid, which could be an issue. (Most are, however)
There is no keyID data between the polys and the points (so data joins wont work)
A friend did this very quickly for me in an ESRI Package, surely MAP can do the same!?
Map 3D 2012, and a monstrously powerful CAD workstation... just, er, not the knowledge to yet pull this off.
Is there anyway to create a point from the coordinate and elevation data listed in a section inquiry panel (see attached)?
View 3 Replies View RelatedAs shown in the attached drawing, the station label where the superelevation transitions back into normal crown shows with 4 decimal places. We have verified that all precisions are set to 0.01ft. The normal crown station at the begin transition shows with 2 decimal places.
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS
Will Lightroom allow tethering with Canon T3i and Canon T4i ?
View 2 Replies View RelatedI am using Civil3D 2010. I am trying to export the offset/elevation data from my cross sections to a text file or excel file so i can paste the info into another program. so far i've been labeling the offset/elevation info on the section and typing it into excel by hand.
View 9 Replies View RelatedThe gps data from my D-SLR camera does not appear in Lightroom 4 after importing the pictures
View 1 Replies View RelatedI am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies View RelatedWhen I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies View RelatedI have LR 4 and now I have bought a Canon 70D. Lightroom said it was unable to interpret the RAW files and directed me to get an update. I have updated to 4.4 and still have the same problem. How can I get my RAW files into Lightroom 4?
View 9 Replies View RelatedIs it possible to import directly to Lightroom 4 via LAN connection? I want to avoid using the Canon EOS utility software as an intermediate step.
View 4 Replies View RelatedProblem: Connects and works once in 30 or 40 tries. Sometimes shows the camera connection and sometimes it will not. Have changed cables, wiggled cables, used different USB ports, and anything else I could think of to do. When it works, the Tethered Capture window does show all the pertinent info and the shutter release button works. Most of the time, it will at least recognize the camera, but none of the settings and will not download to the computer/Lightroom (as seen below). The camera will shoot and record the image to the internal card... just not to the computer/Lightroom.
I have since run maintenance programs, rebooted, changed to 32 bit, etc......
Equipment: Mac 2.2GHz Intel Core 2 Duo with Mac OS X 10/7.2 using Lightroom 3 (with all updates including Camera Raw), 4 gigs ram, 500 gig hard drive,with 200 gigs open.
I am testing the trial version of Lightroom 5.2. My new camera is a Canon EOS 70D. When importing RAW files into Lightroom the colors of some photos are wrong. RAWs from my older 450D are fine.
For example on one photo the sky isn't blue but turquoise. When using the DNG Converter I get the same color. The sky was blue though. When opening the file in Digital Photo Professional by Canon, the sky is blue as it should be.
It happens on some other photos as well. Mostly if they have a high blue content. If in Lightroom I increase the blue content and decrease the shades it almost looks as it should.
Does Lightroom 5.3 FULLY support Canon 70d raw?
View 3 Replies View RelatedI am not able to use the tethering with my Canon 5D Mk3, the camera reads busy and I am not able to use any functions on the camera s wel, changing modes, speed, ISO etc.Ihave the newest version of the Canon solution installed and it works there, but not in LR4.
View 5 Replies View RelatedOr do I have to upgrade to LR4 to work with RAW on 5d mk3?
View 6 Replies View RelatedI have a doubt: when importing and converting from Canon RAW (CR2), extract Lightroom ALL COMPLETE information from the original file? I've observed that Canon RAW software display some information like the AF points that doesn't appear in LightRoom. I want to know about this question for better decide if i must convert to DNG and delete original CR2 or include the original RAW in the DNG file (duplicating his size)
View 7 Replies View RelatedHas LR3.6 addressed the poor processing of 7D raw files ?
View 5 Replies View Relatedfirst let me tell you that I'm familiar with LR concepts. I read a lot about RAW processing, color profiles and stuff. It all makes sense to me.
That having said... I'm unfortunatly quite unhappy with LR's color reproduction. It seems technically very accurate; unfortunatly -- Canon's own "Standard Picture Style" (so OOC JPEGs) are in most cases much nicer to look at, color-wise. I know it's not me alone having this feeling (just do a quick search).
Adobe provides look-alike profiles (.DCP-files) which are supposed to imitate Canon's Picture Styles. Unfortunatly none of these Adobe-profiles comes close (enough, IMHO) - most annoying thing for me is a strange blue/green cast in darker areas, e.g. shadows in daylight conditions are too bright and too blueish.
Remember, I'm using a EOS 50D (which probably won't get profile updates any more by Adobe, I suppose...)
So here's my question: Can I assume that Adobe already did the best they can to match Canon's Picture Style? ==> stop dreaming about a "better" "canon-50d-standard.dcp"-file. Take it or leave it, stop crying.
Or is there a possibility to tweak existing profiles? ==> find out how. Adobe's DCP editor, dcptool, whatever?
Why can't I import Canon G9 time lapse style avi files to mac lightroom 4.1 as I did pre 4?
View 3 Replies View RelatedWhy won't my Canon 70d raw files open in Lightroom 5.3?
View 10 Replies View RelatedThe Canon 6D is not in the current list of supported cameras for tethering in Lightroom. When will Lightroom 4 support tethering for Canon EOS 6D?
View 3 Replies View RelatedI'm trying to do some work with CR2 raw files from my 30D and the RAW files appear approx 1.33 stops underexposed in Lightroom 3.6.
I have compared with the camera jpg in LR3.6, the camera jpg and CR2 in canon DPP software / Breeze Browser Pro / Picasa.
In Develop > Set default settings ...I see it recognises that it is a canon 30D
I'm using light room 3 and Photoshop/bridge CS5. I just got a new camera – a Canon 6D and none of the programs will read the files. It is indicated I need a new plug-in to support the camera – camera raw plug-in/supported cameras indicates a 60 is supported. I found a support patch and downloaded: DNGConverter_7_3.exe.part and the application file:DNGConverter_7_3 (the application file size is indicated as 0 kB) Neither Program Will Run under Windows 7 and I still can't open any of the raw files from my Canon 6D camera.
View 1 Replies View RelatedI cannot download my RAW images from my Canon 5D MK III to LR4.1 Apparently I need the CR 2 version? Very frustrating as I have just bought and downloaded the new LR 4 and updates it. Still can't import the photos and some won't even show a preview.
View 1 Replies View Related