Sometimes when I print to a jpg all I get is the background color. I can't see any pattern as to when this occurs and when it doesn't. (LR4, Win7, original files are CR2) ?
View 2 RepliesIs there a way to eliminate the background surrounding the image before printing to a jpg? Currently, I print to a jpg then use another app to crop all the black (my background color) from around the actual image. Surely there's a way to not print the background and limit the file to just the image without having to resort to using the fixed image sizes. Does such a thing exist in LR4.1?
View 1 Replies View RelatedI am a Pro Photographer, and have been printing via Photoshop for years, and am trying to print to my Epson 9900 through LR3.
Workflow is simple, Nikon .nef (Raw) files are imported into LR3 - all monitors are calibrated w/ pro-grade color management colorimeters/software ....
Everything looks great on screen, and the TIF files exported and picked up in Photoshop and then printed, look great.
However, my files printed directly from LR look horrible - as if color profiles are being applied twice somewhere, but I can't figure out where.
Images are shot in AdobeRGB color space.
Color management in the Epson 9900 print driver is turned OFF. (same as every other program I print from)
My LR3 screen for printing looks like this:
Right now I am working on a Win 7 64 computer and have a Canon MP810 printer. I read the materials on color management and set my color management in "Print" in Lightroom 4 to "managed by printer". My printer color management in advanced settings is set all to defaults. When I print a photo from Lightroom 4, there is a distinct magenta cast to the entire photo, but it's most observable in midtone neutrals. A burnt out section of a lightbulb goes white, for instance, but greys seem to go pinkish, greens to a rust, etc. I also printed the same photo from a windows file, using Windows 7 print mode. That photo seemed to go slightly magenta in the neutrals but not nearly to the same degree. what I might try or test to see if I can get my print colors more accurate?
View 3 Replies View RelatedJust got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast. WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync. I used to have an espon 2400 which worked just fine.
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
Just purchased Adobr Photoshop Lightroom 4. Like the new replacment software having changed from Photoshop 7. But I must change the monitor color of BLACK to some lighter colour.
View 1 Replies View RelatedI've been working with a copy of lightroom 3.6 on a windows 7 machine. The problem I'm having is that I have a really hard time telling at a glance which images have the blue color label from the unlabeled grey ones. Is there any way for me to change either the background color of the filmstrip (like you can the background of the main workspace) or else change the hue/tone/saturation/whatever of the blue color label itself?
I know how to change the name of the label, but that doesn't visually differentiate between the two colors. The monitor is color calibrated, and I have the same difficulty on various monitors, so this is a physical limitation of my own, or a limitation of the program.
I recently decided to use LR to catalog all my images (instead of Bridge). I love that PNG is now supported. Ran into one problem...all the snowflake and white frame images are viewed as a white rectangle due to the background white. I know Preview and other "viewers" don't have this issue. ACDSee has a setting to change the background. Can I do this in LR5? If not, is there a link where I can submit for a product enhancement to the Product Management team for a future release of LR?
View 3 Replies View RelatedI cannot see Lightroom 4 - black background not good. Need larger font. Right now, useless to me. How to change background color and font size?
View 1 Replies View RelatedI am taking macro shots of flowers. I am using black mount board as the background color, but it always comes out as light grey or bluish. The flowers etc. are fine.how I get my image background to the color I want, in this instance Black
View 3 Replies View RelatedIs there a way in LR4.1 for me to change the background color where the top text is displayed on thumbnails in the library? Currently, mine appears to be light (or medium-ish) gray, with the first line in black and the second line in a gray that's very hard to read against the slightly lighter gray background.
I"d like to either make the second line text black (like the first line) and/or the background lighter so it's easier to read both lines.
How 2 color printing and 4 color printing will work? What are the designing conditions for 4 color printing and 2 color printing?
View 4 Replies View RelatedWe print out spot color seps every day using CorelDraw X4. After we print out the plates, I have to cut down the vellum that we print on so that we do not have a bunch of extra blank vellum on the sheet.
We make use of the info that is printed on the lower left of every page where it states something like the following:
S:DirectoryWhereTheArtworkisLocatedfilename.cdr
Wednesday, December 23, 2011 8:00 AM
Plate: 1 of 3
After I cut down the sheet, I then have to hand write the name of the spot color onto the sheet of vellum in marker.
Is there any way at all, to make it so that CorelDraw would actually add the name of the spot color that is printed on each page to the information that is already being printed to the lower left? Ideally, it could be placed in the same area where it's already printing the plate information on the last line.
Could it read:
Plate: 1 of 3 Color: Pantone 375
How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies View RelatedNo problem when printer manages color. 1-hour photo service was fine also. Printer color management is turned off, in fact greyed out. I tried different papers and icc profiles with same results. CS5, Mac OSX 10.8.3, Canon Pro 9500 Mark II.
View 10 Replies View RelatedI'm having big issues trying to get a .SID picture to plot. The .SID shows up in the print preview page, but then never makes it to the plotter.
View 6 Replies View RelatedWhen using Photoshop CS, I've arranged text on a white background and saved it as a variety of file types (.jpg, .tif, .psd, etc.) and used RGB and CMYK color profiles. On screen it looks correct but when I print it, it comes out with a tan colored background. I've tried both a large scale plotter and a small color laser printer and get the same result.
View 2 Replies View RelatedI have a trouble with my photoshop background and i don't know what...
When i create a document in my photoshop cs3 with white object or white background, when i print on my laser or ink jet, it print with maybe 1 or 2 percent of red...i try in rgb or cmyk but it's the same thing.
I'm attempting to tilt this image for use in a game im writing. I've been using Map Object and rotation (Y) but this then causes pixel color changes on the boundary with the background color. How would I tilt this picture without getting the problem?
View 4 Replies View RelatedIs there a way to change the color of the Vignette to match the page background color. It appears to that only Black is available at this time.
Is there a transparent vignette available anywhere .
You know how when you're painting, you can hold ALT and it will pick a colour from the canvas? Well, for some reason, mine still picks up the colour but it sets it to the background colour instead of the foreground colour.
And when I actually select the colour picker tool, it will only select the background colour but when I hold Alt, it selects the foreground colour. Basically it's flipped where it's supposed to select.
When I have any kind of layer, and I want to change the foreign or background color (with the color picker) I just cant. When I click on the foreign or background color it automatically selects the eyedropper tool, and I don't want this to happen.
View 1 Replies View RelatedHow I choose a color for any new objects I want to create. I've opened the toolbox with ctrl-b, which appears on the left side of the window. If I want to , for example, draw a red rectangle, I use the rectangular selection tool, then the bucket fill, and I don't see how to change the foreground color to red.
I've read elsewhere in the forum that there should be two rectangles somewhere on the screen that show foreground and background color, but I don't see them anywhere.
How do I outline an image so I can change the background color without changing the image color ?
View 1 Replies View RelatedIn photoshop elements 11, in a photo collage, in graphic tab, how do i change the background to a color in the color wheel?
Same thing for the graphics, i only have 6 choices, i want to add a graphic stored on my pc or other ones in the program.
In photoshop elements 11, in a photo book, page 2 and 3 are stored as one image, and have to have the same background color, and layout, how do i change that?
For some reason, when I am plotting on some drawings, the HP Designjet 5500 is printing out a tan background. I've tried copying and pasting into a new drawing, which has fixed it before, but not this time. I'm using Autocad 2008. 20120919_143304.jpg
View 2 Replies View RelatedEvery time I pick a color either via eye dropper or the swatches tab, it sets it to my background color. It use to set it to my foreground color. How do I change this?
View 2 Replies View RelatedI created an image in PS and then went to Dreamweaver to code. I wanted a certain cell to be the same color as the image I created in PS so I set the cell to the same hex value as the one in PS.
When viewed in a browser though, the color is different.
Why?
What do I need to do to make them view the same on the web by using the hex value?
I have an Imac with Mountain Lion, CS5 and have just replaced my Epson R2400 with an R3000. Now the white background round the image is covered in small cyan and light grey dots. If the image fills the paper, then the margin is affected. But when trying to proof colours I am going through loads of paper as I cannot now print a smaller image on a larger piece of paper, then re-feed the same sheet through with another small image as the paper is now pale blue.
The R2400 was fine for proofing, as the image alone would print and then the printer fed through the remainder of the sheet without printing, leaving the rest of the paper white. I understood from that , that it was most likely a Photoshop issue and some sort of conflict with the Paper profiles. But, I have checked the profiles on my Mac and they are all version 2 profiles. I note that the few profiles that do work without the blue colour do have 'bkpt' in their profiling and that the ones for the paper I actually do use and in fact the majority of the profiles, do not contain 'bkpt'.
I'm running Mac 10.7.5, with Photoshop CS5. My printer is a Brother MFC-J435W. Until just recently, I've not had any problem printing anything. But a few days ago I can't get the printer to print in color off of Photoshop. Any other program (LibreOffice, Preview, etc...) it prints color images just fine. But all Photoshop documents for the past week have been coming out black and white. I've checked and double checked all the Print dialog settings, and they're all set for color. Puzzled and annoyed does not accurately express things..
View 2 Replies View RelatedI use Corel to print name tags and sublimate products. I upgraded to X6 from X4 and now none of my colors print as previously set up. I am using the exact same printers, materials etc. The only thing that changed is the version of Corel. I tried the various color profiles and palettes available with no luck. How can I get my colors to print like they did from X4??
View 17 Replies View Related