Lightroom :: 4.1 - Keyword Count Incorrect
Sep 2, 2012
I have Lightroom 4.1; 64 bit; Win7. All of a sudden my keyword list is not showing the correct number of photos to which a particular keyword is attached. It doesn't show any for some when there are a number photos with that particular keyword (although it also does not show "0"). For other keywords, it dispolays a number but it is incorrect (apparently always a lower number than actually applicable. I do not seem to be using a filter that might reduce the number.
View 3 Replies
ADVERTISEMENT
Aug 17, 2010
Long, long, keyword hierarchy. Clicking on a keyword takes the focus back up to the keyword filter box. Usually happens if I've used the filter box to narrow down the keywords that are visible. Continues even after the filter box has been cleared. Doesn't happen all the time though. It is a real pain when trying to double click a keyword to edit it as the first click or the double click causes the list to refresh showing only the top entries. The second click (of the double click) then causes whatever keyword is now under the pointer to be keyword to be edited - NOT the keyword under the pointer when I started the double click.
I've seen this happen in both LR3.0 and LR3.2RC.
Windows XP, 32bit.
View 4 Replies
View Related
Jul 5, 2012
I'm new to LightRoom and am glad to have found this great resource. Onto the issue at hand:
An ongoing office project is using LR3 to catalog 30 years' worth of images gathered from various media. Some are scans of slides, negatives, or prints; others are images straight from a digital camera. We have three people working on this cataloging project. The lead guy has created keywords on his computer that he uses to tag these images. Is there any way to make sure the keywords he's using on his machine sync with and are available to the other users of the image catalog? If not, is there a file that would have to be shared among the three users to make that functionality happen?
View 1 Replies
View Related
Jan 2, 2014
Lightroom version: 4.4 [891433]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 4
Processor speed: 2.6 GHz
Built-in memory: 6087.8 MB
Real memory available to Lightroom: 6087.8 MB
Real memory used by Lightroom: 523.6 MB (8.6%)
Virtual memory used by Lightroom: 551.5 MB
Memory cache size: 1012.7 MB
Maximum thread count used by Camera Raw: 2
System DPI setting: 106 DPI
Desktop composition enabled: No
Displays: 1) 1600x900
If I am in Library module, select filter Metadata, select Keywords from dropdown (no other filter panels selected), and start to scroll down the list of keywords, I can select keywords by mouseclick, and see the matching photos as thumbs in the main window.
However as I scroll further down, I can no longer select keywords - the mouseclick no longer highlights or selects. This happens rather incosnsistently - by which I mean, the point in the eyword list where the select stops working is not always the same place in the keyword list.
If I click several times on the same non-selecting keyword, LR4.4 jumps to taking 50% (exactly) of processor time (shown in task manager) , and the memory usage climbs steadily until all free RAM is consumed.
This is a small (~8000 image) catalogue, with ~2500 keywords, entirely non-hierarchical.
The catalogue is set to optimise on backup, weekly.
I've tried deleting and recreating the preferences file btw to no avail
View 2 Replies
View Related
Mar 12, 2012
#LR4 catalog:createKeyword creates a keyword inside another keyword even though the 4th parameter (parent) in the call is nil. LR3 API doc says .. 'nil to create at the top level' and thats how it worked. Looking forward to LR4 SDK documentation.
View 1 Replies
View Related
Sep 2, 2013
I have used multiple versions of Lightroom (2, 3, 4, and now 5). Why can't I add keyword tags to multiple photos? I know that it can be done while importing, but I usually import a whole day's worth of pictures at one time and they don't require all the same keyword tags. The ones that are common I do add during import. I used to be able to highlight the photos I wanted to add tags to, go to the metadata and find find the list of keywords applied to those photos. Tags that were not common to all photos has an * beside them. If I wished to have one of these tags for all the selected photos I just removed the *, otherwise I added the new tag to the list.
View 2 Replies
View Related
Jan 10, 2014
When I check properties the file count in Photo Elements 12 is different than that of Lightroom 5.
In one case Photo Elements shows 743 files and 51 folders and lightroom shows 734 files. I counted each a every file and found Lightroom to have the correct count and Elements the same count but properties shows a count of 743.
View 1 Replies
View Related
Nov 2, 2013
This is from an online tutorial and is a typical view of the Library Filter. Notice that there are photo counts to the right of each of the search criteria. For example, All (2 Cameras) - 487 photos. Canon EOS 5D - 404 photos, etc.
Now notice a screen shot from my iMac with Lightroom 5.2 on OX 10.9 Mavericks.Notice that there are no photo counts after the search criteria. WHERE DID THEY GO? Or for that matter, were they ever there in this iteration of LR?Incidentally, I am aware the count will appear in the filmstrip (see the next photo) but that is not nearly as useful.
View 14 Replies
View Related
Nov 27, 2013
In LR4 the Library Filters showed the image count in each category.
No longer shows in LR5.
Is there a preference I can change or is this just an oversight/bug?
View 2 Replies
View Related
Nov 23, 2013
When using the library filter on metadata no numbers are shown anymore, even not after clicking restore default presets?
View 2 Replies
View Related
Apr 20, 2013
I converted 5D Mark III Raw files to DNG with Adobe DNG Converter 7.4. When I import the DNGs into LR I noticed that the total pixel count has been significantly reduced. The original Raw images are 22 megapixels (5760 x 3840), the DNG files are 10.5 megapixels (3960 x 2460). I tried it without lossy compression, and with Lossy compression (making sure preserve pixel count was selected). Either way the image's pixel count is reduced. How do I avoid loosing half the image?
View 10 Replies
View Related
Sep 25, 2012
Had a problem with my RAID1 HD's and windows 7 went to check and repair my HD. There were some things with indexes, related to lightroom fixed. Kind of logical as I was working in Lightroom when the problem occured.
After restarting Lightroom 4 refuses to open my catalog. It states the catalog is not writable and cannot be opened, could be because of incorrect permissions. Strangely enough, although I run a backup weekly there is no backup folder on my HD, or better said only a backup folder with a file that's a couple of years old. No use. (should have checked this earlier... obviously)
How to get my catalog back up and running again? I can open Lightroom with a new catalog, but then I've lost a lot of work...
the basics: Windows7 home premium, Lightroom 4, catalog on internal HD which is in RAID1 (mirror), lightroom programme on SSD
I have all the permissions (administrator), catalog file is not 'read-only', run as administrator did not make any difference.
View 5 Replies
View Related
Nov 7, 2013
I think that "treat '.' as a keyword separator" checkbox on the preferences window does not work as expected.I want to create keyword hierarchy with this option when importing, but Lr does not separate keywords entered with dot between them.
View 5 Replies
View Related
Jan 31, 2014
I've mistakenly included a keyword phrase that appends to my images.
How do i delete them?
2nd question: is there a keyboard shortcut to to open the Catalog-->All Photographs window?
View 3 Replies
View Related
Apr 1, 2014
Time and time again, I have come across the issue where the thumbnail being displayed in the grid view and loupe view is not of the image itself, but of some other image. So far, the thumbnail is typically from the same folder or collection and can be either from an image that still exists or from one that I've rejected and deleted from disk previously.
If I go into develop mode, the correct image gets displayed, but the thumbnail rarely resets itself.
I've deleted the cache on previous occasions to have LR recreate the thumbnails, but I never know when I'm going to encounter this issue.
This becomes a paint when I am delete unwanted images. If the thumbnail is incorrect on my second or third pruning, I could actually lose an image I intended to keep.
I'm running Lightroom 5.3 from CC.
It seems that deleting the cache every day--maybe even several times a day--is a bit overkill, but seems to be the only way to deal with this problem.
View 2 Replies
View Related
Mar 3, 2011
I have Lightroom 3.3 on a Windows 7 x64 machine. It's started to throw a disk critically low warning every few days for the drive that has my LR catalog on it. The drive has 390GB free .
View 15 Replies
View Related
Dec 12, 2013
When exporting an image and specifying to resize 1500 pixels on the long edge I get this result 2541 x 1500, which is exactly the same result when I specify the short edge. I have tried this with cropped images and with uncropped images.
View 3 Replies
View Related
Mar 22, 2012
In Lightroom 3.6. I am having difficulty with the photo date in the thumbnail. I had a series of pictures with incorrect dates in the metadata and I used Microsoft Photo Pro to correct the dates. The metadata is correct in the file and shows up correctly in the Metadata group of the right side panel, but some of the thumbnails show the date of the changed information rather than the Date Created. When I told it to "Read Metadata from disk", only the first file shows up correctly in the thumbnail. The others show today's date, which was the date that I made the changes to the files.
View 9 Replies
View Related
Feb 6, 2012
My wife's library has over 30,000 photos in it. We've started developing a problem where the images in Library View are all the exact same photo, even though it's nowhere close to being the same image.
[URL]
you click on a date and the thumbnails load, but as you click on the image, it pauses and then shows you the real image in the Navigator (in this screencap, the image has not yet refreshed in the navigator).
i tried rendering previews, but it didn't fix the problem (after hours of the processing). I've rebuilt the catalog when moving to a larger harddrive, but I don't want to reimport everything to a new catalog because i don't want her to lose her edits to her photos. i'm not entirely certain if "Optimize Catalog" will fix the problem.
LR3.5 on Win7 Laptop with 8Gb of ram and a 2.5 i5 processor
View 1 Replies
View Related
Mar 29, 2014
I have one Lightroom catalog and i use 2 external drives that I work with. I've assigned fixed drive letters to both E: and F: I've recently upgraded to an SSD - cloned my entire HDD but now Lightroom shows the content on the 2 external drives swithced around. The folders that are physically on drive E: show as if they shoud be on F: but with the missing icon next to them. And vice versa, the ones that are on F: show as if they should be on E: with missing icon.
View 1 Replies
View Related
Feb 7, 2014
I like to organize my photos by date. When I import my photos through lightroom 5, I specify in the metadata to organize by date, (in which it is listed correctly) and choose the destination folder. However, once I perform the import, it creates a completely separate folder under the year "2012". How can I fix this problem to import under the correct file dates?
View 1 Replies
View Related
Aug 14, 2013
Right click > edit in > merge to HDR Pro in PS and tone mapped 32 bit HDR file with the ACR in PS. After saving the file, I can not get the correct preview in LR in the develop module ...
View 5 Replies
View Related
Jun 4, 2012
Can add the "keywording" panel in the Develop tab?
In my workflow, I rate or tag a photo only after I've made some PP adjustment. So, my workflow would flow better if the "keywording" tab resided in the Development tab as well. Is this possible? Can you add a panel from another tab?
View 5 Replies
View Related
Apr 10, 2012
Lightroom LR4 - very slow Keyword set updating 1] keyword an image with some keywords from a keyword set. Those keywords are highlighted in keyword set 2] select next image 3] wait about 4 to 5 seconds for highlighted keywords to be non highlighted.he problem with this, is that yo cannot use the keyword set to apply these keywords to the newly selected image until they are not highlighted any more.
View 4 Replies
View Related
Oct 15, 2012
I have searched my entire library for a particular keyword. The results are onscreen now and number several hundred shots. I now want to show just the jpg versions and ignore the cr2. Can I filter the results somehow?
View 1 Replies
View Related
May 10, 2013
I've built up an extensive heirarchial keyword list in one of my catalogs. I want to export that list to use in other catalogs. I see how you export the keyword list and I get a text file, however, settings applied to each keyword doesn't seem to get exported (i.e. the settings for "Include on Export", "Export Containing Keywords" and "Export Synonyms"). I spent a lot of time building the list such that only the leaf-level keywords get exported to my image. However, when I export my keyword list from one catalog and import it into a new catalog, those settings are lost. Is there a way to export those settings as well? I could create keyword sets, but that would be another time consuming endeavour.
View 3 Replies
View Related
Dec 15, 2013
Using a keyword search "contains all" brought up photos of pictures in which that keyword was not applied to them. I selected these photos and the keyword was not associated with the photos.
View 2 Replies
View Related
Feb 13, 2013
How an I save the lightroom keyword hierarchy to the JPG?It seems that the metadata flattens the hierarchy and saves each node in the hierarchy. I had thought that LR would store with pipes between each node.
Is there a plug-in method to accomplish what I wish to do?I have no desire to preserve side-car files.
View 8 Replies
View Related
Aug 12, 2013
My department is making an overhaul on our keyword usage and we want to figure out which keyword tags have been used the most and which ones are rare and uncommon. Is there a way to export a spreadsheet and/or view the keyword statistics?
View 3 Replies
View Related
Apr 7, 2013
I have shot a sport tournament last weekend and when importing the photos, amongst others, I used keywords "Day 1", "Day 2" and "Day 3". I wanted to work on the photos of Day 3. When I entered "Day 3" in the find box, days 1 and 2's photos also appreared. I jumped on the net and read on a site not to use spaces. Question: How would you have tagged Day 1, Day 2 and Day 3 in the key words?
View 3 Replies
View Related
Jul 31, 2012
as I've come from PSE, the terminology might be a bit different.
1) Displaying Keywords for a photo - In PSE, the properties panel can list all the Tags associated with a photo. The only way I can see the keywords for a photo in LR is to go to the keywords list, expand all the sub levels and look for check marks. Is there a simpler/easier way?
2) Displaying a photo for a keyword - I have a keyword which has a count of 1 against it. If I try to filter by that keyword (by clicking the right arrow next to the count) nothing is displayed. I tried making a collection with just the keyword specified and it contains one photo but again nothing is displayed. I suspect that it might be something to do with version sets brought over from PSE but I've tried unstacking everything and still can't find the photo.
View 8 Replies
View Related
