Illustrator :: Get Multiple Tiles To Appear On Large Piece For Printing?
Sep 12, 2012
I'm working in Illustrator 6. I've got a large piece that I'd like to print onto several 11x17 sheets. When I select Veiw---Show Print TIling, only one tile appears. I expect there to be enough tiles to cover the entire piece and be numbered for me? Where are they? How do I get them to appear?
Then when I go to Print the tile option in the print dialog is greyed out.
I know I've done this before in earlier versions.
View 3 Replies
ADVERTISEMENT
May 24, 2012
Im working with Autocad 2012, havent done much with 3-d modeling. I have a model drawn and I simply want to print it with the top, front, right and an iso view on one piece of paper.
View 2 Replies
View Related
Jan 30, 2014
I have a large project (shirt block pattern) that I need to print as a poster, I'm wondering if there's any way to add a border around each tile when printing, since I can't print to the edges of the paper it would save me having to draw in each border before cutting (to ensure I don't cut the edge crookedly).
View 3 Replies
View Related
Jan 18, 2013
I have been working on redesigning a brochure based on a previous year. I updated all the images and text and sent it off to the printer the way it should look. When we got the brochure back, it had picked up an image that I never saw while working with the file. The printing company says the image was embedded in the file and appeared all along to them, but I cannot find any trace of it in my file. I have searched through every layer item by item to try and find it but it remains a mystery. I want to make sure that it does not appear in future prints of the file.
View 9 Replies
View Related
Jun 13, 2010
I have some large images that I would like to print at full size, which will involve tiling across multiple sheets of paper. I can't seem to find a way to setup tiling at the Print dialog or through Gutenprint.
View 3 Replies
View Related
Jul 13, 2012
I am trying to generate A4 tiles of a large banner (13m x 3m).
In the layout mode, I can't seem to get the image size to be set at 100%. If I manually set the image size to 100% and click on apply, this drops back to 38%. 38% is the highest it seems accept.
Is this a limitation with CorelDraw? Is there a way around this?
View 2 Replies
View Related
Jan 7, 2009
how I would lay out my photos to be printed onto tiles.
For instance, printing a photo, to be printed onto 9 4" square tiles, to be placed together as one large tile mural on wall or as backsplash, that would be 12" x 12".
How would I go about 'cutting' the photo in 4" squares and pulling them apart, to get the look I want?
I just upgraded to CS 4,
View 6 Replies
View Related
Aug 21, 2012
Using CS4 on XP.
I recently did a tutorial as I wanted to learn how to make vector backgrounds (for large printing purposes and to save on file size)
I was wondering if this particular tutorial I did can cause the banding when professionally printed.
This is the link: [URL]....
What it is is simply making a shape with a gradient. Adding a solid color rectangle behind that shape, Selecting the shape and rectangle and creating an opacity mask. This creates a nice blend effect and I hope it looks as smooth on screen as it does in print.
Dealing with this situation of "banding", what worked for me is adding a curve layer to the top of my layers and adjusting the sliders all the way to the right in order to see on screen the "banding" more clearly. Is there a way to do this in Illustrator? They also recommended designing in 16-bit, however I think these graphcis I will be creating are very large (for booth displays) and I imagine the file would be outrageous in size.
View 10 Replies
View Related
Sep 1, 2013
How do I send a large Illustrator CS3 file to a client that needs it for printing?
View 8 Replies
View Related
Mar 10, 2013
I am looking to create a collage made from 100 photos (all taken high res) to be printed large, approx 120cm x 50cm. To be able to print this size I need to keep the high resolution and hence looking for a large file output.
View 1 Replies
View Related
Jun 11, 2012
I am currently doing a project for a company and I am learning autocad at the moment. The company wants me to print out the drawing on a big piece of paper at KINKOS (I think 4ft by 6ft or something like that). I am using AUTOCAD 2012 and it the drawing is a floor plan.
View 9 Replies
View Related
Aug 26, 2012
I am creating a poster in A1 format. My printer can only print up to A4, so I would like to break up my poster into 8 A4 pages to print a preview before sending the doc off to the printer.
View 4 Replies
View Related
Sep 12, 2012
If I have a pair of uv tiles in u1v1 and u2v1, How can I import an image for both multiple uv tiles?
Now when I select "import layer", the image only show in the position of u1v1, but not show on both area.
View 3 Replies
View Related
Oct 10, 2013
As part of a study project, I have to describe the steps of assembly of a product (a car within a factory) with a series of drawings.
I've drawn them in the model tab, having each step of the assembly in a separate "tile".
My problem is that when I want to print these drawings in a pdf file, it takes me ages because I have to select and print each drawing separately (plot, select window, print for 40 drawings is very long).
How to be able to print these in a more "automated" process ? I've tried to put them in "layout" but I cannot manage to adjust the drawing to the print zone, on the page (like what you would do when selecting the window before printing with the "adjust to the page" option).
The scaling is not a big deal at this step, as long as all drawings have the same scale (all tiles have the same dimensions).
View 9 Replies
View Related
May 28, 2013
so when I print multiple artboards only the first artboard prints correctly and the rest don't get rotated to fit the media so art falls off the page.
it all shows up fine in the preview. this only happens when printing multiple pages, if I print 1 at a time without changing settings it prints fine. this also only happens in illustrator cs6. I have cs4 installed and it prints fine.
View 1 Replies
View Related
Nov 14, 2012
I need to create a file with multiple color swatches from the Pantone Library. For instance, the whole lot of BLUES. I am using Illustrator CS6. Is there an easy way of doing this & how would i go about doing so?
View 3 Replies
View Related
Dec 9, 2013
I've got 2 artboards in the same document:
4 inches Wide x 1 inch High.
I need to print them in the same 8.5"x11" sheet.
I need each artboard to print out with their individual crop marks..
CS5
View 4 Replies
View Related
Apr 30, 2013
I'm working at a screen shop, printing .ps files for film. Most of the art is provided from the client on seperate artboards of varying size. In the print dialog box I select "custom" from media size options. This sets my page size to the size of the selected artboard. The problem is each page needs to be a different size so I am forced to print each page one at a time. Is there a way for illustrator to change the media size per artboard?
View 1 Replies
View Related
Mar 21, 2014
I was editing my largest project to date (I'm still well a novice) and once I needed to remove a middle portion I realized how in the heck can I slide the remainder entire timeline to fit the gap? I tried the slide tools, hand tool, and the track select tool. I know host to highlight the remainder of the timeline.
View 3 Replies
View Related
Aug 15, 2009
I created a pattern tile swatch, and am certain that the edges are perfectly matched. However, when I fill an object with the pattern, on the monitor there appear to be vertical seams. If I zoom in very large, the seams go away, and they do not print. Is this just an artifact of the monitor or should I be concerned that the seams will appear if the illustration is posted to a web page?
View 4 Replies
View Related
Mar 8, 2013
It seems as though having this option in the Preferences unchecked is the default. I work with pattern tiles a lot and I ALWAYS want them to scale and move etc... with the object they're applied to. Every time I open an old file (from a previous version of AI where this option was checked) or start a new file, the option is unchecked, and I've really messed up some art when I've edited without realizing my pattern tiles aren't following along.
How do I make this option persistent? I always have to go in and check the damn little box before I can make any edits. BTW, I'm using AI CS6 through the cloud, so I should be all up to date.
View 4 Replies
View Related
Apr 23, 2013
I think I am having trouble with how a certain system font displays in Illustrator. I am not sure which font it is. Why I am getting a swatch list that looks like this:
All these "mystery" swatches are associated with a piece of artwork that was obtained from a stock image website.
View 3 Replies
View Related
Oct 10, 2012
I am asked to do a large print of an A1 size poster which is 840mm x594mm,so would it be wiser to half those dimensions given,or even 1/4 of that size in order to avoid my maching going slow? would the printer still understand how hes meant to go about,if i specify the actual dimensions?
View 2 Replies
View Related
Jul 16, 2003
If you had to work on a portrait (ie, change a background) and print it at 16x20, what size and resolution would you work on it at?
A 16x20 picture in photoshop @ 300 or even 200 dpi would be quite large, even without layers. I'm just trying to get a good idea of what I should be scanning at, I usually work on images at around 8x10 & 300 dpi.
View 2 Replies
View Related
Aug 10, 2008
I need to design a large logo for a billboard ad. The dimensions are about 14'x6' I spoke with the printing company and they weren't all that helpful about DPI & such. The most info I could get was that they print at 150 DPI, and if I wanted to make my image smaller they will scale it up.
it's a very elaborate pixel based graphic that I don't want to be distorted when blown up. So, I've been trying to design at the literal dimensions of the sign, and 150 pixels/inch (in CS3). Problem is that I'm getting all kinds of scratch disk errors (even with 250gb free) and excessively long wait times between modifications to the document.
Is there any smaller size I can put this document to or anything I'm missing? I realize that I should be using a vector design, but the person I'm doing it for is very set on an elaborate pixel design with tons of detail.
View 1 Replies
View Related
Jul 13, 2012
I have received permission to use the attached logo (1st image) on a business card for a project.
I want to place it on a blue background, so I've copied the type in Illustrator switched the colors so everything can be read against blue and worked well. However, I can't seem to get whatever file type I place of the shield in Illustrator (tiff, jpg, gif) to not have white pixels around it. You'll see what I mean in the attached 2nd image.
I made a selection of the shield and then did a layer mask of the rest of the logo. There are some extra pixels but some are so small that I don't think I can get them all. I've tried placing the logo in InDesign too and there is the same issue.
View 10 Replies
View Related
Jan 3, 2013
I am in the process of creating a large( 10 feet by 3 feet) sign for a hockey arena. I am having trouble saving it as an eps file, which is what the printer has requested, without distorting or completely changing the effects? I am using photoshop cs5 on Mac os 10.6.8.
View 1 Replies
View Related
May 29, 2013
I have this photo here as an example and its specs are:
2200 x 2134 px 300 dpi
cm 17.8 cm 18 cm
if I was asked to do a large banner for example 10 meters x 10 meters(i'm converting 10 meters to pixels and I get :37795.275590551) to go on a building wall.the fact that the photo is 300dpi would that be efficient enough to get a good result without pixelation? or do the pixels within the image need to be even more to secure a better print? if the pixels were double the amount would that be more efficient for example 6000 pixels x 6000 pixels does that secure crystal clear print? I read in various forums that the distance would also play a large role,in order to set the resolution value.
View 6 Replies
View Related
Apr 8, 2013
Not sure how to search for this. I will ask my question. Using PS CS6 need to create at photoshop image to print on a large banner 10' x 12' How should I go about setting up the file...should I create to actual size? should I set up for 72 or 300 DPI? Should I create at a smaller size in order to NOT take up so much hard drive space and then allow printer to enlarge.. and if so how do we NOT get the pixelation when going from small to extremely large? Is there a file that can be save as (PDF.. TIFF) that you can enlarge indefinitely like a EPS?
View 4 Replies
View Related
May 7, 2011
I'm using Corel X3 graphics. Windows Vista. HP officejet pro 8500a premium printer. I'm trying to print a file I used to print all the time. It's a map with bitmaps. I must have accidently changed some settings in CDX3 because now it prints too large--it won't even fit on the page. I've tried changing every print setting that relates...Fit to Page, etc. I also restarted corel while holding down the F8 key to reset the factory defaults. I've re-installed Corel 3 times! I'm at my wits end.
View 8 Replies
View Related
Jul 30, 2013
My plans are printing fine, but elevations and any 3d view print with the majority of the drawing missing. I'm guessing it has to do with the raster images used on walls for textures, but besides that I'm stumped. I'm trying to print in realistic view, because of the material textures that need to show up.
I've turned on sun lighting, as well as tried various PDF printers, but no change. When I go to the print preview it appears to preview incorrectly. The file is pretty small as the project is just a modest house. Pretty much all the settings are 'right out of the box'.
When I shift back to just 'Hidden line' mode and look at it in print preview it seems to print the drawing fine, but then the titleblock and firm logo dissapear. The actual PDF when printed is fine.
I'm working on revit 2013, in WIndows 7 inside parllels on a macbook pro.
View 1 Replies
View Related
