I export high res TIFFs and PSDs a lot from Illustrator. One option is EMBED ICC PROFILE. I'm going to PS to build my composite. When should I embed the profile, and when shouldn't I?
When I open in PS, even if I don't Embed, doesn't PS know what colorspace the doc was created?
While exporting the document as jpeg, through File->Export, there is an option "Embed ICC Profile" as figure shows.
How to set it if I am exporting the document through my program in which I rasterize the document and used the sAIImage->AsJPEG(raster, jpegDataFilter, params); I didn't find any option in AIRasterizeSettings or AIImageOptJPEGParams to set this flag.
I'm trying to convert Excel graphs into high resolution tiffs. I am saving the graph as an .eps file and opening it in Photoshop. This worked for a few graphs, then all of a sudden Photoshop started opening the .eps file such that it was shifted and only part of the image was showing up (the rest cannot be seen and is just cut off).
View 3 Replies View RelatedI was designing a Business Card using Illustrator and after finish when I was trying to save the project like an .eps with High Resolution the program didn't work and gave me an error "Stopped working" , I tried again and the same happened..
View 1 Replies View RelatedArtwork is done at 5x7in, i want to export this as a PNG for print purposes however the more i increase the ppi the bigger the pixel size. I want to export it at a high resolution but keep the pixel size to 500x700.
Is this possible?
Currently to achieve the 500x700 pixel size i change the ppi to 104, if i switch off anti alias then its fine for straight lines and shapes, however if i have a line or shape at an angle it gives these shapes a jagged edge!
why my drawing on illustrator won't export at maximum resolution when a nearly identical drawing can.
View 2 Replies View RelatedWhen I scroll over an image, the rating shows - "unrated". How do I embed an ICC profile so that it shows up as CMYK?
View 5 Replies View RelatedBut I have and EP3 and am using Olympus Viewer 2 to manipulate the RAW images, I then edit the TIFFs in PaintShopPro 4. I have also calibrated my Dell 2410 with SpyderPro4.
My challenge is that the image edited in OV2 looks very different when viewed in PSP 4. I think the issue is that OV 2 is embedding a color space of "sRGB IEC61966" not the profile I set up using Spyder (as shown in the information screen of the resulting TIFF). when I open PSP it then says it is converting the "sRGB IEC61966" color space to my Spyder profile.
I have set OV2 to use Color Management and to "embed profile when saved". The monitor profile selected is my Spyder profile. Is this a bug? Is there a setting I should use in PSP4? Or si the problem on OV2?
LR 4.3, Windows 7. I've started using Snapshots as a convenient way to capture in-process images. But, I can't find a couple things I'm sure HAVE to be in here somewhere...
1. The "generate virtual copies from all the snapshots of this image" button
2. The "export all the snapshots to jpgs or tiffs or whatever" button
I have a set of JPEGs that have been stripped of their color profiles (AdobeRGB). Lightroom assumes that they are sRGB images and displays them incorrectly. Is there any function in the program that will let me embed the correct (AdobeRGB) profile to the photos, preferably without re-compressing them?
View 12 Replies View Relatedembed,export my work to my own website? I have a slideshow I made and want to show on my own website
View 1 Replies View RelatedI want to upload a new logo I've created as a Twitter profile image. I can export the logo as a JPG but what image settings should I use when I save it?
View 3 Replies View RelatedI have been contracted by a customer to remake a logo of theirs. Like always it should be a vector file so they can scale it and print it resolution independent. The problem is their logo includes some effects (pillow embossed text and graphics) that are much easier done in Photoshop. So I'm left with the option of manually creating highlights and shadows (drawing a line then using gaussien blur)in illustrator to imitate the photoshop pillow emboss.
I was wondering if I placed a photoshop image in illustrator and saved it as an eps or ai if screen printers and other printers that require a vector file be able to use it or if that wouldn't work at all. I also know that there is a way to save photoshop eps. However when I try to do that with this logo that option is not available. I am using Photoshop and Illustrator cs5 on mac OS 10.6.8
I'm making large prints (40x60) from Illustrator files, and the print plugin requires Photoshop. I am converting the AI file's Document Color Mode to RGB, then exporting to PSD as high-resolution 300ppi, using artboards.
When I export the AI files to PSD and view them in PS, the photographic elements appear pixelated at 100% whereas the text & graphics are smooth and high-res. I've checked the linked photographic files, and they are not pixelated. So what I've had to do is export editable PSDs from AI using the "Write Layers" option, open the files in PS, and then re-place the photographic elements so that they are no longer pixelated.
FYI, Anti-Aliasing is set to Art Optimized (Supersampling). The AI and PS files are both sized to 40x60, and the PSD is opening as 300ppi.
I recently needed to reset my program prefrences for Illustrator CS6 (Version 16.0.0). In doing so, I have lost the option to embed a placed anything!
File > Place
The only options available are: LinkTemplateReplace ...Where did embed go? I could have sworn it used to be here..
I have a screen capture video which is 1024x768. I want to edit it and export as .mp4 in its same resolution--1024x768. You would think this would be easy, but it's grayed out. I tried Settings, create a custom export format and it was grayed out there too. How do I export my 1024x768 video as 1024x768 .mp4?
View 4 Replies View RelatedI have recently started designing brochures for my company. I completed 4. I am quite new as a designer.
all 4 printed well, had no problems.this last one, the printer gave the foll:
1. The is overprint issues on the pdf files.
2. Some pages the fonts are not embedded.
3. There is spot colours in the job.
it is 24 pages
I did not change my setting at all as from my previous brochures. So I am completely lost in how to solve it and not for it to happen again.We used the same printer for all the brochures.
Even the flyers I recently did, saying the same problems. Am using the same printer.
I have a lot of existing eps-files of which the option "embed all fonts" is unchecked. Know I have to check the "embed all fonts" in the existing eps-files. I tried to modify the script below, but it seems that the embedallfonts is NOT working.
When I do it manually (without script), then it works fine. With script, it doesn't work.
#target illustrator
// PART 1
var doc = app.activeDocument;
// PART 2 -> herbewaren eps als eps
[Code] ........
Another question will be: can I get a dialog box to put in the path to the eps-files, I can do thereafter it in batch instead of each time opening and closing a file.
I have started offering the option to buy high resolution pictures to cd. File Settings, Image Size, Output Sharpening - so many boxes and not sure which to check or leave unchecked A couple of the pictures I cropped to 4x6 but the others are all the original as I shot them.
View 3 Replies View RelatedI'm doing about 200 Illustrator drawings that come from a PDF document. I've created an action that resizes the placed artwork and moves it to the correct location on the artboard. I tried adding the "Embed Image" command to the action with no luck. Is there a way to do this with a script or shortcut?
View 9 Replies View RelatedI have been tying to figure out how I could easily embed multiple linked images easily. I have some 1000 .svg images which have about 1-7 .tif images linked in to them. I now need to get those links embedded and becouse of the amount of images I'm hoping to make an action out of it.
View 3 Replies View Relatedis there a way of exporting my AutoCAD drawings in high quality? Maybe Tiff?
The problems I have with exporting is that if export a drawing as a *.wmf the thick lines come out too thick even when using the 0.3 mm thickness. If i use the 0.25 mm thickness the lines are as thin as with the default thickness.
The contour lines of an image I imported into my AutoCAD drawing are coming all blurry when I export into wmf file even when using the 600 dpi resolution (highest available on the menu).
Inside my AutoCAD drawing my image map has a very high quality but when I export it, with AutoCAD polylines on top of it, the drawing comes out horrible.
I painted a blue polyline to represent a river in a contour map. This is for a civil engineering project. When I export the drawing, the polyline comes out too thick and the image behind comes out blurry. This happens even when using the highest definition possible for a wmf export (600 dpi).
I've read in another thread about a way of exporting into tiff. I followed the directions but the thread is not well explained. It doesn't say whether it is necesary to have or buy certain software. And it doesn't say what to do next to export the tiff drawing.
how to export high quality AutoCAD drawings?
how to export my images to a file on my computer in JPEG in a high quality for printing large prints? I have done several to e-mails and facebook. But struggling to figure out how to do it correctly for prints. I would like to submit them to a photo lab, but I am afraid I don't have the correct settings.
View 1 Replies View RelatedCS4 macbook pro
I can't seem to be able to emebd a tiff file.
Illustrator CS6 (all updates)
I have a simple, clean logo with a couple of compound paths (letters like the 'e', 'A'). There are no clipping paths. Everything works great in that file if I save it, re-open and edit it, etc.
If I "Place" or drag this file into a brand new, blank file, and then "Embed" the artwork, it creates 2 clipping masks the size of the artboard. More importantly, it messes up the compound paths so that I have to select them and use the 'Unite' shape mode to get it to function properly. I can see this by trying to add a stroke to the letters.. the stroke is broken until I use the Unite button. Even undoing the compound path and redoing it doesn't work. In the attached image, you can see how a corner is broken , as well as how neither 'inside' nor 'outside' is available for the embedded version.
I have been tying to figure out how I could easily embed multiple linked images easily. I have some 1000 .svg images which have about 1-7 .tif images linked in to them. I now need to get those links embedded and becouse of the amount of images I'm hoping to make an action out of it. I have a script to embed single image in .svg but haven't have luck with multiple embeddings.
View 9 Replies View RelatedExporting 25fps QTs using H264 1080i (10mbit) settings produces quick times that jump at the start and have strange frame rates (20.7 and 25.17).
View 5 Replies View RelatedI want to export my created Slide Shows made in Photoshop 7 to My Vidieos File on my computer c drive, but it seems that the only option I have is to send it as a WMV Movie file. However, this way loses to much resolution and as I want it transported at high quality, is there any way I can send it that way, say, as a mpeg formatt?
View 1 Replies View RelatedIs it possible to embed an image file embedded in Illustrator and save it to my desktop? I've lost the original JPEG, was relieved to find I'd embedded it in an Illustrator file, would like to extract it for use elsewhere.
View 20 Replies View RelatedI am getting black pixals that show up around my photo when I export to PDF High Quality Print and print. Some of my other photos have the pixals show up when I open them up in preview but they are white. How are you able to get rid of these?
Here is the image. If you click on it you will see the white pixals.
Each time I open a file in AI - CS3 I get the same message: "Missing Profile - The doc does not have an embedded CMYK profile". I looked in library>colorsync>profiles and sure enough they were gone? I downloaded new profiles from Adobe, installed them in library>colorsync>profiles - and still the same thing with each file I open. I dragged AI to the trash, re-installed AI from my disc repeated the process with the same results .
View 10 Replies View Related