Illustrator SDK :: How To Find Artwork / Layer Below Given Location Of Mouse
Dec 26, 2012Is there a way to find the artwork/Layer below the given location of the Mouse?
View 1 Replies
ADVERTISEMENT
Illustrator :: Can't Find Fit To Artwork In CC Artboard Panel
Jun 26, 2013In CS6, you could select the artwork, then go the the Artboard Panel, choose options, and then choose "fit to selected artwork" or "fit to artwork bounds." This resized the artboard to fit your artwork. In Illustrator CC, both options are absent in the Artboard Panel and "Custom" isn't there either. I can't find these options anywhere else. I am reopening files in CS6 to do this now. Can't believe they eliminated this feature. I use it everyday.
CS6 Version CC
Illustrator :: How To Find A Piece Of Artwork That Only Appeared At Printing
Jan 18, 2013I have been working on redesigning a brochure based on a previous year. I updated all the images and text and sent it off to the printer the way it should look. When we got the brochure back, it had picked up an image that I never saw while working with the file. The printing company says the image was embedded in the file and appeared all along to them, but I cannot find any trace of it in my file. I have searched through every layer item by item to try and find it but it remains a mystery. I want to make sure that it does not appear in future prints of the file.
View 9 Replies View RelatedIllustrator :: Convert All Artwork In Single Layer?
Dec 3, 2013In illustrator i design some artwork and now the total layers are about several hundreads. so now i'm about to combine all those artowrk layers in one layer, so that it will be a nice clean file with text layers that are to edit and one single artwork background layer.
View 9 Replies View RelatedIllustrator :: How To Navigate To Specific Location And Collapse Layer By Layer
Apr 25, 2009Every time that I open a file, almost all the layers in the first level appears expanded, even when the file was saved with these layers colapsed.
So, as I have a lot of layers and sublayers/groups, it is difficult to navigate to a specific location and I need to collapse layer by layer.
Are there some trick to force Illustrator to remember the layer status?
Illustrator :: Recolor Artwork From Black / White To Color Inside Recolor Artwork?
Dec 11, 2012In Recolor artwork is there a way to change the black and white colors to a color? When I try to edit them it doesn't edit them at all. It would be nice if I didn't have to manually tweak the colors to have color before I go into Recolor Artwork.
View 2 Replies View RelatedAutoCad :: Zoom To Mouse Location?
Aug 15, 2011I don't know what I did, but some how when I use the mouse wheel to zoom now, it only zooms in from the center of the screen, not where the mouse pointer is.
how I did this and how to change it?
Illustrator Scripting :: Find And Replace Layer Names
Mar 19, 2013Are there any scripts to find and replace layer names?
There is an excellent script available for Photoshop which allows you to not only replace words in layer names, but also insert words as Prefixes, Suffixes and Sequential Numbers. The illustrator version of this script only allows sequential numbering: It doesn't offer find and replacing of words.
Ideally, it would be great if there was something that could do multiple find and replaces in one go:
(E.g.
You have layers like this Car, Dog, Bat
You enter: car(Option1), dog(Option2), Bat(Option3)
Your layers then become: Option1, Option2, Option3).
)
AutoCAD Inventor :: Get Point Location Of Mouse Click Using ILogic
Mar 4, 2013I'm trying to get the point location of a mouse click in an Inventor drawing using an iLogic Rule. Any examples of using mouse events in iLogic?
View 9 Replies View RelatedAutoCAD .NET :: What Event To Be Used To Read Left Click Mouse Location All The Time
Sep 2, 2011I want to be able to read the left click mouse button coordination all the times . Is it possible ?
View 4 Replies View RelatedAutoCAD LT :: Incorrect Mouse Location / Change Page Layout Tabs
Jun 25, 2013I am having a problem with AutoCAd LT 2014 incorrectly locating mouse clicks with respect to the change page layout arrows. In order to reproduce this error you must have enough page layouts in a drawing to highlight the arrows (bottom left) which change the layout tab. Clicking on the right (or left) arrow several times consecutively will be incorrectly identified by AutoCad as a double click on the 1st page layout visible and will execute the rename feature. However the mouse pointer is not over that layout tab, it is clearly over the right arrow.
Why does AutoCAD read a clicks in this area incorrectly and register them instead nearly 30 pixels to the right.
Any work around as I commonly use the arrows to cycle through pagelayouts in drawings which have 50+ page layouts.
I have also noticed that AutoCAD will preview page layouts when hovering the mouse over the page layout change arrows, this reinforces the belief that AutoCAd is not correctly identifying the mouse position in that area.
3ds Max :: Where To Find Zoom Around Mouse Option
Mar 7, 2013where to find the "zoom around mouse" option is found - cannot see it under preference anymore.
View 2 Replies View RelatedPhotoshop :: CS3 - How To Locate Layer Your Artwork Is On?
Jul 22, 2008This has been driving me crazy since the new CS3 version came out. In the old days when I wanted to find the layer my element was on, I'd ctrl-click it (PC) and bang, that layer would be active. One of the most useful shortcuts ever invented...
Which is why Adobe had to go and screw with it. Now all that does is give you the folder, which is useless to me - I often will have 30-40 folders, those having many subfolders and many layers.
The lame replacement I have seen is "oh, click the palette icon of the layer" - which makes NO sense because *I don't know what the layer is* - that's the info I am trying to find out!
Photoshop :: How To Copy And Paste On Another Layer In Same Location As Previous Layer
Jul 19, 2012I'm trying to copy a portion of a graphic and put it on another layer while keeping it's exact location as to how I view it am I understanded?
View 3 Replies View RelatedPaint.NET :: How To Find Location On Image
Jun 24, 2011Is there a way to find a location on an image.? Let's say I have an image of 1024 x 768 and I want to find the pixel at 354 x 47. How do I do that? Right now I'm using the rectangle selection tool and dragging it around because I can see the coordinates at the bottom of the screen which seems a little
View 2 Replies View RelatedAutoCAD Inventor :: Find IProperty Location
Jun 3, 2012Am working on iProperties and i am trying to find the iProperty Location. I tried
-Inventor User Defined Properties
-Inventor Summary Information
-Design Tracking Property
But i am unable to find the Location iProperty.. how to find this location.
AutoCad :: Find Location To Insert Block?
Apr 3, 2012I have several blocks spaced evenly apart and I need to copy and paste another block and insert it with the same spacing. I don't want to take the step to find out how far apart they are. I believe there's a way to use the insert command to figure out the distance the next block needs to be placed when I paste it.
I'm not sure if I'm describing it correctly or if I can paste the block using the insert command.
Photoshop Elements :: Find Catalog Location?
Dec 31, 2012Where in my folder tree is the catalog I use for Adobe Photoshop Elements 9 likely to be located. I have just installed Elements 11 and i want to find my old catalog? I have got Windows 7 Home Premium IE9
View 1 Replies View RelatedMaya :: Cannot Find Menu Location For Node Editor
Oct 3, 2011Can not find the menu location for the node editor???
View 8 Replies View RelatedPhotoshop Elements :: Cannot Find Quickmask Tool In Prescribed Location
Feb 7, 2014cannot find my quickmask tool in the prescribed location?
View 2 Replies View RelatedPremiere Pro :: Can't Find Location Of Videos - Export / Render On Computer
Feb 1, 2014I can't find the location of the videos I export/render on my computer. How to change the location of where to save them. I used premiere elements before I used premiere pro. The interface changed on pro and I'm falling way behind on projects.
View 14 Replies View RelatedAutoCad :: Wblock Command Can`t Find Dialog Box To Select Objects And File Location
Dec 14, 2011Land Desktop 2009 Civil 3D Companion
When I issue the Wblock Command I can not find the Dialog box to select objects and file location... This happens in the Layer Dialog when I try to change the color of a layer, the Color Dialog box can not be found. When I use the Block command the dialog box pops up, so I can see it.
fildia>1
cmddia>1
attdia>0
Illustrator :: PDF Artwork Into CS6?
Nov 19, 2013We've just received some artwork from a client in a PDF format, when this artwork is viewed in Adobe Acrobat it shows a star embedded in the artwork,but when the same PDF is opened in Illustrator CS6 this star doesn’t appear...... No warnings are shown to say artwork is missing or has been placed either?
But however when the artwork is exported from Adobe Acrobat in an EPS format, and then this EPS file opened in Illustrator CS6 the star appears.
AutoCAD Visual LISP / AutoLISP :: Set Variable Depending On Location Folder (find Directory)
Sep 20, 2012We have user folders on severall servers, now I want the user menu's to be stored on the network so their home folder depends on what server it's located on. I tried using the vl-file-directory-p command but it doesn't seem to work.
Even worse, as soon as the userfolder is found I want to let the script check for a file called user.cuix in the Acad folder and if it doesn't excists copy it from another location to that folder (if possible).
This is what I got so far:
(setq UserName (getvar "loginname"))
(setq RootZW "\\users\zw\")
(setq RootVL "\\users\vl\")
(setq Company "\\CADConf\ACAD13\")
[Code] ..........
Next to this we have 4 other options as well, but to keep it short I left it at the first 2.
Illustrator :: How To Fit Artwork To Artboard
Nov 26, 2013I have a bunch of artwork that I need to fit to artboards that need to be the same size, basically I'm looking for something similar to "Fit to Frame" in Premiere/After Effects.
View 5 Replies View RelatedIllustrator :: PDF Artwork Missing?
Aug 2, 2012im exporting a pdf from illustrator,and half of my artwork is missing!what can i have done wrong?
View 2 Replies View RelatedIllustrator :: How To Export Artwork To A PSD
Oct 29, 2013I need to export some artwork from Illustrator CC to a PSD. It'll work on some artboards but on others I get an error "Photoshop file could not be saved.".I've restarted and updated.
View 8 Replies View RelatedIllustrator :: Symbol Artwork Won't Map To 3D Object
Feb 11, 2013I can get pre-loaded symbols to map to the art-work, but the symbol I created doesn't appear when I try to map it. I'm not sure if the problem is how I created the original artwork/symbol?
View 14 Replies View RelatedIllustrator :: CS5 - Recolor Artwork Not Working?
Feb 28, 2013I have a file with a number of artboards on which there are objetcs filled with 100% Magenta and some with 100% Magenta and 0,34% Yellow. I want to get rid of that 0,34% but Illy is refusing to cooperate.
Even selecting just two or three objects and trying to recolor using the Edit/Edit colors/Recolor Artwork dialog has no effect. I can change the color manually though, for one or more selected objects.
Illustrator :: Equalize Artwork With Symmetry?
Apr 2, 2013I imported a piece of art into Illustrator and I want all parts of it to be equal and symmetrical. What would be the best way to start going about this?
View 5 Replies View RelatedIllustrator :: What Is The Correct Way To Scale Artwork
Sep 20, 2013I am current CC subscriber and love all the different programs and the capabilities that come along with it. How to scale my artwork. For example, I have designed my business logo at 220 x 220 pixels. When I export it as a jpeg file to upload into my SharePoint team site and resize it, the quality diminishes considerably. Sharepoint recommends uploading a picture that is approximately 60 x 60 pixels. how do I take my 220 x 220 artwork and make it so that when I export it, it is 60 x 60 pixels?
View 2 Replies View Related