I have a logo with a transparent object (trying to achieve a stamped/weathered look), transparency set at 80%. When I go to save as pdf, the object looks jagged and 100% (no transparency).
View 3 RepliesI created logo with a gradient object. The gradient is with a single color and transparency.
I can not export the logo, ( Ai, eps or pdf) in InDesign and keep the transparency of the gradient. Transparency becomes white. For the pdf, not only I do not have the transparency of the gradient, but I also have a block of white around my logo.
I am doing a logo design which comprises text sitting on top of a png image. The original png image has a transparent background.
When I save as .eps, I get the message "The document constrains artwork that requires flattening". So I select the image, Object > Flatten Transparency and it saves fine.
But now it's put a white background behind the image. I need the entire logo to be transparent.
Is there a way to save an .eps file from illustrator without flattening transparency? If not then is there a way around this while still saving as an .eps format?
View 2 Replies View RelatedI have a logo which I would like to use as a transparent .gif file on my wordpress site. I have saved it for web use on Illustrator, but when I uploaded it, there is a white outline on the transparent logo, and it is all pixelated.
[URL]
Suddenly when I save an object in Illustrator and import it into Indesign, I have a white background. How do I save to preserve the background transparency? This has never been an issue before but suddenly started happening. Is there a setting I changed while making a new doc?
View 1 Replies View RelatedI am having an issue placing my Ai file, saved multiple ways, in InDesign without losing quality? Maybe save settings or a step-by-step? I work between Ps, Ai, Id often but just started using Ai to create my own graphics.
View 1 Replies View RelatedI want to upload a new logo I've created as a Twitter profile image. I can export the logo as a JPG but what image settings should I use when I save it?
View 3 Replies View RelatedI can't save for web to SVG format from illustrator CS6. The option isn't in the format list of the save for web dialogue; I only have gif, jpeg, png-8 and png-24. I am sure it used to be there, so where has it gone?
Have I got to do something in the process of setting up a new document?
way to make the cineMax logos (on top), in photoshop? if i make the logo in maya or ulead 3d , then , how can i achieve that
color , transparency and ilumination?
I'm trying to set up an action to save a batch of files I creating using the variables tool (as detailed in this video: [URL]), I'll go into the Actions window, and record myself saving the current file in .Ai format, and then stop recording. Seems pretty simple, but when I set that action to run a batch on my dataset it saves all the files without an extension. Am I missing another step where I set the file format that the action is supposed to save with? I'm confused. I've tried this using a few different file formats and they all come up the same.
this is what my Output looks like:
and my simple action:
Just had a logo designed and would like to add it to my existing photos. How do I resize and change the transparency of the logo when applying it to an existing photo. Everything I have tried so far the logo just covers the picture and I can't move it or resize it much less change the transparency. I am an amatuer and really don't want to put out the big bucks for photoshop itself.
View 11 Replies View RelatedHe wants me to have the completed logo in .ai version and a .EPS..why would they want them saved like this- why wouldnt just a PSD and JPEG be ok?
Secondly, I see that .ai is Adobe Illustrator- what does this allow someone to do, that they wouldn't be able to do on photoshop.
I have the ability to save as EPS, as well as many others, but not .ai. However, I see there is an ability under 'File', to 'Export to Illustrator'. If I was to do this, would this save it as an .ai file that would suit my 'client'.
Does anyone know how to save a TGA with transparency. Google and PS Help havn't gotten me anywhere.
View 7 Replies View RelatedI must be having a brain meltdown because I could have sworn that I have done this in the past but I can't seem to do it anymore.
I have an image that I have created with transparency.
I turn off the background, and indicate "Preserve Transparency".
I then go to "Save to Web As" and select PNG24 with Transparency. Then Save.
When I go and view the file, the transparency is gone and a matte has been added.
Even when No Matte was indicated during saving process
how I can save my transparencies in images coming from Photoshop?
I just got 3.5.8 today and tried to save a PNG with transparency. It removed the transparency. I tested it with just load an image, save as..., ok. Reload -- no transparency.
I tried to reload 3.5.7, but it just gave me 3.5.8. Is there a place to download 3.5.7? I don't remember this problem earlier.
I have a unusual shape that I want to save so I can use in Word. I have filled the middle bit of the shape in white, and the rest of the shape outside is the checkboard (which indicates transparency). But when I save it as a jpeg, and paste into Word, the background is white, not transparent.
View 2 Replies View Relatedam having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedI think I've found a major issue with saving .PNG files that have partial transparency in PSPx4
Essentially any opacity isn't saved correctly, and is made far too transparent. So anything with partial transparency is saved incorrectly.
I first noticed this when I saved a file to PNG that had a drop shadow - and the shadow seemed to have not been saved. In fact it had but the transparency was now so much higher it was almost invisible. Looking closer, all partially transparent pixels are not saved correctly.
This issue isn't present on x2 and PSP 9 (two old versions I've got).
I've done a simple test. Create a new image, transparent background. Fill with a colour at 30% opacity. Save as PNG, save as PSPImage. Resulting PNG looks completely different to the PSP image.
See the below screenshot, and also the but saved as PNG in PSP 9 (to show this is fine).
I'm always saving to PNG and this makes PSPx4 useless to me I'm afraid. I've checked the save settings and it's the same as PSP9.
I am just getting the hang of PS and I've been working on a logo for myself. I've done all sorts of reading on the basics and concepts of the design, what I've not found is anything showing the best way to "save" the logo once I've completed it so it can be sized as needed for the different items (business card, brochure, letter head etc).
View 2 Replies View RelatedI'm using X5 and trying to save a PNG with a transparency mask. Everytime I save or export, I get the white box around it. I read a few posts that talk about a "masked" option check box, but that is not on my PNG save dialog box.
View 2 Replies View Relatedhow to save the image which is having transparency background.
View 1 Replies View RelatedIt seems I'm unable to save a png (or gif) with transparency.
I want to convert a white background to a transparent background so I perform the steps below but unfortunately the exported image still has a white backgroud. I've tried exporting to gif but that doesn't make a difference. Here are the steps:
1. I first add Alpha Channel
2. Select color to alpha and select white (this gets rid of the white background but now my image looks ugly as all the white is gone and it's partially transparent so I perform the next steps to add the white back to the image)
3. Duplicate the layer
4. On the second layer I add a layer mask and initialize it to white
5. On the second layer I use the bucket to color it all white
6. With the second layer selected I meticulously erase the white background knowing that if I accidently erase too much it wont be a big deal - it will only begin to expose the ugly image that.
7. I'm happy with the image so I merge the layers
8. Export to png and I make certain the "Save color values from transparent pixels" is unchecked
why the image I see in GIMP is losing the transparency when I export?
I have finally finished my logo for my friends small business, and want to save the document to a disk for the printer. I am using photoshop cs2. Should I save the document as an eps file for the print shop? I am completely clueless as to how to save my logo to a disk for the printer, so I apologize if this is a completely stupid question. I would also like to save it for a black and white application.
View 4 Replies View Relatedhow can i save a animated logo in adobe edge 3.0 to use it in adobe muse ?
View 1 Replies View RelatedI used Graphics & Photos 2013, I update the software yesterday and if I save my job as PDF, the transparency done on a picture is inverted.Currently I removed the transparency but it is not the solution.Issue appear only when I create a PDF file. By creating a JPG file it works.
View 9 Replies View RelatedI have photo & graphic designer 7 and want to know if its possible to remove the background from a file and save with transparency?
View 9 Replies View RelatedIn Photoshop, I have removed part of a layer via a mask, leaving only one part of the image. Now I wish to save this part as an independent image, png or gif with a transparency. How can I achieve this?
View 2 Replies View RelatedI have a software program that imports DXF files and converts them to its native format, so they can be used for simulations. I use ACad LT to convert DWG files to DXF for this purpose. Sometimes they don't import properly, so I may have to re-open and tweak the DXF several times to get it to import properly. (What can I say - the target application is published by the government; of course it has issues.) The point is that I often have to work extensively in the DXF format.
Every time I try to Save my changes, ACLT tries to save my DXF as a DWG. It pops up a Save As dialog (which I did not ask for) and defaults to a DWG - I have to go back down the list and re-find my DXF format. Every time. Every. Time. Then when I close the file (even if no changes were made since the last save) it pops up another dialog to ask me if I'm sure I wouldn't rather save the file as a DWG before exiting.
I'm trying to save a gif. but if I save optimized, it makes the colours go weird. I just want to save the original but photoshop isn't giving me that option!
View 8 Replies View RelatedSince I have a new laptop with Windows 8, I couldn't get Photoshop CS6 anymore, so I downloaded PS CC. It's working great the last days, but since yesterday PS freezes or closes every time I try to save a .gif in save for web and devices.
View 1 Replies View Related