What I basically want to do is like in Autocad, where we use the bpoly command to convert into regions before extruding them. The same thing, except in Illustrator.
Follow the link to better understand the Region command in Autocad [URL].....
I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedI have a client who uses Bently MX Roads for road design and requires that survey data be supplied in GENIO format. I realise that there are many possible options to get Civil3D survey data into MX, but I am trying to explore the use of the Subscription Extension to Import/Export GENIO.
Surfaces - no problem. Points - I see how I can get that to work. But the only linework that can be exported is Feature Lines, and it is also important that the feature lines have a name (likely related to the layer it is on).
I can convert survey figures to feature lines and name them one by one but would be very time consuming for a whole survey. Is there any way of doing all figures at once?
I'm guessing not and that it is probably easier to do the Genio creation from dwg in MX itself.
Civil3D 2014 - Windows7 64bit
I have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedHow to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedI want to convert a line (Autodesk.AutoCAD.DatabaseServices.Line) to a polyline (Autodesk.AutoCAD.DatabaseServices.Polyline).
Currently I get all the properties from the line, create a new polyline with it and delete the line. I fear data may get lost this way. What is the best way to convert a line to a polyline?
// Line properties:// Color.// Layer.// Linetype.// Linetype scale.// Plot style.// Lineweight.// Hyperlink.// Thickness.// Material.// Start X.// Start Y.// Start Z.// End X.// End Y.// End Z.// Start point.// End point.
How to convert 2D polyline into 3D polyline using AUTOCAD 2012?
View 6 Replies View RelatedI've MAP 3D 2013 64 bit (French version) with SP1.
When I launch command to "Convert polyline to polygon" (_MapPolylineToPolygon), I've message on command line "Select objetcs", I can convert to polygon =>OK
If I launched this command a second time, I've no possibility to select object, I come back to command line.I quit MAP, then launch MAP, and I can use this command only 1 time.
This problem appears after SP1 was applied.
I have one drawing but this is Spline but i want to convert it into polyline. without tracing it. i attach my dwg file with this massage.
View 9 Replies View RelatedHow can I convert Spline to Polyline.
View 9 Replies View RelatedCode that I can run to export the handles and x y coordinates of closed polylines and show results in a text file.
View 9 Replies View Relatedhow a drawing was exported from another program. My problem is: the PEDIT command won't give me the option to convert a line "I" add to a pline.
PEDITACCEPT: 0 or 1, problem remains
It is a drawing from an house designer, I am adding structural members and notes over the drawing. I could xref, but I need to move/erase some of their notes as well. It becomes cumbersome to switch to the source dwg, edit & save, move to current dwg and refresh, to have the note where needed.
This is a pretty strange to me drawing file. It seems that a bunch of system variables are altered and hopefully it doesn't migrate over to files originating from my machine.
How to convert polyline into alignment?
View 1 Replies View RelatedI cant do booleans with polylines, for that I need to convert them to regions which I dislike because I lose edit vertex capabilities right? Also, from a region, how can I convert a region to a closed polyline in one go.
View 2 Replies View RelatedI am some trouble working with 3dface. I want convert 3dface to polyline but in some cases I faces with problem that a 3dface don't convert surface or solid.
View 9 Replies View RelatedI need to convert a polyline to a structural element and put it on a tool palatte. I'm pretty sure I got it into the Design Manager, now I need to make it a structural element. I used to know how to do it in Acad 9, but now in Acad 12 I forgot,
View 1 Replies View RelatedOur customer send us drawing with ellipse into.With Autocad 2008 I bought a plug-in call SplineConvert that did the job perfectly but not compatible with 2013.
Is there any plugin that could replace that tool ?
Is there any standard ACAD command that could easily do this Job ?
I need a way to make 2 or 3 times per week this converting on all ellipses of large and detail 2D drawings so no time to offset in and out all those .
I try also DXFOUT in R12 but all the spline are being converted into 3d polyline making a huge files that froze my PC.
I also try FLATTEN but did not see how it work , the ellipse stay an ellipse.
how to convert polyline object (with x, y, z) to TIN SURFACE BECAUSE IF THIS OBJECT STILL POLYLINE OBJECT, I CAN'T RUNNING CATCHMENT AREA, ADD LABEL ETC
View 5 Replies View RelatedFeature lines are easy to make and great for grading. However, when I try to save the drawing into *.dxf, all the feature lines disappeared. Does this mean DXF files do not take feature lines?
I need the DXF files to up load into GPS. Do I have to redraw everything in 3D polyline?Or is there an easier way to convert feature lines into 3D polylines?
I need to convert my surface boundary to a polyline so I can use it to clip another surface. Is there a simpler way than tracing it with the polyline command?
View 3 Replies View RelatedI have converted Polyline to Hatch, how do I bring the Object Data from the Polyline to the Hatch as well?
View 1 Replies View Related[URL]....
That code is also useful for feature lines or parcels?
Can I get polyline Id after we can create automatically?
I want calculate all location crossing between feature lines.
Currently, I know to do that for crossing polylines.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I would like to convert a spline to a polyline for the sole purpose of finding the area. Is there a way to do this or is there another way to find the area of a spline? Typing list does not give me the area.
View 9 Replies View RelatedI have a polyline AutoCAD 2010 and would to convert it to a kml file for use in Google earth.
View 3 Replies View RelatedCan I convert a section of an ellipse outline to polyline so that I can see it's length from Properties? And why Properties does not show the length of a spline?
View 4 Replies View RelatedIs there any option to convert "Circle" to polyline and give thickness.
Usually i draw a circle and use polyline command and use " arc " to give thickness to the circle.
I know that it's not the proper way.
I want to use this thick circle for making viewport.
I'm working on crane pads for a windfarm development and have run into an issue that has never happened in the other 60 or so ones I've done previously.
I have a polyline (elevation added in via Properties) that I want to convert to a feature line for use in grading but when I try to convert I get the message below
When I check the properties and do a LIST the list reports a negative elevation.
I have a data structure called LayerList in the format [LIST "LayerName" "Linetype" Thickness Color]I then use the following piece of code to go through the structure selecting polylines and converting all polylines on a given layer to the correct thickness
(foreach layr layerlist
(setq player (car layr))
(if (setq ss (ssget "x" '((0 . "*polyLINE") (8 . player ) )))
(command "pedit" "m" ss "" "w" 0.15 "")
(princ "
No polylines exist!")
)
)
However all i keep getting is Bad SSGET list value at the command line,
Our customer send us drawing with ellipse segments into.
With Autocad 2008 I bought a plug-in call SplineConvert that did the job perfectly but not compatible with 2013.
Is there any plugin that could replace that tool ?
Is there any standard ACAD command that could easily do this Job ?
I need a way to make 2 or 3 times per week this converting on all ellipses of large and detail 2D drawings so no time to offset in and out all those .
I try also DXFOUT in R12 but all the spline are being converted into 3d polyline making a huge files that froze my PC.
I also try FLATTEN but did not see how it work , the ellipse stay an ellipse.
I'm trying to look for a LISP command where i will create a closed polyline with 4 sides in different angles. then convert it to region.
View 6 Replies View RelatedI'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
What am I missing here?