I've created an artboard at a certain size. I put some objects within the artboard. But the exported PNG is not the size of the artboard, but is only the size of the graphics on the artboard.
View 3 Replies
My printer (actually, it's a laser engraver) is reading the entire artboard in addition to the actual image as needing to be run when set for "3D" (aka greyscale) images, as opposed to just going to the image on the artboard. It is running as though it sees the empty space as white and it is trying to "color" it. When it gets to where the image is placed on the artboard, it runs the image (black or greyscale) within/on it. It wastes A LOT of time. I guess, what I really want to know is how to make sure the artboard area is not being picked up and seen as a part of the image. I need it's dimentions to be read, but not any fill except for the actual image(s) on the artboard. I've never had this problem in the past with other machines (by the same manufacturer) using Illustrator. I was using CS5, not CC.
I ran this by the laser company's techs and they say it is an issue with my Illustrator/Adobe set up, not their driver.
I'm working on designs in Illustrator and preparing an InDesign document with all of the graphics in one file for the client to review. The artboards are set to the size of a pier sign that will be all wood, but there are left graphics on the wood that will be laser cut and these extend beyond the edge of the wood. When I place the separate artboards in InDesign, they are cropped to the edge and I'd like to show how the left graphics extend beyond it. I've tried different import options but none of them show beyond the trim. (Also, if it makes a difference, the artboard sizes are fairly large—about 60" wide)
View 3 Replies View RelatedIs it possible to copy a specific area (Artboard area) and paste it to new document by using JSX.
View 1 Replies View Related1.) I dragged out vertical and horizontal guides from the rulers and then created a new art board. The new art board now has the horizontal guides carried over from the first art board. How can I have separate guides on each of my art boards? I am using art board rulers.
2.) Is there a way to layout vertical and horizontal guides on an art board and copy them over to a new blank art board?
i have around 500 eps formats images with different artboard size.
i need to resize the artboard to A4 size and the images to be placed in the centre of the artboard.
After selecting the area type tool, I try to click and drag but I get an error message: You must click on a non-compound, non-masking path to create text inside a path. This worked before but I must have screwed something up.
View 3 Replies View RelatedI have a big artboard with a simulation of a webpage, and a smaller artboard within it, where I'm designing the artwork, so that I know how the big picture will look. In the end, I intend to export the contents of the small artboard. The problem is that whenever I click by accident on the small artboard, my view of the web page gets off-centre.So in short, If I could just lock the small artboard, that would solve this annoyance. For now, I have two options: either delete the artboard and set it back in the end (it's got to be perfeclty positioned though) or, quite practically, just create a custom view with a shortcut that I can use instead of the "Actual size" one (Cmd+1).
View 18 Replies View RelatedI have a AI CS6 file with 16 artboards. I need to 'save for web" a jpg of each artboard. Is there a way to automate this, by setting up an action - or is there any way to do this? I'll be having to do it frequently.
View 16 Replies View RelatedI have a bunch of artwork that I need to fit to artboards that need to be the same size, basically I'm looking for something similar to "Fit to Frame" in Premiere/After Effects.
View 5 Replies View RelatedI'm designing some business cards, which have an 1/8" bleed, along with elements that hang outside of the border of the card. Is there a way in Illustrator CS3 that I can say, "hide everything outside of the Artboard" so I can see what the finished product will look like?
I know I could print them out or output to PDF and see it without the non-Artboard items, but these approaches seem clumsy and labor intensive. I'd like it if I could have some sort of "cropped view"--where everything not on the Artboard is hidden--to work in.
I'm finding that when i add a second artboard to an existing ai, then save and close, it has disappeared on reopening.
I have both pieces of artwork (one for each page), but 1 of the artboards will have disappeared. Irritatingly the remaining artboard sits between the 2 pieces of artwork - in the wrong position for both!!!
I am struggling with the "sAIArtSet->MatchingArtSet()" in restricting it to find the artset from the selected artboard only.
One way is to iterate through the found art set and compare art's artboard index with the index of the selected artboard. Wanted to know if there is some internal SDK suite which does this iteration in a more optimized way ?
Illustrator cs5 will not export to artboard, even though the artboard is properly set and "Use artboards" is clicked in export dialogue box.
Bleed areas are set and crop marks, all of which print fine. But I want to export to jpeg just to see how the cropped output will look.
I have tried googling this and am able to save each artboard as a jpg but not as an eps or ai file.
View 6 Replies View RelatedI need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
So how-to get rid of the border?
I figured it out. View > Hide Artboards.
when I try to rearrange artboards most of the content doesn't move with it.How do I change the content to be associated with a specific artboard?
View 3 Replies View RelatedI've been searching everywhere for a script or plugin that will shrink the artboard to fit the content. Fireworks has a feature like that.
View 32 Replies View Relatedis it possible to make a new document and instead of having it shaped like a rectangle/square, to have it shaped like a octagon? I'm making a square shaped business card, but I want the right side of the card to have a zig-zag pattern cut out on it.
View 2 Replies View RelatedI have setup a display panel with 4boards at various sizes. (Spreads). I now need to make a PDF but as artboard spreads as this is needs to be shown like this for sign off.
Illustrator cs6
When saving for web or exporting an artboard is there any way to pre-populate the save file name dialog box with the artboard's given name. It would save having to re-name the file and make good use of that metadata.
View 4 Replies View RelatedWe currently use CS3 in our Art Dept at the sign company I work for. Sometimes designing/layout for some projects can be a pain when they go beyond the max artboard size constraint in CS3. This is especially true in my dept which does all the large format digital printing. I find myself having to switch back and forth between some of my sign software, which has almost limitless area for design and layout. Not that we can't work in scales but life would be so much easier if we could do things in full scale. Now to the point, does CS4 have larger artboard size than CS3?
View 7 Replies View RelatedIs there a way to size without Illustrator CS6 rounding up? example, I need my document to be 3.625 x 2.125" to output a file to a printer and illustrator keeps rounding up to the third decimal 3.63, Is there any way around this? I found going back to CS3 works but all my files have conversion issues opening that far back.
View 3 Replies View RelatedHow can I set the units of my artboard to cm instead of millimeters when I want to resize it?
View 2 Replies View RelatedI am on a pc (windows 8) using illustrator cc and trying to save from an .ai file to an .svg file. I've also taken a previously saved svg and manually fixed the artboard, then saved. Still resizes the artboard. I've done this multiple times with sucess, but after updating the software last week, the artboard is expanding when I save. I thought I must have changed a setting, but don't think so. I've read lots of posts and tried all kinds of settings but here doesn't seem to be a solution out there. Wish I could go back to the older version!
View 6 Replies View RelatedThe first time it happened, I uninstalled AI and did a fresh install which fixed it for a short time. When I save a PDF out of AI, it does not save to the artboard constraints. This is a screen shot of my AI document which has 2 pages.
When I save as PDF, this is what the file looks like:
(Pg 1)
(Pg 2)
After the original file has been saved (incorrectly) I can open it and save it again and it will be fine.
Is it possible to display metadata as text on an artboard?
View 2 Replies View RelatedIn CS5, if you hold the ALT key (on windows, not mac) while resizing the artboard, it will scale from the center... creating an even width reduction/ increase on either side of the page. Why was this behavior removed in CS6?
View 4 Replies View RelatedHow to re size the canvas ? (i am not asking about the art board, but the canvas).
View 1 Replies View RelatedI am setting up an artboard 7 x 3.375. When I enter the 3.375 Illustrator changes it to 3.38. Is there a way to change it so it keeps the exact dimensions I entered?
View 5 Replies View RelatedHow do I make the artboard transparent?
View 5 Replies View Related
