Illustrator :: Century Gothic Incorrect Display
Apr 21, 2013
Not sure if this is an Illustrator or Acrobat question!? I created a document in Illustrator CS6 using the font Century Gothic. I converted the text to outlines then saved the document as a PDF. When the document is viewed in Acrobat Pro or Reader, the lowercase letter "L" does not display properly. It's as if the pixel depth is not granular enough, so it increases the width of the letter. If I zoom in past 200% the letter seems to display properly, but anything below that it displays oddly. I sent the exact same file to my DropBox account, downloaded it onto my iPad (retina) and the letters look just fine; same with my iPhone.
Screenshot: [URL]
Note: This happens whether I create/view on my Mac or my PC. Additionally, if I do not convert to outlines, the font displays just fine. Regardless of the display, the document always prints correctly. I've experienced this since CS3, but never cared too much since most of my documents were for print only. Now many of my docs will be viewed rather than printed, therefor proper display rendering is a much bigger issue.
View 3 Replies
ADVERTISEMENT
Jun 24, 2005
I am looking for Franklin Gothic Medium and Franklin Gothic fonts (Trye Type, for windows)
View 1 Replies
View Related
Nov 22, 2013
I have Adobe CS6 Design Standard student and teacher edition. The package includes Photoshop CS6, version 13.0.1 x64. In Photoshop CS6, when I bring up the Select Color Range dialog, I see the correct dialog box, but the main image of the photo on my screen changes to a black and white display that looks like the preview of a color range mask in the dialog box, instead of the normal full color image I should see. This occurs whether or not I have yet made a selection. Here is a screen photo of this incorrect display:
This problem does not occur when I use Photoshop CS2 on the same computer. Here is a photo of the correct display in Photoshop CS2:
On November 20, I spoke with an Adobe support person on the telephone. I was unable to describe the problem in a way that the support person could grasp, and the case No. 0184920291 description is now listed as "effect doesn't come with color sliders". It is impossible to use the selection eyedropper to select a color from an image displayed as a monochrome mask.
View 3 Replies
View Related
Mar 22, 2012
In Lightroom 3.6. I am having difficulty with the photo date in the thumbnail. I had a series of pictures with incorrect dates in the metadata and I used Microsoft Photo Pro to correct the dates. The metadata is correct in the file and shows up correctly in the Metadata group of the right side panel, but some of the thumbnails show the date of the changed information rather than the Date Created. When I told it to "Read Metadata from disk", only the first file shows up correctly in the thumbnail. The others show today's date, which was the date that I made the changes to the files.
View 9 Replies
View Related
Dec 1, 2011
For better speed i'm using coreldraw 12. All of a sudden it is showing different colors for files. A color shows up different in version 14 [ that is the correct display ] . it is incorrectly being showed in version 12. i've put up screenshots of both versions. What setting is messed up in version 12.
THIS IS THE INCORRECT ONE AS SEEN IN VERSION 12 . The file is same
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 2 Replies
View Related
Apr 20, 2013
I have a client that is having difficulty with Design View Representations. He has approximately 15 view representations, each having items in different states of visibility. The icons display the modes of visibility correctly, however, there are no objects visible in the graphics window at all. Additionally, the option, "Find in Window" is missing when right-clicking on visible objects. Only when he copies the View Representation over to a LOD, and then saves that back out to a VR, do the graphics in the window appear correctly. Then the Option, Find in Window shows up and is available.
View 1 Replies
View Related
Dec 2, 2010
I am having problems with the display of my structures in a profile view. Previously, when I change the inverts of the pipes connected to my structure it would automatically adjust the bottom (sump) of the box invert to match my lowest pipe. However, for some reason it has stopped doing it and is now displaying the sump invert incorrectly. I have my style set to "Display as a Boundary". I have edited the structure sump to be by both elevation and depth, but it does not update the sump elevation. I have tried to grip edit the sump but it seems to be locked at a certain elevation. I have a profile with 10+ structures and they are all at multiple depths. I realize there are minimum depths allowed by the structure, but I have exceeded the minimum depths in all cases. Attached is an image that depicts my problem. No matter what I do to change the depth it stays locked at a certain elevation.
Civil 3D 2011, SP1
View 9 Replies
View Related
May 14, 2013
I have to redraw 19th century raster maps that cannot be vectorized automatically.
The borders of the parcels are heavily curved.
I insert the raster map and start to trace/draw on a new layer.
1. Now, if I want to draw a second parcel that has a common curvy border with a first parcel how do I best trace the common border? What I would like is that the vertices along the common border are all displayed so I could just click them rapidly to draw the common border of the second parcel. However I cannot find a way to display all vertices. Is there a solution for this?
2. For drawing a new parcel alongside multiple existing parcels, a beter/faster option would be that I just click the vertices on junctions of the common border and the software would automatically trace the line between the junctions, create all vertices and snap them to the existing vertices on the common border of the existing parcel.
View 9 Replies
View Related
Sep 4, 2012
if you click this link and see some gothic pictures you'll notice they are awesome, I want to do that in photoshop like :
1. Converting face to fully white but with details
2. Use custom eyelashes
3. Darken Lips and Eyes
how can I do that
View 9 Replies
View Related
Apr 10, 2009
Recently installed Photoshop CS4 on WIndows Xp. By default, the Kozuka Gothic fonts are installed. I don't necessarily need them and in an effort to maintain a clean fonts folder, I removed them along with the rest of the extra fonts that are loaded. I now get an error when I open certain PS files. Error is as follows: This file uses one or more fonts which are unavailable on this machine. Open anyway? I'm opening Illustrator-generated EPS files with all fonts converted to path. Does anyone know if the Kozuka fonts are necessary for Photoshop to open blank or existing documents? Maybe it's a required font for the program to run. Similar to MARLETT.TTF in Windows which holds fonts necessary for scroll bars and things like that.
View 4 Replies
View Related
Jul 25, 2006
My friend ade these pictures and she claims she did them completely by hand, but, she lies lol, so I' not sure whether to believe her or not. Plus, it looks quite nice and I'd like to know how to do it myself, any help?
View 3 Replies
View Related
Sep 19, 2011
I am having problems producing 3D text in "Gothic G" font. I can produce 3D text with the “Tahoma” font as is seen in the picture. However, when I go through the same procedure with the Gothic G font I get the following error message after trying to extrude the text in the “Model” window:
“Could not build this extrusion Self- intersecting loop found in this profile. Remove the intersection by adding a sketch point at the curve intersections or by changing non-profile geometry to constructive geometry"
I have also noticed that other fonts upon trying to be extruded produce the same falure message.
What is the procedure to produce 3D text in Gothic G and the other fonts that produce the same error message?
View 3 Replies
View Related
Sep 23, 2012
Ps CS6 v13.0.1
OS X 10.6.8
Problem: Ps CS6 incorrectly renders vector objects pasted from Adobe Illustrator. CS5.1 does not exhibit the problem.
Below is screenshot of artwork in Illustrator and which is copied to clipboard, followed by screenshot of "Paste as Smart Object" in Ps CS5.1 then screenshot of same paste in CS6. "Paste as Pixels" gives identical good rendering in CS5.1 and poor rendering (gray pixels which should be pure white in this example) in CS6. This is repeatable with other artwork.
Several weeks ago there was a complaint in this forum that Photoshop CS6 poorly renders vector artwork that is pixel-aligned in Illustrator. The Adobe response was that Photoshop is correct. Strange that CS5.1 can render pasted vector artwork perfectly and only CS6 makes a mess.
View 5 Replies
View Related
Jun 20, 2012
One of the few software that didn't play nice was CS3, so I had to re-install it. Now, many of the fonts won't show up. I'm doing a logo for a client and I need some fonts but fonts from the following- New Peninim, Corsiva Hebrew, Ariel Hebrew and/or Raanana-- don't appear after you engage the Type tool. What shows up in both Photoshop and especially Illustrator is a square box with nothing in it.
columns on line and followed 4 or 5 different "solutions"-- nothing seems to work. I even, against my suspicions, called the Adobe customer service and the best they could offer was to post a question here if my answer was not apparent.
Bearing in mind that I've put fonts in the Adobe folder, reset characters and a few other things since yesterday.
View 7 Replies
View Related
Jan 1, 2007
Photoshop will not display files that were created in Illustrator regardless of format. When opening a file in photoshop that was created in Illustrator, I get a box with handles, but no image.
I started having this problem yesterday, after installing a new keyboard and display.
View 1 Replies
View Related
May 31, 2013
I have a previous gen 15.4" MacBook Pro which is equipped with a 110ppi display.. Would be nice if i could set that also in Illustrator settings (or better yet if Illustrator could automatically detect that) so when i zoom my work to 100%, it would actually display my work in real life size.
I understand that Illustrator is not meant for print prep but you often do create something (or a part of something) which will be reproduced in physical form (and size) and then it would work if you could in one click go to 100% zoom and see it in real size before you. atm i have to manually zoom to ~152% (given my 100dpi display => 110dpi/72dpi*100%). so you see it would be a feature for previewing.
How can I in the meantime change Illustrators presumption that my display is 72ppi like they were in the 90s?
View 3 Replies
View Related
Jul 26, 2012
Today, out of the blue, Illustrator stopped displaying any raster images. The file opens, but I just get a blank artboard. The title bar at the top of the page shows the preview but it doesn't display on the page. It doesn't seem to matter if I import the file or if I just open the file straight into Illustrator. I've tried PSD, JPEG, TIFF, and PNG without success. This morning I was redrawing old logos for a client, and this afternoon I can't open anything that is rasterized.
View 2 Replies
View Related
Jul 5, 2013
On my iMac, LAYERS don't display correctly in Illustrator CS6.I create 3 layers. When I set "don't print" to the upper layer (Calque 3), the display of the panel isn't correct anymore. The 2 other layers disapear in the panel, but on the workbench everything is still ok.
When moving the layer (Calque 3) down, the display of the panel becomes ok again. But my drawing request that I don't change the layers's place.
View 7 Replies
View Related
Nov 13, 2012
I am using Illustrator CS6 on windows 7. I created a document on Illustrator CS4 on mac osx and exported the file to a pdf. Now when I want to edit the pdf in illustrator the images and drawings display correctly, but only certain text is shown. Not any text in particular, but just random lines of text within paragraphs. The rest of the text does not show up at all.
View 6 Replies
View Related
Feb 6, 2013
I just installed CS5 from my university (Uni München = LMU) and didn't see any way to choose the language. Now I need to change it from German to English. How can I do that?
View 1 Replies
View Related
Apr 17, 2013
I am using masks inside symbols in Illustrator. When I save a PDF, it displays fine in Chrome, IE and in my Windows Acrobat. But all masks fail in Firefox.
I am using Illustrator CS6, Firefox 20.0.1 (most recent), and PDF Plug-in for Firefox Adobe Acrobat version 11.0.2.0.
View 1 Replies
View Related
Oct 7, 2013
I am creating a document in Tamil. Normally I type in Google document. Then copy and paste in Word. It works perfectly.
Now I am creating a poster in Adobe illustrator. I did type in google and pasted in notepad. It works perfectly.
When I copy and past in Adobe Illustrator the font is not displaying correctly.
In preferences-->Type-->Text Engine options I selected 'Middle Eastern', previousy it was 'East Asia', after that the Tamil letters are getting displayed correctly.
I have seen another post which says I need to enable show Indic option. [URL] Unfortunately I do not have Indic option. My screen looks different
I have some tamil fount installed. When I tried to change the fount to tamil font, it does not work either. I have another font called Latha. When I changed to Latha font the character displayed in Tamil but all spelling went wrong in Tamil.
View 2 Replies
View Related
Mar 1, 2014
I have successfully created my first mask in Adobe Illustrator CC. The mask is a logo with a camouflage mask in the lettering. The original camouflage is the normal green, but after the masking it only display black and while. How do i display the colors of the mask (camouflage) layer?
View 3 Replies
View Related
Jun 12, 2013
In Illustrator, I save a vector clouds with a blue backround. However, once saved as a PDF, the blue sky doesn'y appear. Just the white clouds on a checkerboard backround appear.
I have checked, the layer isn't locked.
View 4 Replies
View Related
Jan 27, 2014
I know in the brush options panel you can enter a brush size in millimetres, but is there any way to permantly make it display the size in mm? I need to know how thick some lines are in mm, and even after going to options and changing all diplay uints to mm, it still shows up as pts.
I've attached a picture of exactly what I'm referring to below. (The "Size" field currently showing "15 pt". I need that area to display mm).
View 1 Replies
View Related
Nov 4, 2013
my CS3 design premium looks pixelated on my Macbook retina display. Can this be fixed?
View 1 Replies
View Related
Oct 6, 2012
I should have spoke up sooner because I thought this would get fixed pretty quickly but I just upgraded to CS6 and it's still broken. I use Photoshop to generate color separations for screen printing. We do simulated spot process which means we print the prodomient colors of the image rather than gambling that CMYK will work. We print white because garments are often any color you can imagine. So I use the DCS.eps format alot. I place this linked in Illustrator. Up untill CS3 this worked fine. I skipped 4, but upgraded to 5. Five doesn't display the white channel. (These files are Multichannel mode, each channel is a Spot channel. saved as dcs/eps) I have not tried output. It may print fine.
The thing is I end up with a client perched on my shoulder like a buzzard and if the white parts of the design or the white channel/screen isn't their to support the top/upper colors I look like I don't know what I'm doing, or I left the white out, etc. I've been in both offset printing and screen printing and T&T (trinkets and trash) for a long time. Messing up paper is one thing. Messing up an Under Armor or Nike or you name it garment is a whole different ballgame so they are pretty tense when it comes to what they see. I already have to explain that it looks pixelated and rough because it's an 8 bit preview but will print sharp.
View 13 Replies
View Related
Mar 18, 2014
Illustrator 15.1/CS5 on Mac used to display selected text in reverse and would show handles for text on a path. Now it does neither.
View 1 Replies
View Related
Aug 4, 2012
I almost always work in Picas; and I just started using CS6, so I've just discovered that Illustrator CS6 has an annoying habit of occasionally — not always— deciding to display Pica units incorrectly. The only common factor is that it's always a whole Pica value, and the last whole Pica is displayed in Points. For example, 5.5 inches should be displayed as 33p0; but sometimes — again, not always — Illustrator CS6 will choose to display that as 32p12.
Well, first of all, anything-"p12" is just wrong. It's anything+1"p0," dammit.
Secondly, even if there was some insane rationale for displaying "p12,"
View 3 Replies
View Related
Jan 28, 2014
I work at a university and have logos shared with me from other designers, most of which are working on Macs and I'm working on a PC. When I open the logo and select all, the size displayed is 227.5417 inches x 227.5417 inches. The last one I received, the actual size of the logo was 2 inches x 1.75 inches. How do I get Illustrator to display the actual size of the logo?
View 7 Replies
View Related
Sep 4, 2012
How can I increase the display size of anchor points? i.e. the vertices.? they are too small to see clearly. i am used to vertice point size of coreldraw.
View 8 Replies
View Related
