how can I draw in GIMP freehanded curved interrupted lines (dotted; dot-dash-dot; dash-dash;...) ?To create lines first with a pencil and to use then the rubber gives uneven and so unsatisfactory results.
View 2 Replies
How can I draw in GIMP free handed curved interrupted lines (dotted; dot-dash-dot; dash-dash;...) ?
To create lines first with a pencil and to use then the rubber , gives uneven and so unsatisfactory results.
How do you draw parallel lines with a specific distance between them? I was gonna use this function for futuristic artwork. Do you have to use the grid for this or is there another way?
PS. is there a plugin maybe?
I'm getting this error message when trying to render a simple cfx with a simple action node inside it. The action node only contains a photoshop file with one layer and the default camera moving towards the layer.
My media cache is set to Pro Res 422.
i have a rendering problem... rendering a cfx on the timeline keeps interrupting ... I get an error message "rendering interrupted. cannot process connectfx "
I tried to disconnect all footage which lead into action and rendered them one by one to find out which footage is the problem... the 5K red footage makes the problem.what I need to do is to auto stabilize the 5k clip (which was due to a bug(?) not possible inside cfx, so I did it with the desktop tools) than brought the clip inside cfx, added a modular keyer node, than a timewarp node than went inside action... than back to the 1920x1080 timeline
the problem started suddendy. rendering worked fine (keying the 5k footage, timewarping.. axis... ) ... than I added another media into action, did some axis animations and the problem started (but if I disconnect the media I added, same rendering error..)
In cs 4 how do I draw a curved line?
View 1 Replies View RelatedI wrote some stand+alone application (WinForm=, where user can specify dimensions.Now after button click I want to switch form to current AutoCAD file and prompt user to specify point.
From this point I want to start drawing few lines.And I don't know how to switch to AutoCad and get current drawing space.
Drawing Parrallel lines from one elipse to another?
I am drawing pipe and beams.
I use a variety of methods. Right now I just SNAP to the elipse, draw the lines at the angles and then hit the other elipse. Sometimes though the lines jump all around the elipse.
I am trying to draw lines(orange colored) on this 3d object(crimson colored). Every time I go to select the lines to alter them I end up only being able to select the 3d object they are on. How do I turn off the selection of the 3d objects or anything on that layer?
View 9 Replies View RelatedSomehow i can't draw lines with different lineweight. I can change the color and the linetype but the lineweight doesn't. In the properties toolbar over the workspace the last option (after lineweight) is not active and shows bycolor!I suppose that is the problem why i can't draw lines with different lineweight!
View 9 Replies View RelatedHow can I draw lines with numbers in autocad that represents sizes of other lines (I don't know how to call them on English) ? For example on this pic lines with numbers 50, 60, etc.
kotiranje1ab1.jpg
How do we draw three lines instead on one? As an architect, the exterior walls are 3-lines for brick construction. How can I draw with 3-lines instead of one in Aouto Cad 13 for Mac?
View 4 Replies View RelatedWhen I draw a line in photoshop creates a blurry outline around the line that does not occur when I draw the line in Paint. How do I achieve the same solid line in Photoshop?
View 5 Replies View RelatedHow do I draw 2D lines from points? What setting do I need to change? I want to drawin glines using the node as a grip but I do not want them to have z coordinates.
View 5 Replies View RelatedI am doing a project where we should detect center of object and automatically draw lines in all directions example: Lets consider a rectangle, locate center of rectangle and draw lines on all directions.
View 3 Replies View RelatedAnyways; select LINE TOOL, options above are:
Fill Pixels
Line Tool
Weight : 1px
Mode : Normal
Opacity : 100%
Anti-Aliased : No check
Brush Color : Pink
Click on the canvas, hold SHIFT to force a straight line, move towards the bottom of the document, let go of the mouse button, it draws a line straight to my mouse's cursor! I have no other ideas what is causing this.
I have to draw this:
[URL]......
But I can't understand how to draw the lines with that measure in fractions. I have my units set in "Architecture : Inches".
For example, in the right line that is: 9'-11 7/8''
What I do is, start the line command, click anywhere on the gril (because it doesn't say where start... so I guess you could click anywhere, although I am not sure about that either). And then I put, @9
I am not able to draws circles and lines etc. using the ribbon or the command line. i am using the correct procedures per the tutorials and I have Google search how to add circles. I click the circle on the ribbon, choose my center point and drag to choose the radius, left click and no circle, same procedure for a simple line.
Is there something that needs to be activated for these to work? I have an activation code which I do not remember using when I installed the software, I only remember using the serial number and product key.
It's me again w/the same tut at: [URL]
Where I am confused is that once the line is drawn from top to bottom and I go to draw the line across the upper area the anchors stay connected.
I tried the Alt key + click to cut the path but (as you advanced folk probably already know) it didn't work.
way to make the bottom Anchor an end Anchor? Does that even exist?
Honestly I am not even sure what I ought to be looking for in the manual etc.
I tried just drawing the shape for the Glossy effect and then filling it with the required gradient but frankly it just looks odd ... it looks flat and basically UGLY
The blue line that goes across is the problem for me.
I should also mention, if you go to the tutorial ... it says that I am suppose to Duplicate the Inner Circle but I made too many goofs and somehow all my layers ended up on one layer so rather than doing what the tut instructs I just made a New Layer and then drew a new circle with the Ellipse tool.
Even so, I actually couldn't grasp why or how I was suppose to go about intergrating the new circle with using the Pen Tool to draw the Glossy effect object. So, I skipped that part and just used the Pen tool to draw the needed shape as shown above in pink.
For some reason, GIMP is putting straight lines off of any line I draw (paintbrush, ink or pencil) and while it's pretty cool, I'd like to be able to draw properly.
View 8 Replies View RelatedHow to draw vertical lines at a chosen regular interval/period ? I want to have a vertical line every 4 mm.Without havind to drag and drop a new line from the previous one...
I need about 20 vertical lines spaced of x mm..At the end it should look like a table without the horizontal lines
I cannot produce Curved Lines (read: Arcs). I'm wondering if the capability to do this in the PSP X5 program is glitchy--perhaps requires a fix? Normally, I formulate short-cuts or 'tricks'--nothing has worked here for my purposes however.
View 1 Replies View RelatedVersion: Autocad 2013
I have a problem drawing straight lines. Normally, like everyone, I will start from any given point and the line i wish to draw will snap to 0, 90 or 180 degrees. However there is now no snapping and no straight lines.
I have tried resetting SNAPANG to 0 (it is already set to 0) and this works for maybe the next 3 lines but then I am back to square one and cannot draw a straight line without constantly having to reset SNAPANG.
I've tried resetting USC to world. I've also tried changing PLAN to view and world.
I have received some electrical drawings that i'm making some alterations to. When i try to draw a line between fittings it just disappears. I'm not very experienced with auto cad and only really use it to alter drawings for final designs.
View 4 Replies View RelatedI want to show slope direction in my drawing for a small V-Ditch.
I tried one way by utilizing Measure Command however didnt work out for both face of Concrete V-Ditch because Measure Command aligns the Block on one side of the Line you want to meaure with block.
I have a student who is using AutoCAD 2010 and has Ortho set to on and for some reason it does not draw straight horizontal or vertical lines. They are off by about 5 degrees.
View 9 Replies View RelatedIn order to make a 2D sketch, how can I make appear constructions lines in order to draw a top view from the main view?
View 1 Replies View RelatedI assume there's some button combination I'm missing? All I know is I can connect a series of freehand lines no problem, but the straight line tool is not consistent operation with the freehand tool.
View 4 Replies View RelatedI need to be able to draw "squiggly" (multi-point)lines. Specifically, roads on a map. Is there any tool or plug in that allows for "squiggly" lines? The line/ curve tool seems to be limited to 4 points that act as reference points for curves only so it isn't any use to me.
View 5 Replies View Relatedwe are using AutoCad 2011 and 2008.When any draw is open everything seems to be just fine, but when we print it out then it came out with lines around the objects(green, grey...)
We have tried 4 different printers with all drivers that we could found on internet, with no success. On the ploter we aren't having any problems and the lines are gone.Also the AutoCad 2006 is without the problems, but we want to move on to the version 11
Is there any setting which we should change?
I'm suffering to draw a circle connect with a arc and 2 straight lines for almost an hour ago.
View 9 Replies View Related
