How can I draw lines with numbers in autocad that represents sizes of other lines (I don't know how to call them on English) ? For example on this pic lines with numbers 50, 60, etc.
kotiranje1ab1.jpg
I'm looking for a lisp routine that will draw a line between all matching numbers that are repeated 3 times or more in a selection.I'm using AutoCad 2012.
View 9 Replies View RelatedI've hit the wrong button, i have lines with numbers and a small box next to them all over the page. How do i get rid of them
View 3 Replies View RelatedI have an opportunity to make a good impression at a new job, but ive never had the initiative to learn how to write a lisp routine. at my work we make walk-in coolers and freezers. these coolers are modular with a standard wall piece measuring a certain length. these wall sections have to be numbered sequentially. is there any way to automate this? sometimes we get change order from the client and it means going back and manually changing multiple texts (sometimes in the hundreds), but i thought if there was a way these wall sections could be scheduled somehow that when a new wall panel is inserted in the beginning of the sequence it would update everything after it automatically.
View 9 Replies View RelatedI wrote some stand+alone application (WinForm=, where user can specify dimensions.Now after button click I want to switch form to current AutoCAD file and prompt user to specify point.
From this point I want to start drawing few lines.And I don't know how to switch to AutoCad and get current drawing space.
Drawing Parrallel lines from one elipse to another?
I am drawing pipe and beams.
I use a variety of methods. Right now I just SNAP to the elipse, draw the lines at the angles and then hit the other elipse. Sometimes though the lines jump all around the elipse.
I am trying to draw lines(orange colored) on this 3d object(crimson colored). Every time I go to select the lines to alter them I end up only being able to select the 3d object they are on. How do I turn off the selection of the 3d objects or anything on that layer?
View 9 Replies View RelatedSomehow i can't draw lines with different lineweight. I can change the color and the linetype but the lineweight doesn't. In the properties toolbar over the workspace the last option (after lineweight) is not active and shows bycolor!I suppose that is the problem why i can't draw lines with different lineweight!
View 9 Replies View RelatedHow do we draw three lines instead on one? As an architect, the exterior walls are 3-lines for brick construction. How can I draw with 3-lines instead of one in Aouto Cad 13 for Mac?
View 4 Replies View RelatedI have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
I am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies View RelatedHow do I draw 2D lines from points? What setting do I need to change? I want to drawin glines using the node as a grip but I do not want them to have z coordinates.
View 5 Replies View RelatedI am doing a project where we should detect center of object and automatically draw lines in all directions example: Lets consider a rectangle, locate center of rectangle and draw lines on all directions.
View 3 Replies View RelatedI have to draw this:
[URL]......
But I can't understand how to draw the lines with that measure in fractions. I have my units set in "Architecture : Inches".
For example, in the right line that is: 9'-11 7/8''
What I do is, start the line command, click anywhere on the gril (because it doesn't say where start... so I guess you could click anywhere, although I am not sure about that either). And then I put, @9
I am not able to draws circles and lines etc. using the ribbon or the command line. i am using the correct procedures per the tutorials and I have Google search how to add circles. I click the circle on the ribbon, choose my center point and drag to choose the radius, left click and no circle, same procedure for a simple line.
Is there something that needs to be activated for these to work? I have an activation code which I do not remember using when I installed the software, I only remember using the serial number and product key.
Version: Autocad 2013
I have a problem drawing straight lines. Normally, like everyone, I will start from any given point and the line i wish to draw will snap to 0, 90 or 180 degrees. However there is now no snapping and no straight lines.
I have tried resetting SNAPANG to 0 (it is already set to 0) and this works for maybe the next 3 lines but then I am back to square one and cannot draw a straight line without constantly having to reset SNAPANG.
I've tried resetting USC to world. I've also tried changing PLAN to view and world.
I have received some electrical drawings that i'm making some alterations to. When i try to draw a line between fittings it just disappears. I'm not very experienced with auto cad and only really use it to alter drawings for final designs.
View 4 Replies View RelatedI want to show slope direction in my drawing for a small V-Ditch.
I tried one way by utilizing Measure Command however didnt work out for both face of Concrete V-Ditch because Measure Command aligns the Block on one side of the Line you want to meaure with block.
I have a student who is using AutoCAD 2010 and has Ortho set to on and for some reason it does not draw straight horizontal or vertical lines. They are off by about 5 degrees.
View 9 Replies View RelatedIn order to make a 2D sketch, how can I make appear constructions lines in order to draw a top view from the main view?
View 1 Replies View Relatedwe are using AutoCad 2011 and 2008.When any draw is open everything seems to be just fine, but when we print it out then it came out with lines around the objects(green, grey...)
We have tried 4 different printers with all drivers that we could found on internet, with no success. On the ploter we aren't having any problems and the lines are gone.Also the AutoCad 2006 is without the problems, but we want to move on to the version 11
Is there any setting which we should change?
I'm suffering to draw a circle connect with a arc and 2 straight lines for almost an hour ago.
View 9 Replies View RelatedHow can I draw lines with specific interior angles between them?
For example, if I draw my first line then, I want to draw the second one but with an interior angle of 100deg between them, what can I do?
I have to draw hundreds of lines that have same start point. How can i do this?
I am trying to insert a picture but seem impossible for me. Sow i have lines with the same start point and different endpoints. There is a short way to do this. so avoid to enter the same start point for hundreds times or snap the the same point infinitely... what about Copy with grips or Change command in this case?
Lisp code here for draw for example triple parallel line ? each line will be own layer and color..
View 8 Replies View RelatedWhy the lines sometimes get angular when I draw a circle/curve? How can I make them round?
View 8 Replies View RelatedI'm working in ACAD 2012. I am at times, unable to draw simple vertical lines in the z-axis. Drawing pluming riser diagrams in 3D. Steps I am taking,
1) Opening the drawing.
2) X referencing a floor plan.
3) Changing the view using the cube to SW Isometric
4) Using the LINE command selecting a point, aligning the cursor with what seems like the Z-axis and entering the distance, heighten enter.
The line drawn is flat. This line can be seen as flat when rotating views. The only solution I have found is to use the "Reset Autocad Settings to Default"
Observations: Sometimes I am able to draw in 3D just fine, but something will happen in the middle of the drawing process that will now only allow me to draw flat. Also was never able to draw polylines in 3D is that how it's supposed to be? Used another computer with the same drawing, at first won't allow me to draw in 3D but after a couple attempts will eventually draw in 3D just fine. Tried starting from a blank template, no luck. Tried changing drawing space to 3D modeling and 3D basics, no luck. Also, when working drawings with existing 3D objects, I am able to snap to vertical point as a start point but cannot snap to a point on any other points on the object that at are at a different elevation.
I have this code to draw grid lines within a rectangle:
;Variable settings(defun var_set () (setq *var_lst* '("cmdecho" "osmode" "expert" "plinewid" "dynmode") *var_usr* (mapcar 'getvar *var_lst*)) (mapcar 'setvar *var_lst* '(0 0 2 0 0)) (vl-load-com))(defun var_reset ()(mapcar 'setvar *var_lst* *var_usr*)) (defun *error* (msg) (if (not (member msg '("console break" "Function cancelled" "quit / exit abort" "" nil)) ) (princ (strcat "
Error: " msg)) ) (and ;(vl-bt) (var_reset) ) (princ) ) (defun string-list (data) ;by lee-mac @theswamp (if (vl-string-search "@" [code].........
The above gets me the grid lines; but I have a block inserted at both ends of the grid line; how do I get the selection of those entities (selection set "frame") after each array?
or I would need to map a point list and draw each grid individually how do I go about that?
Attached is the sample of the output I'd like to achieve using LISP.
I am begineer in autocad. I have to draw plot margin like ractangle having 2 horizontal line and 2 vertical line. on vertical line i want to put letters from A,B----- and on horizontal line 1,2,3,----.
View 8 Replies View RelatedI have a very frequent need to draw lines that radiate out from a point on different bearings and distances. I think of this as a sideshot.
_/_
|
Civil 3D’s sideshot command acts differently. It draws lines between the radial end points.
/
|
Do you know what command is needed to do what I want? It is not the Create Line by Side Shot command.
