AutoCAD Visual LISP / AutoLISP :: Code To Draw Grid Lines
Jan 1, 2014
I have this code to draw grid lines within a rectangle:
;Variable settings(defun var_set () (setq *var_lst* '("cmdecho" "osmode" "expert" "plinewid" "dynmode") *var_usr* (mapcar 'getvar *var_lst*)) (mapcar 'setvar *var_lst* '(0 0 2 0 0)) (vl-load-com))(defun var_reset ()(mapcar 'setvar *var_lst* *var_usr*)) (defun *error* (msg) (if (not (member msg '("console break" "Function cancelled" "quit / exit abort" "" nil)) ) (princ (strcat "
Error: " msg)) ) (and ;(vl-bt) (var_reset) ) (princ) ) (defun string-list (data) ;by lee-mac @theswamp (if (vl-string-search "@" [code].........
The above gets me the grid lines; but I have a block inserted at both ends of the grid line; how do I get the selection of those entities (selection set "frame") after each array?
or I would need to map a point list and draw each grid individually how do I go about that?
Attached is the sample of the output I'd like to achieve using LISP.
View 3 Replies
ADVERTISEMENT
Sep 18, 2013
I need a lisp code to convert all Lines, Polylines, Arcs and Splines to Polylines with 0.4 width.
I prepare this:
(defun c:CH2pl ( / SS);changes all lines, plines, arcs and splines to POLYLINE with 0.4 width(if (setq SS (ssget "_X" '((0 . "LINE"))))(command "_.pedit" "m" SS "" "Y" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "*POLYLINE"))))(command "_.pedit" "m" SS "" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "ARC"))))(command "_.pedit" "m" SS "" "Y" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "SPLINE"))))(command "_.pedit" "m" SS "" "Y" 10 "w" 0.4 "")))
But I want pure lisp code in a professional way!
View 9 Replies
View Related
Aug 6, 2013
I have lisp code, which count total length, but I need that it count and multiply by constant which I choose manual (such as in example, total lines yellow length * y + total blue lines * x = ... , example 50*2 + 60 * 3=280),
remember the another code, such as I have d200 with total l=1000 and d250 with total l=1500, i need to count total cost such as 1000*y+1500*x
one think, diameters numbers is not only 1 or 2, it can be many different diameters.
dwg file here:
[URL]..........
lisp file here:
[URL]........
View 9 Replies
View Related
May 8, 2013
Lisp code here for draw for example triple parallel line ? each line will be own layer and color..
View 8 Replies
View Related
Feb 6, 2012
I have to put some trusts between two beam. It sounds easy but i'm unable to handle the divide and round off commands in the lisp. See attachement also.
To draw my trust between the 2 beams, what I normally do, is that I manually take the distance between the two points say it's 10 000 and wrote it down. Then I divide it by my max gap, say 1200, it is the max space between trust.
10 000/1200 = 8.333333 that's the result of how much trust and space between them that i'll need, 8 trusts, 9 spaces between the 2 beams. (That is what I'm unable to do in the lisp, tell it to round off 8.333 to 9 and use 9 for divide command)
What I manually do at this point to draw these trust is that I must create a temporarly line between the 2 beams, perpendicularly to these and divide it by 9.
It gives me 8 cross (or point) to draw my trusts. All this is long to do manually because I have many bay in building and I have to redo this operation for every the bay.
So, what I would like the lisp to ask is:
Specify distance between two beams (Between where and where) :
Specify the lenght of the trust :
Specify max gap: I would like to answer a number here, say like 1200 max
(The lisp should draw the lines on the current layer, color and linetype of the current layer and not draw a line at the beginning and at the end because that's where my Beams are. I hoped you understand, see attachement.
Should also have something that handle a ESCAPE hit or cancel, something like this:
(defun trap1 (errmsg) (command "_.undo" "_end") ; undo end (setvar "osmode" oldsnap) ; restore variables (setvar "cmdecho" 1) ; enable cmdecho (setq *error* temperr) ; restore old error handler (prompt "
[Code] ....
View 4 Replies
View Related
Oct 4, 2012
i am writing something that will draw consecutive lines with a rubberband to be used as a leader from a block's insertion point. this:
(WHILE
(SETQ LN (GETPOINT "
Select Next Point (ENTER to Finish) : "))
(COMMAND "LINE" (GETVAR "LASTPOINT") LN "")
)
works, but does not include the rubber band. i tried:
(WHILE
(SETQ LP (GETVAR "LASTPOINT"))
(SETQ LN (GETPOINT LP "
Select Next Point (ENTER to Finish) : "))
(COMMAND "LINE" LP LN "")
)
which includes the rubberband, but will not exit the loop. The last break source in VLIDE shows that
(GETPOINT LP "
Select Next Point (ENTER to Finish) : ") is casuing an error. Placing
(SETQ LP (GETVAR "LASTPOINT"))
outside the loop causes all lines to be drawn from the same point rather than the endpoint of the previous line.
View 9 Replies
View Related
Apr 3, 2013
I know to get the spacial filter on an xref to get the clip verticies, but not how to tell if its an invert xclip.
Even the arx guys seem to have difficulty with this. How to do it with lisp, com, or arx code?
[URL] ......
View 1 Replies
View Related
Aug 20, 2013
Modify the attached lisp I found in this forum to work using a different hatch pattern, scale and angle. The new hatch should be in default Autocad "LINE" pattern and angle set to 90 degrees (vertical). If possible, I would like the angle and scale to be editable. Find attached Multi_Hatch-45 code posted by CADaStroumph in 2008.
View 9 Replies
View Related
Jun 18, 2013
This lsp was passed on to me from a colleague but he doesn't know where he got it. It does a useful procedure of placing each xref, residing in the drawing, to a unique layer. The layer name is derived from the xref name. I would like to edit this to take only part of the xref name. This system I work with requires all files to have the job number as a prefix eg LE1399901_Contours.dwg, so the xref name would be LE1299901_Contours by default. I want to remove the first 10 characters to be left with "X_Xref-Contours" layer name using this code.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( / ss cnt xrs en ed bn xp xbn )
(setq ss (ssget "x" '((0 . "INSERT"))))
(setq cnt 0)
[code]........
View 5 Replies
View Related
Feb 19, 2012
LISP code to link to a scr.file.I would like to run ACADDOC.lsp with abobe code everytime I open a drawing.But I want to link the KISP file to script file of mine like C:
View 3 Replies
View Related
Sep 22, 2011
Where I can find the DXFIN command code? I want to examine it to see how it does what it does.
View 2 Replies
View Related
Dec 4, 2012
The code removes prefixes bind ($ 0 $), renaming layers, blocks, dimension styles, but some objects do not change the name as linetypes, text styles and duplicate names.If I have an existing name, I want to change the name with a (2) at the end.Example.
Layer: FloorLevel$0$Door90
If the layer "Door90" is existing, is renamed to "Door90 (2)"
(defun c:delprefixe(/ ActDoc Name NewName)(vl-load-com)(defun RemoveBindPrefix (String / Pos LastPos)(if (setq Pos (vl-string-search "$" String))(progn(setq LastPos Pos)(while (setq Pos (vl-string-search "$" String (1+ Pos)))(setq LastPos Pos))(substr String (+ 2 LastPos)))String));
[code]....
View 3 Replies
View Related
May 20, 2013
hiding the modellayout from code.My code is updating the registery properly.but it is not reflecting/hiding the model/layout tabs in application. hide/trunoff from code.Model/layout is not required for my application.Is there any command to hide model/layout tab.
void CMyApp::TurnoffModelViewLayoutTAB()
{
//TurnOff Model View Tab
[Code]....
View 2 Replies
View Related
May 16, 2012
I have the following code in a toolbar button that when I click on a setup within this tool it imports that setup into my current dwg. How to edit this code so that it will continue to import the setup of choice into the new drawing..but in addition....set the new one current & delete all previous setups that were in the drawing?
^C^Cfiledia;0;^Rpsetupin;"K:/_BARONE TEMPLATE FILE-2012/BARONE_PAGE_SETUPS.dwt";filedia;1
View 9 Replies
View Related
May 2, 2013
I'm trying to check for the existence of a drive using lisp, then if not found perform a task (represented in my below example by the alert)
(if (vl-file-directory-p "C: en") T)(alert "exists"))
I know it doesn't work because if I change the T to nil as demonstrated bellow I should invoke the opposite reaction from autocad but instead I get the exact same outcome which is an alert telling me the file exists?
(if (vl-file-directory-p "C: en") nil)(alert "exists"))
View 7 Replies
View Related
Jul 23, 2013
My code returns the error, but it still works.
(vl-load-com)
(setvar "cmdecho" 0)
(vlax-for ucs (vla-get-UserCoordinateSystems (vla-get-Activedocument (vlax-get-acad-object)))
(setq UCSList (cons (vla-get-Name ucs) UCSList)))
(setq FileName (vl-Filename-Base (getvar "Dwgname")))
(setq NewUCSList (vl-remove-if '(lambda (x) (vl-string-search FileName x)) UCSList))
(setq Listlength (length NewUCSList))
[code]....
View 4 Replies
View Related
Oct 11, 2013
With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
View 9 Replies
View Related
Dec 23, 2011
So I can run the following code from the command line with no problem:
(WRK-Insert_Standards_Block '("S:\AUTOCAD\_Common\Linetypes\CSW_Civil-Linetype"))
(WRK-Insert_Standards_Block '("S:\AUTOCAD\_Common\Linetypes\CSW_Survey-Linetype"))
(WRK-Layer_Insert_all "CSW-X-FM_Layers_List")
However when I put it into a macro (custom command to be used from the ribbon) it spits out the following in my command line:
(WRK-Insert_Standards_Block '("S:
View 2 Replies
View Related
Aug 3, 2013
I want to construct lines between every two line ending point by multi selectio window instead of drawing it manually between lines ending point ?
View 3 Replies
View Related
Jun 5, 2013
How do I select the layer in which I want to draw?
for example i draw two line and Each of them has to be in different layer.
How do I select the layer which I want to draw?
View 9 Replies
View Related
Mar 7, 2012
is there a way to draw a polyline and have autocad clip everything outside of that polyline and discard it so that i end up with a smaller drawing. only the information in that polyline, nothing outside of the polyline
View 3 Replies
View Related
Apr 29, 2012
how to draw a text entity in 3d, where I know the 3d ins point, and the plane it should be flat to.
I have not drawn text or inserted blocks programatically before where the plane they lie on is not flat.
I have done it before by setting a ucs and drawing stuff, but now I want no switches of UCS involved.
[URL]
View 2 Replies
View Related
Apr 17, 2013
how I would go about writing a function that would calculate the length of a diagonal of a rectangle using SQRT function? I've been trying but so far nothing!
View 4 Replies
View Related
Sep 24, 2012
I have made a lisp routine to draw lines on polyline. And here are a lot of lines on it. So using comand
"(command "line" pt1 pt2 " ")"
takes a lot of time. Is here a way to creat lines in memory or similar and only then draw them all on screen?
I have search but coudin't find any info. I do not know how to formulate a query.
View 9 Replies
View Related
Sep 18, 2013
I've written my first little Lisp function.What it's for is drawing a simple borehole profile that can then be used to draw stylized cross sections on top of it.
Upon start the lisp, pick a point on screen (to get the X coordinate [x1 below]), then enter ground level at the command line [g1 below], then enter as many thicknesses as are present in the borehole log (will vary, but typically between 3-12). These I added to a list, because that seemed to make sense when I did it.
What I want it to do then is draw a pline from x1, g1 down to the next point (x1,g1 minus the 1st thickness), then the next (x1,g1 minus the 2nd thickness) etc., to the bottom of the borehole.
Then my CAD guys can sit there, and using the borehole logs, enter the values of the boreholes and it draws them on the screen, making it easy to join th dots.
It might be good if it placed a Acad point at each point as well, but I'm not overly bothered about that at the minute.
Here's my attempt so far.
(prompt "Type 'e1' to run...")
(defun c:e1 ( / )
(command "graphscr") (setq x1 (getpoint "
Pick insertion point:")) (setq x1a (car x1))
(initget (+ 1 2 4)) (setq g1 (getreal "
Enter ground elevation: "))
(initget (+ 1 2 2)) (setq lvllist nil ) (while (setq lvl (getreal "
Enter layer thickness <Exit>: ")) (setq lvlList (append lvllist (list lvl))) )
(princ) )
View 4 Replies
View Related
Nov 27, 2013
I would like to be able to draw squares by the area they should have. So that if I need a square of 50m2 autocad automatically draws a square of sqrt(50) x sqrt(50)
Because right now I have to draw 200 squares with 100 different areas and I have to calculate and manually draw each one of them.
View 8 Replies
View Related
Nov 13, 2013
i need a vlisp program to draw polyline between two blocks.
View 3 Replies
View Related
Oct 16, 2013
The first rectangle is drawn from 0,0 at the World Coordinate System. There is never any trouble with the code below when the objects are drawn at the WCS. The problem is when I try to draw a bounding box around an object while in another UCS. It seems that it always draws the bounding box at the WCS instead of my UCS. I have used (trans <pointlist> 0 1) on all combinations it seems and I still cannot get it to draw the bounding box at the current UCS.
(defun c:GetFromBoundingBox (
/
*ACAD_DOCUMENT*
mspace
pSelectedObject
lwLeft
upLeft
lwRight
upRight
[code]...
View 9 Replies
View Related
Dec 22, 2012
I have a slightly unusual query that I can't seem to find a solution for elsewhere. I have an existing OS plan that is 'off grid', and would like to adjust the vertices at the ends of all the existing lines and polylines so that they all sit on a grid point, ie round all vertices to the nearest whole number. Is there a quick command or script that does this?
View 2 Replies
View Related
Jun 20, 2011
I'm trying to define a grid based on polar coordinates.
Can be produced using the following MATLAB
n=1:50000;r=sqrt(n);t=360/((sqrt(5)+1)/2)+1)*pi/180*n;plot(r.*cos(t),r.*sin(t),'o')
I need to insert points based on the polar coordinates defined by the equations. I knew a little bit of LISP 10 Years ago, now it's a total blank. I've been trying to write a script to make this work but after 5 days I'm still without sucess.
View 8 Replies
View Related
Apr 25, 2012
I have a inserted block with 4 tags for Length, Thickness, Elevation and Width.How can extract attributes tag values and draw a closed polyline + 2 internal lines, parallel to the block?
Block Name: ID_DATA
Tags: LEN, THI, ELE and WID.
Each internal line placed in a third width.
View 9 Replies
View Related
