how to remove a background from a translucid/see-through image (where the background can be partly seen behind the image). I included an example in an attachment.
I am able to render anything around the image itself to transparency (using the alpha channel, selection tools, etc.). But in translucent images such as in my example, that leaves what is "behind" the image (that brown stuff in this case).
Before I pass along to you my request, I'd like to point out that I have watched tutorial, after tutorial on how to remove an image from a background. Every thing goes great, "step by step", (my project compared to tutorial) right to the final procedure. Then my image either turns "white/black", or disappears (lets just say the project does not pan out compared to tutorials).But everything is "fine", right up to final phase. How to do the following....
1. Extract an image from a background (any kind) of background.
2. Instruct me how to take the extracted image, and "save" it to file, to use it in "another" project, at a later time.
3. How to take an image (for instance, a large hole in a tree) and take another image, and place it in there. Inside this hole in the tree, I want to take an image, and "blend" it into the hole in the tree. Another wards,I don't want to just place a vivid "sharp" image into the hole in the tree, I want a " halo/gradual fade out from tree, to a gradual fade in to object placed in tree. I hope you understand my description. Basically, going from a sharp vivid image, to a gradual blending of another image in hole of tree.
how I can get rid of the bluish colour around the tree that I have removed the background from (see attachement). I first invert the image, then go to "Components", choose Monochrome, adjust the image to get the black background, and finally go to "Levels" to increase the dark background. However, when I had the mask and do the rest of the sequence, I keep getting the blue tinge of the sky around the object I have cut out.
View 4 Replies View RelatedIs there no quicker way to remove the white (or any other color) background from an image, aside from outlining it?
View 2 Replies View RelatedI am removing the background on a detailed object(s). I removed the initial part..the ants started marching. Then I pushed "control click", and started on another section..the ants started marching on that piece. Then I moved to my 3rd section doing the same. But when you click your final at your beginning on your 3rd section, the ants start marching there also..but you lose the sections you did previously. So I went to "undo", clicked that, and got my previous sections "back".
But my question is..how can I continue taking out the background in this picture...there are a lot of openings between arms and bodies etc., where I need to remove the background. I've tried removing the background on a detailed image one time before, and the same thing happened. Gimp will only allow you to remove so much, and if you try to remove more, it cancels out what you previously tried to remove...how can I continue removing the background on his image, being the image already has an alpha channel over it. If you try to continue after saving the present image to path/invert...you will lose the image your trying to save in the second process.
I have a stock photo of a white and yellow flower isolated on black and when I add an alpha channel and use 'color to alpha' to remove the black background it creates some transparency in the image too.
I understand that this is because it is taking the black out of the flower too but I thought the point of isolating an image was so that the background can be removed.....which leads me to believe that there must be another way of doing this?
I'm making an image with clan crest over tartan. I can remove the white background from the crest, but there are still some odd bits around the very edges. No matter what I try, it always comes out like that. see attached.
View 1 Replies View RelatedI have no problem flipping an image (before one removes the background). It's "after" I remove the background, that I am unable to flip an image. You'd think you could flip an image in whatever state the image is in...is there a way to do it, or not?
View 2 Replies View RelatedI'm trying to expand a translucent image and keep the coloration even throughout. The original image is flat on top and fades to a darker color near the edge. I've tried everything I know how to do (admittedly not much) with no success. I attached a portion of the image to make it easier to understand what I'm dealing with.
View 3 Replies View RelatedGIMP are going to come up with a tool like the refine edge tool that is availale in Photoshop. I really need some way of removing the background of some of the pictures I use. I have attached an example of an image that I would like to remove the background and replace it. I have spent hours trying to work out how to do it successfully.
View 2 Replies View RelatedWhat would be the easiest way to remove the background from this photo?
View 2 Replies View RelatedI received delivery of a company logo in multiple file formats. I'm trying to get the logo added on various sites across the web. How to get the logo to stand on it's own without a background.
We have the following formats: pdf rar ai png jpg tiff bmp and eps
The background is white and I just want that removed so the logo and company name stand on their own. I have attached an example.
I would like to remove items from a photo background. I have two pictures on each, there are two persons obscuring some other elements of the landscape. Is it possible to remove the person obscuring the landscape and keep all landscape?
View 2 Replies View Relatedi've got aimage in a file which i want to remove and replace with a new image. I can remove the image using the lasso tool in photoshop cs3. But what i want to be able to do is get the background space i have removed filled the same as the rest of it,
View 1 Replies View Relatedi have a large number of pictures, they all have the same background image.
The background image is a white-to-gray vertical gradient and has some text on the top.
I created an action to batch remove the background - I use color ranges (Select the Rectangular Marquee Tool and the Right Click anywhere on the image and click on 'Color Range')
In the Color Range dialogue i selected 'Add to Sample' and started clicking numerous times along the horizontal line of my background - I am reminding you that my background is a gradient.
After selecting all of the colors (samples) that are in my background I clicked 'OK' and deleted the selection which leaved me with my image and a transparent background - GREAT!!
This method works great if my image has a high contrast with the background - which is about 80% of the cases.
When i use this action to remove the background from images that have WHITE / GRAY colors in them it comes out terrible since the Color Range selects the background AND bright areas on my image and deletes them.
I have the background image saved as a separate file, I want the Batch Action to check the original background image against all of my images and:
-Detect which parts of the image are similar to the original background
-Delete those similar areas
If that is possible, that would probably be a pretty good way to get rid of the background without deleting anything from my image.
Is it possible to do something like that in Photoshop (maybe using masks?!), or is it possible with any other Image Editing Software?
I have an irregularly shaped graphic that I want to post to a webpage without any surrounding background. Every time I save it, it creates a rectangular background that is visible when I post it to my webpage. How can I make that background invisible?
View 6 Replies View RelatedI am using Xara Photo & Graphic Designer 2013, but I still battle to use the color select and erase tool.
how to use the tool or on any other quick methods to remove the background from a photo.
In this case I am trying to remove the white background. I need to place the wedding ring on a black background.
if it was indeed possible to remove text from an image with rather detailed background. I'm no stranger to Photoshop and the Adobe Family however I've tried several methods and all of them seem to work but finished result looks obviously doctored...
Here is the image, my client wants the price from the image to vanish, while retaining the background!I have tried myself to accomplish such a result but my attempts at this
How do I remove the background from an image? For example a photo of a pipe wrench where all I want is the wrench.
View 2 Replies View RelatedI want to create the effect a clipping mask would have, but for use as an overlay for a motion graphics project, I've tried various methods but the problem I can't resolve is how to do it with the translucent solid color layer as well. I want the text to show right through the gradient tot he video elements it will be laid over, almost like the text was written with an eraser.
View 2 Replies View RelatedI have a pillow bevel applied to a paint splatter brush image, and I'm having trouble with the shadows. I want to save this splatter as a transparent PNG. The problem is that a drop shadow effect is showing up when I save it this way. I think it's a "shading" setting rather than a true drop shadow, as there is no drop shadow set in the layer styles.
The shadow does not appear when a white background is applied. It only shows when the background is transparent. I've tried reducing the shading opacity in the bevel dialogue, and this does get rid of the drop shadow....the problem is that it also removes the shading from the paint splatter, making the image look flat instead of raised.
I have a photo that includes the date the picture was taken on the front of it. The text is in yellow and part of the date covers my suited arm. My question is how can I remove the date, and have the area where the date was reflective of the colors that are in the background (i.e., my suit is gray, so I want the area that the yellow date originally covered, now to appear the same color as my suit.
I am using GIMPshop 2.8.8(?)
I like this image if only I could remove the branch. Also what is that called in the lower right hand corner? Is that aberration? Could that be removed by GIMP as well?
View 4 Replies View RelatedAttached is a .png. There is a lot of white space surrounding this image and all I want is the image. What is the easiest way to remove the white space?
View 2 Replies View RelatedI need to round the top corners of a simple gradient image to use as a header background for a custom web page using a border-radius: 1em.
For some reason I just cannot get rid of the white corners on the image. I used the same
steps given here to create the image with the rounded top corners:
[URL]........
1. Select -> Rounded Rectangle...
2. with Rounded Rectangle selected I used the regular Rectangle select tool to add "square" selection to the bottom of the Rounded Rectangle select.
This is the header background image:
Here is what it looks like on the page so far, as you can see, the radius on the image corners looks consistent with the border:
But if you look at this it appears the image corners themselves are still squared, the white voids are covering the border.
If I have a picture with a transparent overlay, along with a nontransparent version of the overlay, is there a way I can remove the overlay from the original image?
One application for this would be removing GUIs from video game screenshots.
step 1) I remove the background of my image with the color to alpha method, isolating the part of the image i want.
step 2) I then use color select tool to select all the transparent area that was left behind from step 1.
step 3) I create a new layer.
step 4) Then I use the bucket fill tool to fill in the area on the 2nd layer that was selected in step 2.
This is where I run into trouble. On some pixels where the color filling meets dotted line area (made by color select tool) the color comes out translucent. I don't want this to happen. I want it to be solid ff00ff (color hex) without the random reductions in opacity.
I'm working with sprites and the emulator i use has ff00ff as transparent. I'm getting random pink color coming out of the edges of my sprites. These little specks of pink should not be appearing in game because it is supposed to be read as transparent. i suspect that these specks coming out are related to these translucent hiccups made in gimp.
I have two versions of a photo. One is the original, untouched version and the other has a translucent overlay on it. How would I go about isolating the overlay (for reuse)?
View 2 Replies View RelatedIs there a way to remove marks / pimples/etc without "corrupting" the rest of the image?( I mean without being obvious that the image was altered/processed.
View 3 Replies View RelatedWhat is the best way to remove the text from this image (an RPG menu) so I can make my own game menu out of something completely different? I would also want to remove the character icon... + all current text.
View 5 Replies View RelatedI can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
View 7 Replies View Related