I received delivery of a company logo in multiple file formats. I'm trying to get the logo added on various sites across the web. How to get the logo to stand on it's own without a background.
We have the following formats: pdf rar ai png jpg tiff bmp and eps
The background is white and I just want that removed so the logo and company name stand on their own. I have attached an example.
I was asked to cut out the background from a logo to make it transparent so the logo would look nice on a variety of backgrounds. I've been given a good quality jpeg file.
What I did was I selected (by colour) the background (white), inverted the selection, copied it and pasted as a new image.
It's all fine (the logo itself doesn't have any other elements) but there's still some whiteish/greyish outline around certain elements of the logo.
If I were to do it manually, it'd probably take ages. What would be the best way to accomplish it?
GIMP are going to come up with a tool like the refine edge tool that is availale in Photoshop. I really need some way of removing the background of some of the pictures I use. I have attached an example of an image that I would like to remove the background and replace it. I have spent hours trying to work out how to do it successfully.
View 2 Replies View RelatedBefore I pass along to you my request, I'd like to point out that I have watched tutorial, after tutorial on how to remove an image from a background. Every thing goes great, "step by step", (my project compared to tutorial) right to the final procedure. Then my image either turns "white/black", or disappears (lets just say the project does not pan out compared to tutorials).But everything is "fine", right up to final phase. How to do the following....
1. Extract an image from a background (any kind) of background.
2. Instruct me how to take the extracted image, and "save" it to file, to use it in "another" project, at a later time.
3. How to take an image (for instance, a large hole in a tree) and take another image, and place it in there. Inside this hole in the tree, I want to take an image, and "blend" it into the hole in the tree. Another wards,I don't want to just place a vivid "sharp" image into the hole in the tree, I want a " halo/gradual fade out from tree, to a gradual fade in to object placed in tree. I hope you understand my description. Basically, going from a sharp vivid image, to a gradual blending of another image in hole of tree.
What would be the easiest way to remove the background from this photo?
View 2 Replies View Relatedhow I can get rid of the bluish colour around the tree that I have removed the background from (see attachement). I first invert the image, then go to "Components", choose Monochrome, adjust the image to get the black background, and finally go to "Levels" to increase the dark background. However, when I had the mask and do the rest of the sequence, I keep getting the blue tinge of the sky around the object I have cut out.
View 4 Replies View RelatedIs there no quicker way to remove the white (or any other color) background from an image, aside from outlining it?
View 2 Replies View RelatedI am removing the background on a detailed object(s). I removed the initial part..the ants started marching. Then I pushed "control click", and started on another section..the ants started marching on that piece. Then I moved to my 3rd section doing the same. But when you click your final at your beginning on your 3rd section, the ants start marching there also..but you lose the sections you did previously. So I went to "undo", clicked that, and got my previous sections "back".
But my question is..how can I continue taking out the background in this picture...there are a lot of openings between arms and bodies etc., where I need to remove the background. I've tried removing the background on a detailed image one time before, and the same thing happened. Gimp will only allow you to remove so much, and if you try to remove more, it cancels out what you previously tried to remove...how can I continue removing the background on his image, being the image already has an alpha channel over it. If you try to continue after saving the present image to path/invert...you will lose the image your trying to save in the second process.
I have a stock photo of a white and yellow flower isolated on black and when I add an alpha channel and use 'color to alpha' to remove the black background it creates some transparency in the image too.
I understand that this is because it is taking the black out of the flower too but I thought the point of isolating an image was so that the background can be removed.....which leads me to believe that there must be another way of doing this?
how to remove a background from a translucid/see-through image (where the background can be partly seen behind the image). I included an example in an attachment.
I am able to render anything around the image itself to transparency (using the alpha channel, selection tools, etc.). But in translucent images such as in my example, that leaves what is "behind" the image (that brown stuff in this case).
I would like to remove items from a photo background. I have two pictures on each, there are two persons obscuring some other elements of the landscape. Is it possible to remove the person obscuring the landscape and keep all landscape?
View 2 Replies View RelatedI have a black logo with complex lines, text, etc. The only copies I have of the logo are with a white background (probably from having been saved on a document page?). I want the logo to have a neutral/clear background so that I can paste it on pages with gradient backgrounds, etc. and not have the white show.
View 2 Replies View RelatedI'm making an image with clan crest over tartan. I can remove the white background from the crest, but there are still some odd bits around the very edges. No matter what I try, it always comes out like that. see attached.
View 1 Replies View RelatedI have no problem flipping an image (before one removes the background). It's "after" I remove the background, that I am unable to flip an image. You'd think you could flip an image in whatever state the image is in...is there a way to do it, or not?
View 2 Replies View RelatedI am working on an extracted image that contains a logo and a transparent background. I cannot figure out how to change the background of the extracted image leaving the logo with the same colour. I will also like to learn how to change the colour of the logo.
View 3 Replies View RelatedI created a logo and then opened it as a layer so that I can make a website header image. It is shown here [URL] and as you can see the background is an off-white colour. It is probably unnoticeable to many, but I would prefer to get it right. How can I make the background a pure white so that it blends in with the white of the wordpress theme?
View 3 Replies View RelatedI've tried removing the text from the lower portion of this image so I can use it as a walpaper, but it turned out looking pretty nasty.
View 9 Replies View RelatedI am trying to remove text from a logo with a white background. I want to use the text for something else but how do I do this when there are no layers?
View 2 Replies View RelatedI am creating animated buttons for my new topsite pages and cannot seem to rid my image of the white border around the logo in both layers. I first used the polygon lasso tool to crop the logo from the original image and pasted it into a transparent background. I then turned it into an animated gif. Any ideas on how to remove the white edges from around the black ring of the logo (see image) I've just about tried everything I can think of. You probably cannot see what I mean with this background, but on a darker background like blue or green it is really noticeable.
View 9 Replies View RelatedI've been looking through the net for an answer to how to remove a background from an image. I saw the tutorial on this site but it didn't help in removing the background from the image I am using.
The background I want to remove is almost like a shadow so it is difficult to distinguish the colours, as everything is black,white and grey. I tried using color range and the magic wand but nothing works.
I have a really funny animated gif I wanna remove the white background on, thus making it transparent.
The image is opened in Adobe ImageReady CS and I can see it contains 185 layers. I am a nOOb on Adobe ImageReady CS, but know a lot about Adobe Photoshop CS.
I have a picture of a logo with a white background.
I would like to remove the surrounding white background around the logo.
I tried 2 ways to try and accomplish this (using the color picker and deleting, and using the magnetic lasso and cutting). Both methods left me with a sloppy looking logo.
I have been trying to remove a background from a couple of different images.
If someone that uses E3 or E5.
change or remove a back ground from a photo? I can remove the unwanted area, but when I create a new background, the people look cut out. I have tried to set the selection feather to about 10, but they still look like I cut them out. The background is a solid color (ugly yellow) and I am trying to change it to look like a studio canvas. You know with what looks like clouds? I have used the clouds filter and the difference clouds.
I have also tried a drop shadow in the back, and while that improves it a little, still not the look that it needs to be.
how can we extract a part of a picture. Say for example I want to extract my picture from one of my prevailing photos and paste it on some other background, how can that be achieved. I tried tools like Magic Lasso, Magnatic Lasso etc and even appled the feather feature, but even then when I paste it on some other background, any one can make it out. The most difficult part is with hairs. I am attaching some pictures which I randomly found on net. Please guide me as to how can I exrtact them from their present backgroung and paste them to a new one without anyone coming to know about it.
View 4 Replies View RelatedI have a background ( a brush that i downloaded as a template). I also have designed a logo. I want the logo to be superimposed on the background...but there is a white square edge around the logo blanking out the background.
Can you tell me how i can make the background of the logo transparent so that i can see the graphic background?
How do I remove the background of a photo and "save" the remaining subject(person) using Windows?
View 4 Replies View RelatedWhat's the best way of removing this pelmet?
I've been told the tall lady is too orange (the bride is very pale), but having got it wrong once with another orange lady, what in you view is the best way of taking out some of her fake tan?
Last I did this, what looked okay on screen did not look good in the prints as whilst I took some of the tungsten orange out of the room's glow, it seems that the ladies lipstick had the same tone - thus the result was that it looked like she's been a feeding vampire not 2 minutes before the picture such was the impression of blood on her lips!
Lastly, if I want to blow out the highlights here in the window as there's still some details from the 'orrible net curtains, what do you recommend?
Using CoreDRAW, so I drag a PNG from the web ([URL]......) into CoreDRAW. The image shows up perfectly, but the background is black. I know it is a transparent image because the background is white on the web page. I want to make the background transparent.
Also, after the image is transparent, I want to extrude just the visible part. Will I be able to just "Convert to Curves" and then extrude?
Philadelphia Color on Flickr - Photo Sharing!
All i want to do is remove the white so that I can put in a blue sky. I have selected the white (with quick selection) and deleted it. I even unlocked the layers, so once I delete I see the checkerboard. I try to place the image in Illustrator. The white comes back!
I am designing a catalog however the photos have a background, for
example the pictures are of shoes but i can see the table the shoe is
sitting on and the background behind the shoe, is there a way to cut
the shoes out in Photoshop so the background is removed?
