What is the best way to remove the text from this image (an RPG menu) so I can make my own game menu out of something completely different? I would also want to remove the character icon... + all current text.
View 5 RepliesWhen I was running GIMP 2+ under Win XP all icons of *.xcf displayed the image in the icon.
Under Win 7, only the GIMP icon is displaed. Is there a CODEC or other method to have the *.xcf image to display properly as an icon?
making my desktop icons. I stated out with either a jpg or png image. Using gimpshop I get the image resized and it looks fine. However, after exporting as an ico the image is very recognizable but shorter and fatter. I use to use photoshop so with gimpshop I look for something that said retain aspect ratio but as of now I haven't found it. It seems to adjust both width and height when I scale it but something happens during the export.
View 4 Replies View RelatedBefore I pass along to you my request, I'd like to point out that I have watched tutorial, after tutorial on how to remove an image from a background. Every thing goes great, "step by step", (my project compared to tutorial) right to the final procedure. Then my image either turns "white/black", or disappears (lets just say the project does not pan out compared to tutorials).But everything is "fine", right up to final phase. How to do the following....
1. Extract an image from a background (any kind) of background.
2. Instruct me how to take the extracted image, and "save" it to file, to use it in "another" project, at a later time.
3. How to take an image (for instance, a large hole in a tree) and take another image, and place it in there. Inside this hole in the tree, I want to take an image, and "blend" it into the hole in the tree. Another wards,I don't want to just place a vivid "sharp" image into the hole in the tree, I want a " halo/gradual fade out from tree, to a gradual fade in to object placed in tree. I hope you understand my description. Basically, going from a sharp vivid image, to a gradual blending of another image in hole of tree.
I have a photo that includes the date the picture was taken on the front of it. The text is in yellow and part of the date covers my suited arm. My question is how can I remove the date, and have the area where the date was reflective of the colors that are in the background (i.e., my suit is gray, so I want the area that the yellow date originally covered, now to appear the same color as my suit.
I am using GIMPshop 2.8.8(?)
how I can get rid of the bluish colour around the tree that I have removed the background from (see attachement). I first invert the image, then go to "Components", choose Monochrome, adjust the image to get the black background, and finally go to "Levels" to increase the dark background. However, when I had the mask and do the rest of the sequence, I keep getting the blue tinge of the sky around the object I have cut out.
View 4 Replies View RelatedIs there no quicker way to remove the white (or any other color) background from an image, aside from outlining it?
View 2 Replies View RelatedI like this image if only I could remove the branch. Also what is that called in the lower right hand corner? Is that aberration? Could that be removed by GIMP as well?
View 4 Replies View RelatedI have some text icons on my phone size 48x48.. i am trying to get them chrome / metallic . Is there an easy way 9well easy for me way ) to do it . i have followed this
[URL]........ and all the other ones are the same but am stuck i just cant seem to do it .
I am removing the background on a detailed object(s). I removed the initial part..the ants started marching. Then I pushed "control click", and started on another section..the ants started marching on that piece. Then I moved to my 3rd section doing the same. But when you click your final at your beginning on your 3rd section, the ants start marching there also..but you lose the sections you did previously. So I went to "undo", clicked that, and got my previous sections "back".
But my question is..how can I continue taking out the background in this picture...there are a lot of openings between arms and bodies etc., where I need to remove the background. I've tried removing the background on a detailed image one time before, and the same thing happened. Gimp will only allow you to remove so much, and if you try to remove more, it cancels out what you previously tried to remove...how can I continue removing the background on his image, being the image already has an alpha channel over it. If you try to continue after saving the present image to path/invert...you will lose the image your trying to save in the second process.
I have a stock photo of a white and yellow flower isolated on black and when I add an alpha channel and use 'color to alpha' to remove the black background it creates some transparency in the image too.
I understand that this is because it is taking the black out of the flower too but I thought the point of isolating an image was so that the background can be removed.....which leads me to believe that there must be another way of doing this?
how to remove a background from a translucid/see-through image (where the background can be partly seen behind the image). I included an example in an attachment.
I am able to render anything around the image itself to transparency (using the alpha channel, selection tools, etc.). But in translucent images such as in my example, that leaves what is "behind" the image (that brown stuff in this case).
Attached is a .png. There is a lot of white space surrounding this image and all I want is the image. What is the easiest way to remove the white space?
View 2 Replies View RelatedI need to round the top corners of a simple gradient image to use as a header background for a custom web page using a border-radius: 1em.
For some reason I just cannot get rid of the white corners on the image. I used the same
steps given here to create the image with the rounded top corners:
[URL]........
1. Select -> Rounded Rectangle...
2. with Rounded Rectangle selected I used the regular Rectangle select tool to add "square" selection to the bottom of the Rounded Rectangle select.
This is the header background image:
Here is what it looks like on the page so far, as you can see, the radius on the image corners looks consistent with the border:
But if you look at this it appears the image corners themselves are still squared, the white voids are covering the border.
If I have a picture with a transparent overlay, along with a nontransparent version of the overlay, is there a way I can remove the overlay from the original image?
One application for this would be removing GUIs from video game screenshots.
I'm making an image with clan crest over tartan. I can remove the white background from the crest, but there are still some odd bits around the very edges. No matter what I try, it always comes out like that. see attached.
View 1 Replies View RelatedI have no problem flipping an image (before one removes the background). It's "after" I remove the background, that I am unable to flip an image. You'd think you could flip an image in whatever state the image is in...is there a way to do it, or not?
View 2 Replies View RelatedI want to remove text
[URL].......
from this logo:
[URL]........
I tried with some tutorials, but they were only for simple images.
i took a pic and put this text on it but I don't know how to remove it. I only have this crappy old photoshop that has the eye on it.
View 9 Replies View RelatedI remember there was a way of doing this. I would like to remove text from a scanned image and have the background from where the text was previously so it can be edited.
View 3 Replies View RelatedIs there a way to remove marks / pimples/etc without "corrupting" the rest of the image?( I mean without being obvious that the image was altered/processed.
View 3 Replies View RelatedI am using a variable that is being called up from a .csv file for a file name. By default this variable automatically includes a comma due to it being called from a .csv.
How to remove a character ( , ) from a variable? I'm not sure if this is along the right line or not, but i used the READ function to read the variable as a string (i think thats how it works?).
I recently upgraded my 07 macbook pro to a 2012 macbook pro with retina display running 2.6 GHz Intel Core i7 with 16 GB 1600 MHz DDR3 memory. I had no issues with my old mac the entire adobe ran perfect now I am having issues with Illustrator CS5. Each time I navigate the character drop down menu Illustrator crashes on me. I get this page:
Process: Adobe Illustrator [797]
Path: /Applications/Adobe Illustrator CS5.1/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier: com.adobe.illustrator
Version: 39 (15.1.0)
Code Type: X86 (Native)
Parent Process: launchd [126]
User ID: 501
[code]...
if it was indeed possible to remove text from an image with rather detailed background. I'm no stranger to Photoshop and the Adobe Family however I've tried several methods and all of them seem to work but finished result looks obviously doctored...
Here is the image, my client wants the price from the image to vanish, while retaining the background!I have tried myself to accomplish such a result but my attempts at this
I'm using GIMP 2.6.11 on Windows 7 x64. As you can see from the following screen shot, the menu's text is black on blue highlight, which makes it very hard to read. I'd like to know how to fix it. Funny thing is, it doesn't happen on Windows XP.
View 1 Replies View RelatedI need to convert a PNG image to an icon in Windows icon format.Can I do that in XDP7?
View 9 Replies View RelatedI am while i am tryng to insert right to left text (hebrew) in to a tag lable.
while I type I use the context manue to change reading order but when i finish typing it changes back.
I tried to manualy insert a unicode RTL control character from the context manu, but it doesent have any effect.
I hope I am missing somthing and its not a bug( entering long text (in hebrew) is criticle for notes and scheduals)
RAC 2014
win 7 64bit
When designing a sign for a customer, I take a photo of the existing signs, place on a new document in illustrator cs6, type text then scroll through the text character drop down menu to match the new sign text to the font that is currently on the customers signs, business card etc.
There are many different types of fonts and I would prefer not to have the adobe system fonts, asian, arabic and other fonts that are not used for my purposes.
Is there a way to remove them from this list.
I have tried deleteing them from the window 7 font manager but they are essential system fonts and it displays a message that some programes will not work if I delete them.
I have tried show/hide in the windows 7 font manager but this has no effect on the fonts displayed in illustrator.
how to remove the route line from the video and only keep the icon moving?
View 1 Replies View Relatedis there a menu which has the icons for endpoint and midpoint. If not is there a way to create and icon that corresponds to these commands? I use these commands continuously and get tired of typing them in.
View 2 Replies View Relatedthere's nothing in that dropdown menu for you to select your source image/layer in the Move Path plugin.I am using an XCF (Gimp) file, with many layers. I selected a particular layer, then I opened the Move Path plugin.
View 2 Replies View Related