I don't draw line art but I borrow the free ones and color them, and I was wondering how I do layers because I have tried before and it just isn't working, and I need them because it makes it makes it easier to do. I have been managing without them.
View 1 RepliesI have seen mention of a utility called xcf2png which can extract layers from a XCF file and write them to a PNG, but it seems there is no Windows version.
Any way of doing this under Windows/DOS? I just want to extract a layer by name and write it to a PNG file with the same name as the layer.
Or even better - searches a XCF file for layers that (say) start with an underscore and exports only those layers to separate named PNG files.
I would like to use the Bash command line to open two images into GIMP, each image on a layer. The code below opens the two images into separate GIMP windows.
>> gimp image1.jpg image2.jpg
How can I open the two images into one GIMP window and two layers?
I found out that you can't change line color in the line nova because a fix to prevent white on white or something like that. Is there another way to change the line color.
View 6 Replies View RelatedI've just recently caught up to 2.8 (From 2.4 something or other believe it or not ) and amongst a couple of things I have to say I don't like is the fact that previously when setting a path, if I wanted it to be either perfectly horizontal or vertical I could see by the steps in the path preview line whether it was or not.
With the new version, initially at least, that's no longer the case. As I tend to work with straight lines a lot of the time it's proving to be a bit of a pain. Is there any way to set the path preview line to show the steps again to indicate a straight line.
my gimp 2.8.6 makes majority normal layers turn into text layers..
Even if i "discard text information" from layer..and then save it as .xcf it doesnt work! Same layers appear as text layers when i open that .xcf Its not a big deal but it really slows me down when im working with layers..
I merged my layers down to scale to proportion and I thought I was done with the project, so I saved it and exported. I then learned that I did something incorrectly, so I went back to the project only to remember I merged the layers and I don't know how to undo that. How do you revert the layers back to layers?
View 4 Replies View RelatedI'm using GIMP 2.6.11. When I use the line tool and left click + shift to snap a line from point to point, there's no preview line that shows exactly where the line is going to be drawn. In former version(s) of GIMP, I could clearly see where the line was going to be placed because of this feature. I miss it because when doing technical drawings precision and exact angles are needed. Is this feature not included with GIMP 2.6.11? How I can get this tool to work like it used to?
View 2 Replies View RelatedI'm creating a simple map for a non-profit event. I'd like to draw a white line (road) with a black outline to provide definition - it's simple a line within a line. Additionally, I'd like to save the setup for reuse as a default setting of some type to easily recall.
View 2 Replies View RelatedI'm currently using Illustrator CS6 as a test version and when I use the pen tool to make a beaver (school assignment), it all end up in one layer. I want to have a new path-layer from every line with the pen tool, so I can remove lines in the layer panel too. At the moment it's one layer that have a picture of a beaver and I can't see the individual lines I've drawn. When I used CS5 recently I didn't have this problem. Is it a setting I can change or does it have something to do with the news in CS6?
View 1 Replies View RelatedIs it possible to set a line weight for a different layer, so that when you switch layers the line weight default switches with you?
View 3 Replies View RelatedThe issue I run into is when I make a photo black and white and bring out a single color by selecting the areas of color with the magic selector. Once I have the colored area selected I either invert and turn the rest of the image black and white, or I will create a new duplicate layer and delete out the content in one layer and eventually merge the color and black and white layers to make my final image.
My problem is I always get a white gap between the colors and black and white images, or layers. I have tried to use the refine edge menu option, but this never solves the problem as the feather option, and move edge option do not cover the gap, they just move it.
I have resorted to using the healing brush to hide the line or merge the colored and black and white layers together. The issue with this is some times it is in a highly visible spot and the healing brush does not always make a great look. In other words you can tell that I merged two colors or images together.
I have also have this issue when I use the selection tool on images I blur certain portions of. It seems to happen any time I am using the selection toold and I assume there is a standard way of avoiding this.
I am using elements 11.
I only have one layer in the document - it is not locked. I have already tried locking it, unlocking it, creating new layers, locking/unlocking those.I am not able to access Object>Unlock All.
I have done Hide All Layers/Show All Layers - so there is nothing hidden..I have even opened a previous project, and it has the same symbol on it and none of these methods of correcting it works either. It printed fine on Friday.
When I create an entirely new document, the icon is still there.
I'll add a layer It will have ants around
I'll move it around and position to where I want it
Question 1: how do I get rid of the ants? I've googled on how to deselect, but can't can't find an answer
Question 2: I don't know what I do... but by selecting other tools or just clicking around like mad - the ants go away. Yippeee! Except... damn! The layer has now gone into the background and I can't move it around any more
Inv2009. SP2.
The company I'm working for has used inv for over 5 years, but does not use idw's. (or the inventor dwg(idw junior))
The reason is that the on vessels we need to show some hidden lines and ommit others and the layers need to be our standard.
I'm trying to get us on track with the idw process which I'm used to using, I hate not having the link between the 2d and 3d stuff, a lot of rework.
Anyways I'm turning visibilty off on some hidden lines and changing the layer manually most of the time in the idw.
This is a bit time consuming but not to bad, what's killiing me is that when I save, re open, or do most anything with the idw or model; the lines I, right clicked turned vis off on reappear the layers I assigned (right click again) in some cases turned back to default, or in other cases turned to whatever they wanted to.
I’m currently working on getting a system for easier plant layout management. Part of which is condensing what started as 195 mostly random layers into about 15 usable layers.
Problem:
I have about 28 more layers that need to get rid of and I can’t delete them because there are lines assigned to them. However, when I hide all the layers I need so that only the unnecessary layers are showing, there’s nothing there.
Side Note:
I know this problem is most likely because there were layers applied to features deep within blocks. I just don’t want to go through the 700+ block to check each layer assigned to each line.
(This file I was given to start with is a mess. Examples: Some of the blocks have the same exact feature that’s buried 7 blocks deep with no features added to justify an extra bock being there. Some of the blocks aren’t even being used in the layout. Name of the block has no coloration with the actual thing it represents. Stuff like that…)
Question:
Is there a way of hunting down these layers in the blocks to delete / change them without checking each individual block? Or is it possibly because the layer i need to get rid of is applied to a block that’s not being used in the layout?
Why files received from different architects affect how my plot style prints? I'm using my set plotstyle but plots are almost too light to read. Layers are set to default line weights in both files. This printing problem happens in both model and paper space. Using AutoCAD 2012 standard.
View 8 Replies View RelatedHow I can select all layers using the command line?
I am going to write a piece of lisp which will reset all the lineweights for all layers to default and have started by doing it manually on the command line to see what I need to automate.
To start with I choose -layer then LW then type default and it is here I have a problem. It asks enter name list of layers for lineweight default which is where I need to choose all.
All of a sudden, though I've change nothing, my line properties are messed up, here are some of the issues
1) My line type no longer works (via layers or directly)
2) My text section within line properties no longer shows up in order to access 'text overide'
3) I can no longer change the line color.
I have to annotate a lot of pipes and valves with the correct line numbers. Each line/valve got its own layer name equal to the line number.
Any annotation tool that can annotate such lines by clicking on the line and then get the layer name automatic in the end of a leader,?
how I can put my layers into groups now, but there are a few problems I've seen pop up.
First are foremost, when I disable the visibility on a group, if I use the move tool it will select layers from that group that were visible before the group was made invisible. Seriously, there is absolutely no reason whatsoever that I would ever want to move an individual layer that I can't see. This clearly is a glitch and needs to be fixed.
Second of all there is an issue with a layer's mode when it is in a group. For example, if a layer is set to multiply, if it is set in a group it will only multiply on layers within that group. Now this I can see a good use for, but honestly, it is not how I usually want to use layers. I'm not usually trying to separate the actual graphics in my image, I'm just trying to organize my massively long layer dialogue into something more useful. It's great to collect different aspects of my image and keep them all together. But basically every time I need a multiply layer or other effect, I need it to effect the whole image. To keep it effecting an entire image I have to make two separate groups, each above and below the layer, in order to organize my image.
Now, since there is certainly an advantage that could be given by not having such layers have any effect outside of their group, I can't argue that the feature should be removed. However, I do think it would be fantastic if a property could be added to a layer group that would allow for such layers to effect the image outside of the group or not.
The third thing I have to say about groups is linking. First of all, as it stands, when I activate linking on a layer group it has absolutely no effect, making the option redundant. However, what would be useful is if I could link an entire group to itself and then move every layer within a group in tandem.
Often times I want to move several groups of layers around so I can arrange a composition. For a simple example, maybe I have several images of characters, each built with a layer for flats, lighting, textures, etc. And to arrange the composition I want to move the whole character with all its layers to one spot, then grab another character with all of its layers to another spot.Conventionally, there are only two ways I can do this. Either I flatten each of those groups and move them as single layers, destroying my ability to alter them with any level of convenience, or I have to manually link every layer for that character, move it, un-link every layer, link all the layers in another character, and repeat.But it would be so much nicer if I could link all the layers within several groups, and move each group as a whole without moving any other layers.
Since the link option on a layer group doesn't do anything anyway, it seems reasonable to me that enabling it should have that exact effect. Using the same example, if I have each character in its own group, I activate the link option on all of those groups all at once, and then I can grab a layer on any group and that whole group will move, but not any other layers.Even if it automatically linked all the layers in that group to all other linked layers, it would still be much easier to activate and deactivate the link on just one group each time I move that one group, rather than each individual layer.
GIMP example.docx (Size: 141.1 KB / Downloads: 31) I just found about GIMP several days ago. I really like the features that are offered and cant wait to dive in and play around with it. However, I am getting a bit discouraged because it is not working on my computer the way it does when I visited some u-tube videos. So far I have a problem with the layers. I selected, new, added two layers, therefore I had three layers to work with. When I would toggle between the layers the picture didn't change at all, the screen only allowed me to view the last picture I imported. So, I thought I would hide the third picture and work with the second to see what would happen. I scaled the second picture and it scaled them all (note: the pictures where not linked). I have uninstalled and reinstalled the program and it still did the same thing. I am working with Windows 7 if that makes any difference?
View 4 Replies View RelatedHow can I scale several layers (objects) together?
View 2 Replies View RelatedI was rotating a layer in GIMP but now I can't get off this layer/select other layers.
View 2 Replies View RelatedI've tried multiple images and file extensions, but it seems as though I can't rearrange my layer order anymore. Is there a reason this would happen, or is there a keyboard shortcut I can try?
View 3 Replies View RelatedHow to separate layers in gimp and save them in png format, theres a function for this in photoshop, so how do you do this in gimp? Basically i designed a template and i want to be able to click any layer and save it in png format but its not letting me, or how to save all layers automatically?
View 4 Replies View RelatedHow can I duplicate several layers together ? (in one layer manager)
View 2 Replies View RelatedAlthough I'd like to move all of my layers at once, because I resized my canvas..
I can't even get one to move. What am I doing wrong? I followed these instructions.
[URL]
I am new to GIMP and would like to know how change the name of a layer.
View 1 Replies View RelatedIt is my first time using Gimp and although i have figured everything i needed by myself, but i have a doubt, well im adapting a bunch of sprite work from one rpg maker engine (unknown name) to RPG Maker VX ACE, i have no problem there , the thing is that now i have 3 images that are exactly the same except from the color scheme and i was wondering if it is possible the put all them on a canvas and cut and paste the 3 layers at the same time on another canvas, something like this:
Cut
3 - - - - - - - * - -
2 - - - - - - - * - -
1 - - - - - - - * - -
Paste
3 I I I I * I I I I I
2 I I I I * I I I I I
1 I I I I * I I I I I
And after that i "pell off" each layer and get 3 pictures.
3 I I I I * I I I I I _ 2 I I I I * I I I I I _ 1 I I I I * I I I I I
I've had GIMP for quite awhile but I haven't been able to use it effectively for any projects simply because I cannot open, use, or view the layers dialog box.
I've tried Windows > Dockable Dialogs > Layers - this does not work. And I've tried using the shortcut, Ctrl + L, this does not work either. I've also tried uninstalling/reinstalling GIMP, but this hasn't solved the issue either.