How to drop one image into another.I belief though am not sure it is called pasting in.I have opened the image into which I want to dropand tried paste into in edit but nothing happened??
View 4 RepliesSelecting (in grid view) dragging and dropping image to a new folder copies, not moves image. I want image gone from first folder. It works like that sometimes, but not all athe time.
View 10 Replies View RelatedI have been using some tools successfully, but now when I try to use the Healing, Tool, Patch, Type and some others, the image drops off the screen as soon as I place the tool onto the screen. Then I cannot work on the image.
View 2 Replies View RelatedUsing CS6 Mac, I am un successful in dragging and dropping a scanned image from PS to Illustrator.In the past i was able to do this with CS3 PC.
View 6 Replies View RelatedI have a layered image. I've been dragging photos onto it without any problems. But... there are two images that are now acting weird. The first is my daughter wearing a bright pink jacket. I can drag this image onto any other PS file, but on the one I'm working it is dropping out some of the pink pixels... and leaving it gray.
Then, I've tried importing a Christmas tree image (I'm working on a scrapbook page... nothing super important, but frustrating nonetheless). It's an illustrator file. I can paste into other PS files and it's fine. But again, in this one, it's stripping out the colors and leaving the tree gray. I've attached three photos... the one of the scrapbook page with the issues, and the two others showing how they SHOULD look. What is causing this? I've used Photoshop for years and have not encountered this before.
I'm using PS 6 Extended v 13.0 x 64 on an iMac.
I have been using Photoshop since 1989 when it was a proprietary software developed for the long-gone Barneyscan. Even did a book about whaling in Hawai?i using what by then was an alpha version of Photoshop. Still I am, without question, a newbie, as I only use it for very specific tasks involved with designing books?primarily cropping, correcting flaws and color balancing of historic photos. I am using a Mac G4 running Photoshop 7.0
I have a book going off to press?supposedly yesterday?but I have spent hours trying to do what I am sure is a simple task . . . eliminating a background entirely. I have about thirty of these to do and am getting desperate. Here?s the scenario for one, and if I learn the step-by-step, it will work on all the rest. I have an old Matson Navigation logo which is round but was sent to me within a square. It has, in other words, a gray box around it. I want to place the round logo only?without the box?on a photo in InDesign.
Here is how far I have gotten:
Open the file and size the logo. Done.
Go to Layer> Duplicate Layer> Background copy. Done.
Go to Layer> Delete> Layer> Original Background. Done.
Using Magic Wand> Click on box around circle logo. Hit delete key.
Result is gray checkered background.
Using Magic Wand, click on checkered background to trigger marching ants.
Go to Select> Inverse.
I have what I want?just the logo. I need to figure out the last step in Photoshop so that I can save it as a round object only and then Place it in InDesign.
i have my new fonts droped in my windows/fonts folder and wen i open Photoshop the fonts are not there?
View 9 Replies View RelatedMy InDesign CC keeps crashing and dropping network since I have updated to Mavericks. Is it just my network or are others suffering the same.
View 2 Replies View RelatedI'm working at a new job, on a machine running PS 5.1, running OS 10.8.5 with me set up as a new user on this Mac.
I'm duplicate the file, save as on the documents I'm working on, and these images contain a "." within the name. So, every time I "save as" the file drops the characters after the "." and adds the file extension.
We changed the Finder preferences to show all filename extensions, but that only seemed to work briefly.
I have PSPX3U. Just installed it on my new computer last week. I can't be sure, but I do believe I let it update. I then had the bug where Filters Unlimited filters don't work properly on a raster layer. I had this problem on my regular X3 (not ulltimate) after doing updates. My only option was to un-install PSP and re-install it and not update.
Now on this new computer, I did uninstallinstall and re-installed. I honestly don't remember, but I do think I still had a problem without doing any updates. I think I did one of the updates and my Filters Unlimited was back to working the way it should.
Now today I was working on something and found out that I have the dropping pixels bug. I thought I saw something off the other day. I do know this is a problem and I do see there's a fix. But it says that you have to install update 4 first.My PSPX3U version is 13.2.0.35.
I'm afraid of installing the updates because I can't afford to hae that filter bug again...but I also can't afford to have the dropping pixel bug.I tried to look at the updates to see which one(s) I would need to install, but only the first one tells you if you have a certain version then you don't need it. I couldn't find this for the others...unless I'm not looking in the right spot.
I am using acad 2011, and have noticed that when using the publish command, for more than about 15 sheets, it always drops one sheet, and duplicates one, so I always come out with the correct number of pages, but 1 is gone and one has 2 copies.
View 3 Replies View RelatedI work for a large format printing company. We receive thousands of files every year from many different designers. We started to notice that gradients would drop out of some PDFs when opening them in Illustrator but they would preview fine when opened in Acrobat. I searched high and low for an explanation for this glitch. The only response I received is "Stop opening exported PDFs in Illustrator." The downfall with these workarounds: all spot colors located in the gradients will convert to CMYK mixes. I'm still researching to see if there is a way to keep spot colors intact in these areas.
A little back story: InDesign is converting the gradients into something called NChannel. It enables more accurate handling of color blending by including additional dot gain and color mixing info. Both InDesign and Acrobat have the ability to display these elements whereas Illustrator, from what I’m finding, does not. Which is why we’re seeing gradient elements drop out when opened in Illustrator.
Workaround for CMYK Gradients
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: DeviceCMYK
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select DeviceCMYK in Color Spaces then click ok
Save the PDF
[code]....
I am trying to drag and drop files out of one folder and put into a subfolder in the library module but it wont let me and I am wondering if there is a navigation menu that will allow me to do the same?
View 2 Replies View RelatedI've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
This is incredibly frustrating have to export out a video just to be able to watch it through.
Why would the part list drop "B" characters?
View 1 Replies View RelatedI cannot get this feature of 2013 to work for me. When I grab a selected item and drag it to the new drawing window, I get at round circle with a line through it or sometimes I get a command that says invalid.
View 3 Replies View RelatedI've just purchased a new HP P6-2469ea - uk desktop pc running Windows 8. There appears to be some compatibility problems with Elements 10. Other programs: iTunes. Office and the reinstalled apps etc are fine but when elements 10 is loaded the CPU usage rockets to sometimes over 90% and consistanty remains at 25% when just sat in organizer. This results in the cursor stuttering and on occasion the screen freezes and sometimes dropping out completely. HP believe it is a compatibility problem. Same program combinations work fine on Windows Vista (64bit) and a macbook pro with Apple's current operating system.
View 1 Replies View RelatedI want to relocate my Lightroom 4 - Catalogue file and Catalogue previous files from my computer's hard disk to an external hard disk. Is this possible by simply dragging and dropping the relevant files to the new location?
View 2 Replies View RelatedI have code that creates an attribute and block to be used to show a dimension value.
(setq cirDia 0.40) which returns 0.4, but the next command
(command "attdef" "" "CirATT" "" (rtos cirDia 2 2) "ml" "0,0" "1.5" "0")
returns "0.40"
On my computer (and those in the office with me) the attribute will show a default value of "0.40", but there is a computer in another office (offsite) that when the program is run, they get "0.4". The trailing "0" is dropped.
I have tried changing my "DIMZIN" var from 0 to 1, but that has no effect on the attribute dropping the zero. I just don't know what else that other computer may have set that would affect this variable.
So in an effort to reduce PDF file size, I went to the dwg to pdf.pc3 plot driver and wen tot he custom properties. The dpi is set to:
600
400
400
400
I dropped the top number to 400 and the stucco hatch and AR-Sand hatch both print weird when we print to PDF. Some of the hatch is fine, some comes out too dark. It's pretty weird. If I leave the settings as the default then it prints perfectly fine.
Why those hatches might be affected by dropping the dpi? Everything else appears to print great and the file size is reduced.
When I update my photos in LR 5 from the disk it drops my color label.
View 4 Replies View RelatedAfter the X6.2 service pack everything looked fine at first, but when dropping bitmaps, Draw now regularly complains about missing the color profile. Of course the bitmaps have profiles embedded, and Draw had never complained about those same bitmaps before. Well, I have everything in AdobeRGB or IsoCoated v2 CMYK, and these are also the standard settings in CorelDraw. So it didn't make a difference eventually, colors remained the same to the numbers.
However, I re-calibrated my display a little later, installed the new profile, opened Draw and was shocked: stridently over-saturated colors in bitmap images as well as in vector graphics, nowhere near their appearance in four-color print (they had been pretty close before). In other color-managed applications everything looks fine, only CorelDraw is concerned. It still does respond to display profile changes, it does adjust colors when a different profile is installed, but the over-saturation is always there. Color definitions are not changed and output is as ever, it is only Corel's rendering of display colors.
I believe that this reaction to a change of the system display profile and the ignorance of profiles embedded in bitmaps go back to the same problem with color management.
Is there a registry hack or something to make it recognize color profiles properly again, or do we have to wait for the next SP to fix a bug brought in by the last?
Can I get a sound effect to confirm the dragging and dropping of a file into a collection? I can see the file count increase but a confirmation sound would be very useful.
View 2 Replies View RelatedI'm doing a drag and drop. I'm working on how to check whether the user has dragged and dropped the elements correctly or wrongly in order to display the corresponding animation. That means, all the same type of animals have to be placed together in the same row in order for the animation to display a "correct" feedback, and if the user placed it in the wrong order, it will display the "wrong" feedback. There are 3 types of animals: birds, snakes and insects. The "feedback" animations is in the "feedback_sym".
I have placed a "Reset" button on stage, but it does not appear even after changing the positions on the "Elements" column.
Here is a link to my folder. [URL]
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies View RelatedI am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies View RelatedI have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies View RelatedThe problem is that if one has defined a selected area in an image, using either selection by color or contiguous selection using the 'magic wand' facility, is possible to copy this selection to the Image Map facility of the image, so as to automatically define a set of coordinates as a polygon that can be used for link purposes? Perhaps there is some interim step that is required, or perhaps a special script is required?
View 1 Replies View Related