GIMP :: Crop Files - Saving Stuff To PNG
Jun 18, 2011
I'm starting to get serious about photography. I've shot a batch of photos that need manual processing. There are a couple of steps where I should be able to save one or two keystrokes every time. This may sound minor, but when I have to do it time after time after time, it gets annoying. This is not intended to be a rant, but rather a request for info about changing defaults to speed things up for me.
I'm running Gimp 2.6.11 on Gentoo linux (64-bit). I've looked at"Edit ==> Preferences", but can't seem to find what I'm looking for.
1) I need to crop photos, but the manual "crop tool" is not the best fit. I prefer to use "Image ==> Canvas Size". My problem is that the Width+Height aspect ratio defaults to staying constant. I.e. if I crop the X size, the Y size changes proportionally. I do NOT want that. I have to manually click on the link to break the linkage. Sometimes I forget, which can get really annoying, when cropping in one dimension crops the other as well. How can I change the default to not link the X+Y sizes?
2) Saving stuff to PNG *) After having done any cropping, I obviously want to save my work.Saving to PNG pops up a dialog about "Your image should be exported before it can be saved...", Is there any way to get the PNG save routine to "just do it", rather than popping up a dialogue?
*) If I'm saving to a new PNG file, I get *YET ANOTHER DIALOGUE* with settings for compression/interlacing/etc/etc. I never change the default settings, so this is another extra annoyance to me. How can I get the"save as" command to "just do it"?
I know the above may sound minor, but it does get annoying after the umpteenth time.
View 1 Replies
ADVERTISEMENT
Jun 16, 2011
I'm starting to get serious about photography. I've shot a batch of photos that need manual processing. There are a couple of steps where I should be able to save one or two keystrokes every time. This may sound minor, but when I have to do it time after time after time, it gets annoying. This is not intended to be a rant, but rather a request for info about changing defaults to speed things up for me.
I'm running Gimp 2.6.11 on Gentoo linux (64-bit). I've looked at "Edit ==> Preferences", but can't seem to find what I'm looking for there.
1) I need to crop photos, but the manual "crop tool" is not the best fit. I prefer to use "Image ==> Canvas Size". My problem is that the Width+Height aspect ratio defaults to staying constant. I.e. if I crop the X size, the Y size changes proportionally. I do NOT want that. I have to manually click on the link to break the linkage. Sometimes I forget, which can get really annoying, when cropping in one dimension crops the other as well. How can I change the default to not link the X+Y sizes?
2) Saving stuff to PNG
*) After having done any cropping, I obviously want to save my work. Saving to PNG pops up a dialog about "Your image should be exported before it can be saved... Is there any way to get the PNG save routine to just do it, rather than popping up a dialogue?
*) If I'm saving to a new PNG file, I get YET ANOTHER DIALOGUE with settings for compression/interlacing/etc/etc. I never change the default settings, so this is another extra annoyance to me. How can I get the "save as" command to "just do it"?
View 4 Replies
View Related
Oct 19, 2011
I have a few thousand files that I need to process into colour swatches for a web site. The process entails locating a suitable area of each image, cropping that area to 25 pixels square, and saving the result. Obviously, I need to be able to do this as quickly as possible; ideally with just a single click for each image, and so I'd like to set up a script in order to batch-process the images. Unfortunately, there is no guarantee that a suitable position on one image is going to be at all suitable for another, so a limited amount of interactivity is required.
Is it possible to set up an interactive batch task, or would some other approach be required?
View 6 Replies
View Related
Apr 4, 2013
im trying to make some text appear over a texture, and as I've been using programs such as GIMP and Paint.net before I know from them that you can have layers do this. Layers have depth settings, so layer 1 will be the lowest and so on. But it don't find these settings in autocad.
View 3 Replies
View Related
Apr 9, 2013
i want to simply painting the background orange. However when every i try to the colour comes out light blue, i cant even use the painting brusg what has happened.
Also the scale tool is not working.I want to scale about 30 images (all orginall the same resolution/size/) however whenever i scale each photograph/ image they come out as either something totally different or do not scale at all. im scalling the to about 29mm/43mm
View 2 Replies
View Related
Aug 20, 2011
I've got an image I'm trying to make my wallpaper thats a 1024 x 768 image. My screen resolution is 1680 x 1050 so if I use the image and use the "fill" option to have the image fit my background perfectly it won't fit and some stuff gets cut off. I have to use the "fill" option instead" of "fit" which gives it borders kind of like of how I want because I'm rotating wallpapers and this is the only one that doesn't work under "fill"
What I want to do is just import my image into gimp and then add some paint on the right and left outside the image to make it wider so it would fit as my background without some stuff getting cut out.
Is there a way to import an image into gimp and then add some paint outside the image and then save the new image with the paint outside the original image onto my hard drive?
View 1 Replies
View Related
Apr 9, 2013
Attached is a .png. There is a lot of white space surrounding this image and all I want is the image. What is the easiest way to remove the white space?
View 2 Replies
View Related
Aug 11, 2011
I was positively surprised to find out that many of the options in the tutorial are also in Gimp. However there are something I could not find and I am not sure if this is because they are named differently or else because they are still not there.
The first thing I did not find is "Convert for Smart Filters". In the tutorial it says using this "you can apply filters to the photo while leaving your original in tact. It's a non-destructive way of applying filter effects, as you'll be able to adjust the filters you've applied at any time. First you'll get a message saying the layer will be converted into a Smart Object.".
Another thing I could not find is "Vignette" and "Midpoint"options in Lens Correction (in Gimp I found Lens Distortion) window. Do these exist in Gimp? or can be created with some other filter?
View 2 Replies
View Related
Aug 4, 2012
I am missing a crop tool which can rotate the crop rectangle. Similar to photoshop's tool. I found no way to rotate the crop rectangle in gimp. How do you cut out something from an image if it needs to be rotated while cropping? I tried rotating first then cropping but it does not give me enough precision so I end up with transparent areas at the border.
View 5 Replies
View Related
Feb 26, 2012
I'm scanning old photos from a photo album. There are a lot of these pages, so taking the pictures out and scanning them would be a huge hassle. The photos are too close on most pages for the scanning software to recognize them as separate images and save them as such.
I'd like to save them as individual pictures, both because that's neater and because some require color corrections.
I'd be able to open up the scanned image, select or outline the picture, and have some script save that selection as an individual file. Super ideally the name would be automatically generated, typing in "1" "2" "3" etc gets old, and I obviously don't want to overwrite. And if I could get automatic color correction before saving or in a batch, that would also be great.
View 2 Replies
View Related
Sep 9, 2012
How to clean screenshots that contain text or other stuff overlapped in an image.
Here's an example:
I'd like to know if it's possible to remove the overlapped bits of screenshots in the upper and bottom left corners and the text in-between using GIMP. The second picture is merely for reference of the material missing(I'm not sure if it can actually be used because the quality is not the same, and I believe the colors are a little off). And if it's indeed possible, how it can be done.
View 3 Replies
View Related
May 6, 2013
I'm using Gimp 2.8.4 on a MacBook Pro.
I have been working on an image file for several hours now, and as a result, there were MANY files open (probably over 30).
I attempted to save the file, and recieved the following error message:
"Could not read the contents of [folder name] Too many open files"
I then closed each of the open files except the file I was trying to save, but got the same results.
The same error message pops up when I try to open a file as well.
View 1 Replies
View Related
May 7, 2013
AutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was fullĀ and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
View 6 Replies
View Related
Mar 20, 2012
I keep trying to scale an image down in GIMP but it just crops the image instead. What am I supposed to do?
View 1 Replies
View Related
Feb 25, 2013
Deleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies
View Related
Aug 17, 2013
I have a regular 4 x 6 picture. I want to crop it and then keep that as a 4 x 6 and print out. I also want to deal with "inches" here.
View 10 Replies
View Related
Feb 21, 2013
It'll be useful if we can crop layers based on visibility. AFAIK gimp onlycapable crop current selected only.
View 2 Replies
View Related
Aug 24, 2012
Whenever I use the Crop to Selection tool (with a rectangular selection), it doesn't actually crop TO the selection, it usually leaves an extra pixel on two edges.
View 1 Replies
View Related
Aug 2, 2012
I need to take a logo and blend it in with another picture. I also want the picture of leaves to drape a little over the letters of the logo. How do I do this? I can't figure out how to crop or how to add a 2nd picture to my screen.
View 1 Replies
View Related
Oct 2, 2011
Is there a way to just splice my image up into 16 512x512 squares? like a tile set (which by the way I'm sure my math is screwed up on that so how many squares I need to cut out a 2048x2048 image for 4 on top and 4 on the sides that'd be great. I suck at math)
I tried copping and stuff but I can't seem to use the tools right. I wrote a lengthy detailed version of this but figured it was too much to read so I am editing/cutting all the details out
Also the resize part. nevermind I got it figured, I just had to resize the image and the canvas follows suit. I didn't know that, thought I had to resize canvas first then image like in photoshop.
View 6 Replies
View Related
Sep 16, 2011
I love the GIMP program, even though my attempt at doing my first thing does not seem to be happening.
simply, I have taken a shot of a piece of artwork and I am wanting to crop right at the frame of the artwork. I successfully did the Scissor thing...hovered over the first 'dot' and held down the cntl key...and the marching ants were seen..OK so far.
HOWEVER, (after following a youtube tutorial) when I was at the 'CUT' stage, my crop did not turn white, like in the tutorial--the tutorial was Peyton manning's photo--I think-- so that is the hurdle I have to overcome...All worked well up to that point
--my photo is the first layer, then created another layer, named it, then moved it down one space then deleted one of the layers--I'm doing this from memory now--then did the scissor-thing and then the 'cut' step should have made my artwork all white....but no
View 11 Replies
View Related
Jan 30, 2012
I'm just trying to write a script in order to crop a png file which has a white border.I tried this but nothing change..
View 8 Replies
View Related
Jan 13, 2013
I need to crop-remove slices of lots of of images, so preferably in one single step. Here is a more detailed description: [URL] Since this post is about two years old, I wonder whether this is still unsupported by Gimp.
View 2 Replies
View Related
Aug 6, 2012
I'd like to crop a circle out of an patterned image.
View 3 Replies
View Related
Jul 17, 2012
How to crop a photo to remove the background? Or do I need to go through several of the general tutorials before I can follow a tutorial on cropping?
I found a bunch of cropping tutorials on YouTube, but they used a lot of advanced (to me) terms and seemed focused on difficult situations.
I have 30-40 photos that are of wooden figures cut on a band saw. They do not have highly irregular edges like hair or fuzz.
I am hoping for a tool that can automatically follow the outline and then let me make any minor adjustments that may be needed.
View 11 Replies
View Related
Sep 9, 2011
I'm trying to crop a rectangle that is slightly off square, so the cropping rectangle is either clipping part of the image or not enough of the empty space. Is there a way to clip a non-rectangular area?
The images are actually parts of a map as a specific projection, and need to be clipped non-rectangular so they match up.
View 7 Replies
View Related
May 3, 2013
I need to crop multiple images to the same size and perhaps adjust the position of the crop rectangle a little bit for each image. It seems that gimp forces you to destroy the previous crop rectangle position and size when you start a new crop operation. Is there a way around this?
View 2 Replies
View Related
Jan 27, 2014
Gimp 2.8.6, Windows 7
I do repetitive editing where I use a rectangle select tool with a 7:10 ratio and use the Rule-of-Thirds grid. Sometime selecting the proper part of the bottom part of the image requires that top part of the Rule-of-Thirds grid lies quite a bit above (off the top of) the image. Then when I choose Crop to Selection, the top of the Rule-of-Thirds grid closes and the top of the selection snaps to the top of the image, which is not what I want.
How to make the top border of the image be at the same place as the top edge of the Rule-of-Thirds grid? If it makes any difference to the procedure, I want the border around the image to all be the default white.
View 3 Replies
View Related
Nov 21, 2012
I want to crop an image - it says a dialog box will pop up after I select mycropped area, but no dialog box pops up.
I can't see how to finish the crop and save it.
View 2 Replies
View Related
Jun 21, 2012
I have a question with batch crop. I have about 300 images of same dimension and would like crop to specific position in all of them. In photoshop, I would import all the images as a layer and crop a layer, then export the layer as an individual file.
View 1 Replies
View Related
Oct 24, 2012
Is there any way to crop/convert mts files from 16:9 to 4:3 so it can be used for TV broadcast? We produce a PATV program & some of our partners only output 4:3 so our shows are compressed.
View 6 Replies
View Related