i have taken a photo of a car mirror which has the camera in the shot, I want to keep the shape of the wing mirror but replace the reflection with clouds. After scrolling through many you tube videos I can only find cutting selected image and pasting onto a different background, all I need is a white background the shape of the mirrors edge and clouds as reflection within the mirrors edge, can this be done.
View 7 RepliesI am trying to remove the person in the background of the attached image. I believe I have finally installed the resynthesizer plug-in but am not successful in removing the person behind the couple shown.
View 1 Replies View RelatedI have a photo that includes the date the picture was taken on the front of it. The text is in yellow and part of the date covers my suited arm. My question is how can I remove the date, and have the area where the date was reflective of the colors that are in the background (i.e., my suit is gray, so I want the area that the yellow date originally covered, now to appear the same color as my suit.
I am using GIMPshop 2.8.8(?)
I am currently trying to combine a color photo frame with a black and white image, but every time I open the frame in "open as layers" the frame turns to black and white as well as the photo. I have no problem when using color photos. Is there a way that I can do this so that my photo frame remains it's original color with the black and white photo inside.
View 1 Replies View RelatedI am new to GIMP.
I want to import a photo, trace geometric shapes over the photo like circles and lines, and then remove the photo. I have a very basic understanding of LAYERS. I have viewed a few tutorials. But I don't know how to import a photo or how to get rid of it once I have drawn the geometric shapes over it.
I want to enlarge an image on a digital photo and save the enlarged image as a seperate photo
View 5 Replies View RelatedI am trying to open a photo in camera raw and the image always has a lot of red and blue in the picture? What can I do to avoid this. When I first started learning photoshop this did not happen?
View 5 Replies View RelatedI did use the scissors and eraser tool to cutout unwanted background, and now I have an image I want to save and copy to another photo. The problem is that Elements 11 won't let me open up another photo at the same time, or let me copy the selected image to clipboard to paste on a different photo.
View 1 Replies View RelatedSo I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies View RelatedI am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies View RelatedI have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.
Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:
I have an image window open with a picture a car and I have an image window open with a race track back ground.
I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies View RelatedThe problem is that if one has defined a selected area in an image, using either selection by color or contiguous selection using the 'magic wand' facility, is possible to copy this selection to the Image Map facility of the image, so as to automatically define a set of coordinates as a polygon that can be used for link purposes? Perhaps there is some interim step that is required, or perhaps a special script is required?
View 1 Replies View RelatedI'm trying to write a script to batch process a number of files. I want the script to open file a*.png, convert black color to alpha and paste image b*.png on top of a*.png (both are the same size). The script converts black to alpha, but it doesn't paste image.
(define (batch-alpha-paste pattern pattern2);get the file lists (let* ((filelist (cadr (file-glob pattern 1)))(filelist2 (cadr (file-glob pattern2 1)))) (while (not (null? filelist))(let* ((file-name (car filelist))(filename2 (car filelist2)) (image2 (car (gimp-file-load RUN-NONINTERACTIVE filename2 filename2))) (draw2 (car (gimp-image-get-active-layer image 2)))(image (car (gimp-file-load RUN-NONINTERACTIVE filename filename)))(drawable (car (gimp-image-get-active-layer image)))) ; convert black to alpha(plug-in-colortoalpha RUN-NONINTERACTIVE image drawable '(0 0 0))
[code]....
I call the script from shell:gimp -i -b '(batch-alpha-paste "aa*.png" "bb*.png")' -b '(gimp-quit 0)'
how to copy image 2 into image ?
I'm trying to restore a photo of my mother's sister that was taken on the day of her high school graduation. It's a group photo but here's the piece showing my aunt's face:
This whole photo had a lot of water (and probably mold) damage but the big problem with this section was that it was stuck to the glass. I managed to soak it off but it tore there, and of course that's exactly the part where my aunt's face was. Fortunately I also have a newspaper clipping showing the same photo:
so I do have a reference to go by. Here's what I'm mainly having trouble with:
1) the figure's left eye (on the right side of the face) - I tried the Clone and Heal tools but it just didn't look good so next I tried copying and pasting the other eye, flipping it horizontally, and rotating it a bit to try to get the angle right (I had to hold a ruler to the screen for that; does GIMP have a way to draw a slanted guide line that could be deleted later?). It's not bad, but it's not great either. That was when I remembered the newspaper clipping. I was going to copy from that, and amazingly they are almost exactly the same size (I measured the height of the face in each one) but being a printed piece it of course has dots and it looks awful when copied and pasted.
2) the skin tones - actually this is a problem with the whole photo; the skin tones range from almost white to very gray (actually all the grays range that way ; it's something I've been working on). But my aunt's face is the worst because it's not consistent, probably because of the tear. I've tried doing a free selection around the face and neck and experimenting with some of the color corrections - Auto Normalize and Equalize, Levels, Curves, Brightness/Contrast - but so far it hasn't worked much.
I can include more pieces, or even the entire photo. I just didn't want to take up any more space; I knew this would be a long post. Just let me know.
I am using 2.6.11 in Windows XP Pro SP3.
i was wondering if it would be possible to get a plugin or maybe there's a way to do this that would 'blend' the border of one image that you paste on top of another, larger image. so that the borders wont contrast - like a black dot on a white page.
if that description doesn't make sense, imagine using such a tool on a a black dot on a white page. it would make the outer part of the circle transition from black, to dark grey, to a lighter grey, and then to white...
When you reduce the image quality of a jpeg image , How exactly is it reducing the quality? is it applying file compression , reducing bit depth or is it reducing the sampling rate of the image? or anything close to the above....
View 2 Replies View Relatedi am trying to use it to design button badges on my new laptop. I have photoshop on my old laptop and have lots of psd files that I have been trying to use with GIMP.
I am finding that GIMP is shrinking my images when I import them to different images and when I come to print them on A4 they are smaller than they should be, and so useless to me in making my badges...
Printing the original image from GIMP gives me it in it's intended size though. How can I stop this from happening?
It happend when I import into an A4 - as I need to fit approximately 40 badge images per sheet.
I can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
View 7 Replies View Relatedso I mess up on an image and I have to undo more than once... this has happened to me on MULTIPLE occasions!!! the undo feature won't undo as far as I need to!!! Gimp takes it upon itself to use a later action as the base image forcing to to throw the whole image away and start over because I CANNOT go back any more because it says 'base image' when I have done other things prior to the so called base image in the undo history!!!
what is causing gimp to do this???
I want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
I like to put a border on the photo I upload online.These pictures are usually 600 X 400 pixels.A 2 pixels line is just perfect for my use but...it's impossible to have a 2 pixels pencil.You can create a 1 pixels pencil or a 3 pixels pencil but not a 2 pixels one. Why?
At one point, what I was doing is, select all,then shrink the selection by 5 pixels(yes,I like to add the border inside the image)and then use the marching ants as a guide and trace a 3 pixels wide solid line and then erase a 1 pixel line using the eraser but...it's extremely tricky(and time consuming)because there's no real 1 pixel eraser...it's a cross made of 5 pixels and if you're not just at the right spot it erases the thing just bad.
Also,I use to do it by: selecting all, then shrink the selection by 5 pixels and then strike the selection with my chosen pencil but...the damn line is 5 pixels away from the border of the picture on the left side and on top but on the right side and at the bottom,the damn line is only "4 pixels" away.Sure 1 pixel off seems not that much but on a small picture 600 X 400, it shows a lot. How come the selection can't be stricken with an even result?
I want to modify a photo in order to make it similar to a picture of the Victorian era. But how?
I show you some photos that I want to imitate:
This
This
And this
Any way to get the contour lines (as clear as possible) from a photo?
View 1 Replies View RelatedI want to make a Christmas present spelling out the last name using individual photos of letters (see below). I would like the finished image to be 16x20, and I am going to upload it and have it printed at a photo developing shop. I'm not sure how to set this up in GIMP.
When I set up my new file, how many pixels should I make the new image, if my desired size is 16x20. I'm not sure how many dpi to use when I convert the inches to pixels. I read that 300 dpi is desired.
I was thinking about making image boxes for each letter in one layer and cutting and pasting each letter into the boxes. Is this possible or do I need to make a new layer for each photo?
how can autoconvert many photo files from eps to jpg with GIMP?
View 4 Replies View Related(transferring from gimptalk) -[URL] What do I do with a script?
View 2 Replies View RelatedI have been using GIMP to count the number of birds in a colony by putting a round spot on each bird using the airbrush tool. This works fine as I can size the spot to suit and alter the opacity to leave some detail. But I need to be able to count the number of spots! This should only count the spots and not every time I adjust the viewable part of the photo to keep spotting! An addon to the GIMP program would be wonderful.
View 6 Replies View RelatedTook a photo over skype. It was very tiny, I suppose because the person I did Skype with was using and Iphone. I would like to enlarge it but it gets fuzzy and pixelates.
View 1 Replies View Related