GIMP :: Getting Contour Lines From A Photo
Jan 15, 2013Any way to get the contour lines (as clear as possible) from a photo?
View 1 Replies
ADVERTISEMENT
GIMP :: Import Photo Trace Geometric Shapes Over Photo Like Circles And Lines
Oct 5, 2011I am new to GIMP.
I want to import a photo, trace geometric shapes over the photo like circles and lines, and then remove the photo. I have a very basic understanding of LAYERS. I have viewed a few tutorials. But I don't know how to import a photo or how to get rid of it once I have drawn the geometric shapes over it.
GIMP :: Photo Corners - How To Remove White Lines And Dirt
Jul 27, 2012I'm a furniture maker in Japan, and usually take photos of my work on the road next to my shop. I like the texture of the blacktop. Using Gimp, I'm working up the learning curve, and don't know how to remove the white lines and dirt at the upper corners, and extend the pavement to cover it. I'm hopeful that with Gimp, it can be accomplished.
Attached File(s) rockingchair1.jpg (214.16K)
AutoCAD Map 3D :: SHP To 3D Contour Lines
Dec 28, 2011We have shape file that I imported to MAP 3D using map import, I would like to get the contour lines in 3D and then open them in AutoCAD general and see them in 3D (They must have a z value). How can I do that.
View 3 Replies View RelatedAutoCad :: Create Contour Lines
Oct 19, 2010So I have finally been able to create a surface that I like and slice some 3D solids using this surface. But now I would like to draw some contour lines of that surface. I have seen some videos about creating contour lines (such as this one: URL.... ). But in this video they import the surface using the 'connect to data' button in the toolspace area. Is it possible to insert a surface from your drawing into the toolspace area and then draw the contour lines? I managed to insert the layer containing the surface using Data --> Add drawing data --> Drawing layer... but I cannot change style or create contour lines.
View 7 Replies View RelatedRevit :: Controlling Contour Lines
Feb 28, 2013I have a small residential project with corner lot sloping up diagonally from the intersection. The client wants to raise 'usable' surface of the site by introducing terracing - 3 retaining walls 3' high and 3' apart.
All is interrupted by a driveway and series of steps leading to the main level. I'm trying to modify existing surface, but the topo seems to have 'life of it's own' . I've tried to Split some surfaces to make life easier. That worked to some extent. How to make the topography cooperate? Is there a way to 'turn off' triangulation? ( not the visibility ) . I'm certain the contours I'm creating can be built, but Revit is 'changing' them to something else. Some points that I place are simply ignored.
AutoCAD Map 3D :: How To Make Contour Lines
Mar 21, 2013I want to make contour lines in autocad 2010 map 3d, but dont know how to start and where .
I have xyz coordinates in. txt format , something like this: [URL] .....
I tryed to do with spline, but its pretty hard some times :/. I need something that i can import and let autocad draw the contours, if its possbile (import txt or another format if its possible) !??
AutoCAD LT :: Cannot Import Contour Lines Generated From TIN
Jan 31, 2013I cannot import contour lines generated from a TIN. Not always, but this one time. I receive instead boxes with text in them stating "AeccPbCogoPoint"
how not to get this message and receive actual points and polylines?
AutoCAD Civil 3D :: Contour Lines All One Entity?
Sep 15, 2012I have a client that just started using C3D 2010. When I sent him a topographic survey with contour lines (I am also using C3D 2010) he called me and asked if there was a way to select an individual contour line and have it display the elevation in the 'properties' dialog box. I have not been able to find an answer for him.
View 9 Replies View RelatedAutoCAD Civil 3D :: Broken Contour Lines
May 9, 2012Is there a way to quckly join contour lines that have been broken where the contour elevation is?
example, if this were a contour line ---------501---------
I'd want to delete the contour elevation and join the line to make a continuous contour line.....
AutoCAD Civil 3D :: Contour Lines Not Showing
Jan 3, 2013We recently received a LiDAR data in the form of an .asc file. Brought it fine into Civil 3d.
However, the level data is in mm so levels are showing as 98450 instead of 98.45. The level ranges from 98450 to 166260.
When I create a surface and set the style to show contours, it only displays contour lines below 100,000. Is this a limit in Civil 3D or am I missing some setting somewhere? I'm using the UKIE template btw.
AutoCAD 2013 :: Missing Contour Lines
Jan 18, 2013I have Acad2013 installed on my computer. When I received a Acad Civil 3D dwg I could open it and see all (contour lines, etc.). Later I installed an object enabler Civil 3D (Civil3D_2013OE_64Bit.exe) cause Acad2013/Acad Civil 3D issues onto my computer and now when I open the same Civil dwg in Acad2013 I am missing the contour lines.
View 4 Replies View RelatedAutoCAD Civil 3D :: Disappearing Contour Lines
Feb 23, 2013I’m having some issues with my CAD. Every now and then, my contour lines disappear and I can’t get them to reappear. My surface border and triangles will appear but not the contours. Sometimes if I change surface styles they will appear but other times they are gone forever.
Troubleshooting: Regen AllAuditPurgeLayers on/offLayers frozen/thawedPromoting (if the surface is a data short cut)Changing the surface styleChanging the contour interval
None of this has worked…
AUTOCAD Civil 3D 2013
Windows 7
Processor: Intel (R) Xeon (R) CPU W3565 @ 3.20GHz
Installed Memory (RAM): 12.0GB
System Type: 64-bit
AutoCAD 2013 :: File With Contour Lines
Mar 23, 2013I'm using Autocad 2013 and i have a file with contour lines, with set elevation (z coordinate). I need those elevations to be visible - i mean i need their elevation in a text box near each line. Something like this - [URL]........ How do i go about it?
I've attached the file i need to do this with.
Revit :: Points To Trace Over The Contour Lines
May 11, 2007I have an image of a site. I have used the points to trace over the contour lines. I would like to "Drape" or attach the site image to the toposurface for a presentation without having to create all of the site features manually. Is there a way to do this
View 4 Replies View RelatedAutoCAD 2013 :: Adding Contour Lines To A Map?
Oct 9, 2012how I would go about adding contour lines to a map? I entered roughly 200 points (x, y, and z values) into an x-y plane on AutoCAD and figured that if I were to add contour lines (1' elevation difference), it would rely on the z axis. In short: how do I add contour lines if the points are all plotted?
View 1 Replies View RelatedAutoCAD 2010 :: Adding Contour Lines To Map
Oct 9, 2012Adding contour lines to a map? I entered roughly 200 points (x, y, and z values) into an x-y plane on AutoCAD and figured that if I were to add contour lines (1' elevation difference), it would rely on the z axis. In short: how do I add contour lines if the points are all plotted?
View 3 Replies View RelatedAutoCAD 2010 :: Adding Contour Lines To CAD
Oct 9, 2012how I would go about adding contour lines to a map? I entered roughly 200 points (x, y, and z values) into an x-y plane on AutoCAD and figured that if I were to add contour lines (1' elevation difference), it would rely on the z axis. In short: how do I add contour lines if the points are all plotted?
View 2 Replies View RelatedAutoCad :: How To Trim Unwanted Contour Lines
Jan 29, 2012I have a drawing from a surveyor showing contours which have been formed by 2D polylines. I have tried to trim out a portion of the contours, which i don't need, using extrim command but it doesn't trim any of the contour lines. Even with just the trim command i cannot trim them. i have tied exploding but still not managed to trim. How to trim these unwanted contour lines ?
View 5 Replies View RelatedAutoCAD Civil 3D :: How To Label Contour Lines
Mar 9, 2012How to label the contour lines this way? I wanted to label the contours as shown in screenshot 1, but couldn’t know how to do that.
Which option should I choose to label the contours this way?
AutoCAD Civil 3D :: Contour Lines Display
Sep 19, 2012I am having problems viewing my contour lines after I create a surface. I create the surface using points. The contour lines will show up when I create the surface. After I close the program or the drawing, I am not able to see the contour lines again. The contour lines are on in the surface style. How can I see the contour lines without creating the surface again?
View 4 Replies View RelatedAutoCAD Civil 3D :: TIN Surface Won't Create Contour Lines?
Jul 8, 2013I just upgraded to Civil3D 2014 and Windows 8. When I create a TIN surface using a DEM file no contour lines are displayed. Points are processed and triangles are created and can be displayed but no contour lines. Contour line layers are set to display in the style file.
View 9 Replies View RelatedAutoCAD Civil 3D :: Creating Surface From Contour Lines
Feb 24, 2012I have drawing giving to us for a senior design project. I'm trying to create a surface to so that I can analyze cut/fill. Not sure if what i'm doing is right or wrong, I've never used civil 3d. But i'm getting break-line errors whenever i'm trying to create the surface from the contour lines.
Heres a link i took of what i'm doing on youtube [URL]........
Photoshop :: Contour Lines To Follow Rolling Landscape?
Mar 6, 2008I need to reproduce wavy contour (blueprint) lines which will follow the undulating landscape on a lot of images I have. As per the attachment, they almost have a neon glow and are in a grid format. I can do a grid but adding the wave filter doesn't allow me to adapt it to suit the pic.
View 1 Replies View RelatedAutoCAD Civil 3D :: Contour Lines Not Displaying Correctly
Oct 16, 2012What is the easiest way to correct contour lines when they don't display correct? Adding points, deleting points, switching edges...
See everything circled in orange on attached pdf.
AutoCAD Civil 3D :: Invisible Contour Lines When Plotted
Jun 27, 2013When I plot my dwg my contour lines disappear. Looks good in model and layout but when I plot (usually to pdf) the contour lines do not show. Labels for contours are there. I attached samples.
View 2 Replies View RelatedAutoCAD 2010 :: How To Create Contour Lines On 2011
Aug 23, 2013I have csv file of co ordinates (x,y,z) I surveyed, I have to produce progress drawings showing stockpiles, boundary etc. , which I can do easily enough by uploading the co ordinates. I would like to include contour lines in the drawing but how to go about it. I have spent a while searching online & I'm even more confused, most discussions refer to TINs and triangulation but not sure how to go about it. I have a survey of the site survey csv file prior to any works carried out & that is what i would like to base my contour lines on. The site is relatively flat, about 4 acres in size, relatively even rectangle shape with fall of 200mm from north to south & fall of 2.5m from east to west.
View 5 Replies View RelatedAutoCAD Civil 3D :: Make Surface From Contour Lines
Oct 24, 2013I have this contour lines from dwg file (see attached) and I am trying to make a surface out of it. Initially i thought it is already a surface for C3D but i cant seem to follow tutorials. While browsing for solutions from the Internet, it seems it is not even a contour file that can be added in C3D. what is this file and how i can convert it into a surface in C3D?
View 5 Replies View RelatedAutoCad 3D :: How To Create Surface / Solid From Contour Lines
Apr 2, 2012I've been trying to lay a mesh on top of some contour lines. I've also tried the loft command, but with little success.
I've tried several terrain plugins, but they all seem to malfunction because I have overlapping contours. Here is the dwg, what I'm trying to make.
AutoCad 3D :: How To Create Mesh Or Surface From Contour Lines
Jun 25, 2011I'd like to be able to create a surface or mesh from contour lines to give a better 3D representation of terrain than just contour lines. "Drape" seems to be the tool ACA, but I'm wondering if AutoCAD can do something similar. LOFT sorta works, but even then, I have to do it in sections, and I'm not really looking for a solid.
View 7 Replies View RelatedAutoCAD Civil 3D :: Adding Custom Contour Lines?
Jul 26, 2012I am trying to add contour lines to a surface at very specific elevations (rain event elevations). I can add all the intervals I want but can't seem to figure out how to add a contour at a certain elevation.
View 2 Replies View Related