I wanted a picture-editing program but wasn't prepared to buy photoshop, so I saw Gimp as the answer! I got it, used it to colorize a black and white picture of a B-29 and it worked great! Next thing I know, Gimp is having trouble starting. I restarted the computer and Gimp would then work. After a while though, even re-downloading Gimp didn't work.
MacBook Intel Core Duo (32-bit)
Mac OS X 10.6.8 (Snow Leopard)
2GB of RAM
There is no crash report. With Bridge CS5 everything works fine. (Opening RAWs with minibridge CS6 works file too.)
View 5 Replies View RelatedI need to design a vinyl banner using GIMP. The size of the banner will be 4'X8'. What size should I set the starting image size WXH ?? Should I keep it at pixels instead of footage?
View 1 Replies View RelatedAfter installing GIMP 2.8.4 when launching program all I get is the LAYER-BRUSH Toolbox, no main window No menus,. it seems everything may be opening off screen but im not sure.
View 1 Replies View RelatedI already have an image file in png format..which I want to use as an application launcher icon for my android application.
The android specifies image with following properties for the launcher icon(Will need 4 different image to support different screen size in mobile devices)
Launcher icons should be 32-bit PNGs with an alpha channel for transparency. The finished launcher icon dimensions corresponding to a given generalized
Screen density are shown in the table below.
1. 36 * 36 px
2. 48 * 48 px
3. 72 * 72 px
4. 96 * 96 px
I would like to create 4 png files(with specifications mentioned above) from the already existing image file. How do I do that in GIMP.
I am completely novice to image editing(Never touched any image editing software before) and not sure how to achieve this in GIMP.
I have been using GIMP for a few weeks now and all of a sudden I cannot start the program anymore. During start up of GIMP 2.8 it displays a window saying it is loading data files. It gets as far as loading 'Tool presets' when it crashes. I tried restarting the computer and also uninstalling and re-installing GIMP with the same end result.
View 2 Replies View RelatedIs there a way to edit layers without deleting them and starting a new layer?
Example: I am creating a border on a separate layer. When I created the layer I set the X and Y sizes. As it turns out, I need to adjust the X and Y sizes. So far the only way I've been able to adjust this is by deleting the border layer and creating a new one.
I am having all sorts of trouble with my setup - 32bit windows 7 and 32bit CS6. I have a 2TB hard disk (with 1.7 unused) and 8GB Ram installed.
I understand that this setup has a maximum amount of 1.7GB ram available to CS6 and this may possibly be the problem. (see the attachment)
My D800 NEF images are around 40MB each. I get out of ram messages in Photoshop and the same in Bridge. In Bridge the 100% lupe takes forever to activate and eventually after several images it says the 100% lupe is unavailable. If I purge the cache it is OK again for just a few images. There appears to be no problem with smaller files, jpegs etc.
I will change the setup to 64bit CS6 on Win7 64bit if this is the only way to rectify the problem.
Now that I have CS4 running on XP I'm trying to do some real work with it. First thing I do is disable tabbed windows and other new features as they have yet to prove themselves useful in my workflow. Perhaps I'll grow to appreciate them. But for now I'm just trying to get the app to work with the good ol' floating windows.
1) Can I stop new images opening with a Window that's glued to the top left corner of my screen? Past versions of PS just opened a floating Window. CS4 obliges me to 'unstick' the Window from the top left corner every time I open a new image. I've scoured the preferences but have yet to find any way to turn off this feature.
2) When grabbing the top bar of an open image window to move it on my screen I find it to be sluggish. With previous versions of PS one would grab the top of the image window and move it quickly on your screen to wherever you want. The response was pretty will instantaneous. With CS4 there seems to be a very slight lag whereby the move is occurring slightly behind the cursor moving it. It's not a huge lag. Just enough to get the sense that there's something amiss. I'll try it in Vista64 to see if the same thing is occurring there.
before the latest updates to photoshop CC one could export from LR a series od Raw images to HDR Pro, create a 32bit file, save and editin LR or CR.
Now, when creating the 32bit file photshops promts a button for edting in Camera Raw instead of the usual "create file" (then to be saved and opened in LR). Which is ok, but if I edit the file in CR and then open it as a Tiff in LR the adjustments done in CR are not visible in the sliders, but not only, the images is of bad quality in LR.
Several of the filters I use regularly don't have 64 bit versions.
View 13 Replies View RelatedI just downloaded photoshop CS6 and I went to import video frames to layers but it says I need to use the 32 bit version. I had the same thing happen to me when I had CS5 so I looked up how to switch it and found out that I just had to right click on the photoshop app, click "Get Info", tick a box that says "32bit" and reopen the app. Well, I tried that with Photoshop CS6 but there is no option for 32 bit and now I don't know what to do.
View 1 Replies View RelatedI have 2009 and downloaded the 2012 trial (selecting 32bit as my OS). I'm trying to use a plugin and 2009 is too old, so if it works in 2012 I'll just upgrade. However during install it never gives me an option to install the 32bit/64bit version of 2012. It just auto-detects the OS and installs the 64bit.
how to get it to install the 32bit version? I tried the plugin with the 64bit and it doesn't work. I'm not sure if it's because 2012 is too new or if 64bit doesn't work for the plugin. The plugin is the Flare3D Max plugin if it matters.
Just want to know if this normal. The Opencl option can be checked in the 64 bit version of Photoshop but not the 32 bit. Just updated the drivers for the Intel HD 4000 graphics from the Intel website and Opencl is still not an option. HD 4000 supports OpenGL 4.0 and Opencl 1.1
So is it something I can fix or should I contact Intel about it?Here is the basic OS/video info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
I am trying to install Photoshop CS6 on my Windows 8 64-bit PC. While in the loader option I chose both 64 and 32 bit installations, I only get 64-bit to install and work properly, and the Program Files (x86) protoshop cs6 folder stays empty.
I tried to reinstall 32-bit alone, uninstall and full reinstall, I also checked for security permissions in Program files (x86)/Adobe and in Common files which seem OK, Administrators, Creator Owner and System have the desired Full control permissions and finally I apllied the latest adobe_creative_suite_cleaner_tool fix on all products and tried reinstall, to no avail.
The error I always get upon finishing installation is the below:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 14 error(s), 0 warning(s)
----------- Payload: {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:Program Files (x86)Common FilesAdobeInstallersadobeTemp{83463106-DD1C-4FE5-A61C-DF6715472AD 4}\_90_f004805aa933f587236382b1bac3bac1" to "C:Program Files (x86)Common FilesAdobeHelpCfgen_USExtensionManager.helpcfg" Error 5 Access is denied.(Seq 117)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 117)
[code]....
Just wondering if the CS6 will work on a 32 bit Windows 7 platform?
View 2 Replies View RelatedHow do I change to 32 bit mode in CC using mac OS 10.8.5? The "get info" pane no longer has the 32 bit mode option.
View 1 Replies View Related32 times and 16 reboots later Photoshop 32 bit keeps freezing and not responding on a 2 gig 5 layers PSD file.
Its not the OS, its not the file format of the drive, its not the machine, as it worked last week on CS6 Works on a 64 bit machine no problem.
I've only seen one thread that releates to this issue with no answer resolution. I have a reoccuring but where my layer comps display with elements moved into different positions from when I last saved the comp (all layer comps are set to save Visibility, Appaearance and Position).
This seems to always happen when I re-open a document, and frankly I'm getting sick of going back and fixing photoshop documents after I save all my comps to files. I can't imagine that this isn't a known issue or that others are not seeing the same thing.
setting compatibility to XP SP2 and running as Administrator gets one nowhere
View 1 Replies View Relatedwe should be able to switch using teh Get Info and activate the 32 bit switch. It looks like it works, but every time PS starts up it starts in 64 bit. This is happening on both a SL and Lion version of OS.
View 3 Replies View RelatedI just installed the trial version of PSCS6 using win xp pro sp3 32 bit. Plug-ins I added to the plug-in folder don't show up in the filter menu after re-start.
View 19 Replies View RelatedWhen I installed the downloaded Photoshop CS6 software, the application offered to install BOTH 64bit AND 32bit versions. Never seen that before, usually software looks at system and installs the correct version (or you choose before downloading).
I have Windows 7 64bit system. Is there a reason to install BOTH? Is there a problem to have both installed?
I have acquired a new Win 7 32bit laptop. Now when I debug in 2011, I can't use edit and continue. 2010, 2012 & 2013 are all fine. I installed all 4 from the installer with no changes.
View 3 Replies View RelatedI have discovered many plug-ins do not work with the 64bit version of CS4. These programs will work with a 32 bit version of CS4 on a 64 bit system.
Where do I get this 32 bit version? Do I need to dowload it or was it downloaded along side the 64 bit version when I purchased the upgrade (I purchased the download version). Should it already be in a folder somewhere and if so where?
I have huge files that are painfully slow to work with -ie 15,000 by 10,000 pixels, 1 - 1.5GB in size. I have the 32bit version of Vista, 4gb ram.
If I upgraded to 8gb ram, would it really be worth it? I know the faq says that PS can somehow utilize this extra ram, but would PS be "as snappy" as when it has enough ram in the first place? If actions that take 15 minutes with these files would only take as long as the ones with my 600MB files, then I would do probably it. Do u think this would this be a major performance upgrade or just a tiny one?
When I shoot images with a high dynamic range I use the AEB function to create an HDR image in PS merge to HDR Pro and save them as 32bit tiff.
Is it best to then process these in LR5 or to use the Camera Raw dialogue or is there no differance in exposure,highlights, shadows, whites, blacks and contrast functions whilst processing 32bit images?
Had a colour effect that was being used and it was only achieved by using a 32bit colour space. However the text came out jagged in the render. I changed the text to 16bit and all was fine. So question is why would the text be jagged in 32bit is there a specific reason for that?
View 11 Replies View RelatedDo I need to convert the original hi-res image file somehow to be able to save for web?
View 5 Replies View RelatedWhat are the advantages / disadvantages of using PS / CS5 in 64bit over 32bit ?
View 4 Replies View Relatedwhen opening an image into photoshop cs5 from bridge, how do I set the default from 32 bit to 64 bit
View 1 Replies View Related